Brooks Electronics RadioLINK EIB450 Bedienungsanleitung

Instruction Manual

Read and retain carefully for as long as the product is being used. It contains vital information on the operation and installation of your

Alarm Controller. The booklet should be regarded as part of the product.

If you are just installing the unit, the booklet must be given to the householder. The booklet is to be given to any subsequent user.

Model: EIB450

Alarm Controller

Fire and CO

Contents

1. Overview .................................................................................................................................................

2. Installation .............................................................................................................................................

3. House Coding ........................................................................................................................................

4. Operation ...............................................................................................................................................

5. Guarantee .............................................................................................................................................

6. Troubleshooting the RadioLINK .....................................................................................................

7. Technical Specification .....................................................................................................................

8. Getting your Alarm Controller Serviced ......................................................................................

9. System Diagnostics ............................................................................................................................

10. Contact Us ...........................................................................................................................................

Page

1. Overview

Congratulations on purchasing the single button Alarm Controller for RadioLINK Fire and Carbon

Monoxide (CO) Alarm systems. The Alarm Controller tests and controls Fire, CO and combined (Fire + CO)

RadioLINK Alarm systems.

Alarm Controller functionality

Function Description

Test All the Alarms can be tested from a centralised location

LocateThis will silence all the Alarms in the system except the one sensing Fire or CO

Silence This will silence the source Alarm(s)

Fire Indicator Indicates that a Fire Alarm has been activated

CO IndicatorIndicates that a CO Alarm has been activated

Low Battery IndicatorIndicates that the Alarm Controller battery has reached its end of life (EOL)

Memory

The memory feature only works with some RadioLINK Alarms -

The memory feature is confined to the system diagnostic mode and is not visible to the end user.

Fire / CO Alarm Controller

Fire

Indicator

House Code

Button

Front View of ControllerRear View of Controller

On / Off

Switch

System

Diagnostics

Mode

Button

Low Battery

Indicator

Light

Segments (4)

Test /

Control Button

MODE POWER H.CODE

OFFON

Wireless Smoke Alarm System Wireless Smoke &

Carbon Monoxide Alarm System

RF Smoke Alarm

Alarm Controller

RF Smoke Alarm

Model No. - Alarms Comment

EIB160e and EIB2110e Series Alarms The EIB100MRF RF module must be fitted

EIB140 and EIB2110 Series Smoke Alarms

Due to our continuous improvements policy, product performance and features are being frequently updated" - See Contact Us section

The Alarms must be fitted on EIB168RF RadioLINK bases

EIB605 and EIB650i Series Smoke Alarms

Alarms must be fitted with the correct EIB605 & EIB600 Series RadioLINK module

Ei208W & Ei208DW Carbon Monoxide Alarms The Alarms must be fitted with EIB200MRF RadioLINK modules

EIB170RF & other RadioLINK devices Contact us or visit our website for details

Works

with

RF CO Alarm

Universal Interface RF Smoke Alarm Alarm Controller Universal Interface

Typical System Layout

Install the Alarm Controller mounting plate at an accessible point on the

wall 1.4m +/- 0.2m from floor level. Consider an alternative location if

the controller will be operated by a disabled person.

Also consider security and chose a location where it will not be accidently

or otherwise operated.

Turn on the system by sliding the switch to the on position & check the

power up sequence.

A video of the Alarm Controller installation, house coding & operation is

available on our website - see ‘Contact Us’ section.

MODE POWERH.CODE

OFFON

Power up sequence

FIRE, BATTERY & CO indicators flash

Each individual segment lights up red

Each individual segment lights blue

Each individual segment lights green

After power up sequence all lights will go off to indicate standby mode.

3. House Coding

It is essential to House Code the Alarm Controller to all the other

RadioLINK Alarms and devices in the system to ensure they will not

communicate with nearby systems. Failure to house code the system

may also result in a system malfunction.

Press and hold the House Code button (H CODE) on the back of the

controller until all segments light up blue, then release. The segments

will flash rapidly for a moment on entering house code.

House code all other RadioLINK Alarms and devices in the system.

Consult the instruction manuals on how to house code the Alarms and

devices. It is essential that each individual Alarm / device is put into

house code mode in it’s actual location.

WARNING

Fire / CO Alarm Controller

MODE POWERH.CODE

OFFON

Return to the Alarm Controller and check that all segments are

flashing blue. The number of flashes should equal the number of

RadioLINK Alarms and devices in the system. A system with 3 x Smoke

Alarms, 1 x CO Alarm and 1 x Alarm Controller will result in 5 blue

flashes. It may take up to 10 minutes before all 5 flashes are seen.

The flash pattern will repeat every 5 to 10 seconds while the Alarm

Controller remains in house code.

If it fails to flash the correct number of times, then consult the

‘Troubleshooting the RadioLINK’ section of this instruction manual.

Now, walk around the house to verify that all the other RadioLINK

Alarms and devices are giving the correct amount of flashes.

If any of these fail to flash the correct number of times, then consult

the ‘Troubleshooting the RadioLINK’ section of this instruction

manual.

Fire / CO Alarm Controller

To complete the commissioning, the system must exit house code

mode.

The units will automatically exit house code after 30 minutes. Once

coded the system will not communicate with any other RadioLINK

Alarms and devices outside the house coded group.

To manually exit house code press the house code (H CODE) button on the

back of the Alarm Controller. When all the segments light up blue, release

the button. This unit will then send an exit house code signal to all the

other RadioLINK Alarms and devices to exit house code.

After a short period the blue light will turn off and the system will return

to standby mode (normal). Depending on the number of RadioLINK

Alarms and devices in the system this period could vary from 5 to 20

seconds.

If you choose to make the Alarm Controller tamper proof remove the

pip (plastic post) using a pliers or similar tool.

Do not do this until the house coding procedure has been completed!

MODE PO

Fire / CO Alarm Controller

MODE POWERH.CODE

OFFON

Inhaltsverzeichnis

Andere Brooks Controller Handbücher

Brooks

Brooks 609638 Bedienungsanleitung

Brooks

Brooks 5866 Bedienungsanleitung

Brooks

Brooks SLA7810 Series Bedienungsanleitung

Brooks

Brooks SLAMf Series Betriebsanleitung

Brooks

Brooks 5851EM Series Bedienungsanleitung

Brooks

Brooks 4860 Bedienungsanleitung

Brooks

Brooks 5850i Bedienungsanleitung

Brooks

Brooks MFM Bedienungsanleitung

Brooks

Brooks 5851i Bedienungsanleitung

Brooks

Brooks SLA5810 Bedienungsanleitung

Brooks

Brooks QMBC Bedienungsanleitung

Brooks

Brooks On-Board IS Bedienungsanleitung

Brooks

Brooks 4800 Series Betriebsanleitung

Brooks

Brooks GF100 Series Bedienungsanleitung

Brooks

Brooks SLA7950S Bedienungsanleitung

Brooks

Brooks Granville-Phillips Convectron 316 Series Bedienungsanleitung

Brooks

Brooks SLA7840 Bedienungsanleitung

Brooks

Brooks FAC20 Bedienungsanleitung

Brooks

Brooks GP200 Betriebsanleitung

Brooks

Brooks GF Series Bedienungsanleitung

Brooks

Brooks 5850EMH Bedienungsanleitung

Brooks

Brooks SLA5810/20 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung