Brookstone BKWIFICAM2 Bedienungsanleitung
USER MANUAL
For more products please visit www.brookstone.com
SMART CAMERA
FCC ID: 2AT5D-ZS-GX1
For more products please visit www.brookstone.com
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or
television reception,which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This
equipment should be installed and operated with minimum
distance between 20cm the radiator your body: Use only the
supplied antenna.
For more products please visit www.brookstone.com
SPECIFICATIONS
Model: BKWIFICAM2
Resolution:1280x720
Alarm: Motion detection
Night Vision: 8-10m
Sensor: 1.0 Megapixel 1/4 CMOS
Audio: Microphone & Speaker built-in
TF Card Storage: Up to 128GB
Compression: H.264
Power: 5V/1A (DC)
Operating System:
Android 8.0 or higher, iOS 7.0 or higher
WARRANTY INFORMATION
One Year Limited Warranty.
Customer Service Number: 732-994-2301
©Smartpoint LLC,
250 Liberty Street, Suite 1A
Metuchen, NJ 08840
The BROOKSTONE trademark. names and logos are owned by
BKST Brand Holdings LLC ©2019. All rights reserved
Manufactured, marketed and distributed by Smartpoint LLC, under license
Google and Google Play are trademarks of Google LLC.
App Store®is a registered trademark of Apple, Inc
All trademarks and Registered trademarks are property of their respective owners
Made in China
FEATURES
• Wi-Fi remote controlled through App
• Remotely control tilt and pan movement
of lens for 360° of coverage
• Night vision
• Motion detection
• Two way audio
• Live video
• Video recording
• Takes still photos
PRODUCT CONFIGURATION
Items included in package:
Camera, Adapter, USB Cable, Mounting kit
and User Manual.
Reset button
Status light
Lens
Microphone
SD card slot
Speaker
USB port
(SD card slot and reset button
can only be seen when camera
lens is pointed all the way up)
DOWNLOAD APP
Brookstone Smart
1. Android: download “Brookstone Smart” app
on GooglePlay.
2. iPhone: download “Brookstone Smart” app
from the App Store.
(SD card slot and reset button
can only be seen when camera
lens is pointed all the way up)
REGISTRATION AND LOGIN
1. Run the “Brookstone Smart” app from your
smart phone.
2. Register and login.
1. Plug in Wi-Fi Camera into the wall. After about
20 seconds it will make a chiming sound and
then the red light will start blinking rapidly.
Camera is now ready to be set up.
2. Make sure phone is connected to your Wi-Fi
network and that it is a 2.4GHz network.
3. Press the (+) symbol in the top right corner of
the app and select the Smart Camera from
the list of devices to add.
ADD DEVICE
1. Plug in Wi-Fi Camera into the wall. After about
20 seconds it will make a chiming sound and
then the red light will start blinking rapidly.
Camera is now ready to be set up.
2. Make sure phone is connected to your Wi-Fi
network and that it is a 2.4GHz network.
3. Press the (+) symbol in the top right corner of
the app and select the Smart Camera from
the list of devices to add.
4. Press the “next step” button
5. Make sure phone is connected to the Wi-Fi
network that the device will be connected to.
Enter your password for the Wi-Fi network.
6. Follow the directions in the app and hold the
QR code on the screen in front of the view of the
camera.
7. Connecting process will begin and status light will
turn blue. Do not turn off Smart Camera or phone
while connecting. Wait for connection process to
complete.
8. Once device has been successfully added, name
the device what you would like it to be called in
the app. The Smart Camera is ready for use.
4. Press the “next step” button
5. Make sure phone is connected to the Wi-Fi
network that the device will be connected to.
Enter your password for the Wi-Fi network.
6. Follow the directions in the app and hold the
QR code on the screen in front of the view of the
camera.
Inhaltsverzeichnis
