For Wireless Networks
To connect additional computers, repeat Method A for each computer.
For Wired Networks
To connect additional computers, repeat this procedure for each computer.
For USB Connections
Finish
Finish
Finish
Finish
Finish
Finish
Windows®
Macintosh
■Install MFL-Pro Suite
■Connect the USB cable
■Connect the network cable
■Set up your machine
■Install MFL-Pro Suite
■Install Brother iPrint&Scan
■Install MFL-Pro Suite
■Install MFL-Pro Suite
■Connect the USB cable
Follow the on-screen
instructions.
Internet access is required.
Follow the on-screen instructions
to continue installation.
Follow the on-screen instructions
to continue installation.
A USB cable may be needed in
some cases.
Follow the on-screen instructions
to continue installation.
Follow the on-screen instructions
to continue installation.
You can print from and scan to mobile devices using our free application
“Brother iPrint&Scan.”
Download and install the application from solutions.brother.com/ips.
1. Write your wireless access point/router information in the area below.
This information may be hidden on the bottom of the wireless access
point/router. If you cannot find it, ask your network administrator or
wireless access point/router manufacturer.
SSID (Network Name)
Network Key (Password)
2. Press on your Brother machine’s Touchscreen, and then press
Setup Wizard.
When Switch Network interface to wireless? is displayed,
press Yes.
3. Select the SSID you wrote down in 1. Press OK.
4. If the machine prompts you to enter a Network Key, enter the key you
wrote down in 1. Press OK.
5. Press Yes to apply your settings.
Put the CD-ROM into your CD-ROM drive. If
you do not have a CD-ROM drive, download the
software at:
For Windows®: solutions.brother.com/windows
For Macintosh: solutions.brother.com/mac
6Connect to your device and install software
Method A Setup from the computer
Method B Manual setup using the Setup Wizard
Make sure that you are logged on with
Administrator rights.
Make sure that you are logged on with
Administrator rights.
Make sure that you are logged on with
Administrator rights.
Follow the on-screen
instructions to continue
installation.
Make sure that you are logged on with Administrator rights.
Put the CD-ROM into your CD-ROM drive. If you do
not have a CD-ROM drive, download the software at:
For Windows®: solutions.brother.com/windows
For Macintosh: solutions.brother.com/mac
Make sure that you are logged on with Administrator
rights.
Download
5Choose your method
Go to 6For Wireless Networks Method B
Mobile
Go to 6For Wireless Networks
Method A or Method B
Wireless Network
Go to 6For Wired Networks
Wired Network
Go to 6For USB Connections
USB
Download
Download
Download
Put the CD-ROM into your CD-ROM drive. If
you do not have a CD-ROM drive, download
the software at:
For Windows®:
solutions.brother.com/windows
For Macintosh:
solutions.brother.com/mac
Put the CD-ROM into your
CD-ROM drive. If you do
not have a CD-ROM drive,
download the software at:
solutions.brother.com/windows
Put the CD-ROM into your CD-ROM
drive. If you do not have a CD-ROM
drive, download the software at:
solutions.brother.com/mac
© 2014 Brother Industries, Ltd. All rights reserved.
Brother support website http://support.brother.com
Download
Windows®Macintosh
Windows®Macintosh
Windows®Macintosh
