Brother P-touch D450 Bedienungsanleitung

www.brother.com

Read this User’s Guide before you start using your P-touch.

Keep this User’s Guide in a handy place for future reference.

Please visit us at http://support.brother.com/ where you can get product support and

answers to frequently asked questions (FAQs).

USER’S GUIDE D450

INTRODUCTION

Thank you for purchasing the P-touch D450.

This manual contains various precautions and basic procedures for using this

labeller. Read this manual carefully before using and keep in a handy place for

future reference.

International ENERGY STAR®Compliance Statement

The purpose of the International ENERGY STAR®Program

is to promote the development and popularisation of energy-

efficient office equipment. As an ENERGY STAR®Partner,

Brother Industries, Ltd. has determined that this product

meets the ENERGY STAR®guidelines for energy efficiency.

Information for compliance with Commission Regulation 801/2013

* All network ports activated and connected

Declaration of Conformity (Europe Only)

We, Brother Industries, Ltd.

15-1, Naeshiro-cho, Mizuho-ku,

Nagoya 467-8561 Japan

declare that this product and AC adapter are in conformity with the essential

requirements of all relevant directives and regulations applied within the

European Community.

The Declaration of Conformity (DoC) can be downloaded from the

Brother Solutions Center.

Visit http://support.brother.com/ and:

• select “Europe”

• select your country

• select “Manuals”

• select your model

• select “Declaration of Conformity”

• click “Download”

Your Declaration will be downloaded as a PDF file.

D450

Power consumption* 2.2 W

Compilation and Publication Notice

Under the supervision of Brother Industries, Ltd., this manual has been compiled

and published, covering the latest product’s descriptions and specifications.

The contents of this manual and the specifications of this product are subject to

change without notice.

If new versions of the D450 software become available, this manual may not reflect

the updated features. Therefore, you may find that the software and the contents

in this manual are different.

Any trade names and product names of companies appearing on Brother products,

related documents and any other materials are all trademarks or registered

trademarks of those respective companies.

BROTHER is either a trademark or a registered trademark of Brother Industries, Ltd.

INTRODUCTION

Contents

Safety Precautions................................................................................................. 4

General Precautions .............................................................................................. 6

GETTING STARTED.................................................................7

Unpacking Your P-touch ........................................................................................ 7

LCD Display & Keyboard ....................................................................................... 7

Power Supply and Tape cassette .......................................................................... 9

When using AC adapter (AD-E001) ............................................................... 9

When using six new AA alkaline batteries (LR6) or fully charged

Ni-MH batteries (HR6) .................................................................................... 9

Insert a Tape Cassette ................................................................................. 10

Turning Power On/Off .......................................................................................... 11

Setting Language and Unit .................................................................................. 11

Language...................................................................................................... 11

Unit ............................................................................................................... 11

Feeding Tape....................................................................................................... 11

Setting LCD Display............................................................................................. 11

LCD Contrast................................................................................................ 11

Back Light..................................................................................................... 12

How to use the P-touch ....................................................................................... 12

Create a label with the P-touch .................................................................... 12

Create a label by connecting your P-touch to a PC...................................... 13

EDITING A LABEL ..................................................................15

Entering and Editing Text .................................................................................... 15

Entering Text from the Keyboard..................................................................15

Adding a New Line ....................................................................................... 15

Adding a New Block ..................................................................................... 15

Deleting Text ................................................................................................ 15

Inserting a Tab.............................................................................................. 16

Using Text Reminder.................................................................................... 16

Deleting Text Reminder Memory.................................................................. 17

Changing the Text Reminder Setting ........................................................... 17

Entering Symbols................................................................................................. 17

Entering Symbols Using the Symbol Function ............................................. 17

Setting Symbol History ................................................................................. 17

Entering Accented Characters............................................................................. 18

Setting Character Attributes ([Font]/[Size]/[Width]/[Style]/[Line]/[Align]) .............. 19

Setting Character Attributes by Label........................................................... 19

Setting Character Attributes by Each Line.................................................... 19

Setting Auto Fit Style .................................................................................... 22

INTRODUCTION

Setting Frames .................................................................................................... 22

Setting Label Attributes ([Length]/[Cut Option]/[Tab Length]).............................. 23

Using Auto-Format Layouts ................................................................................. 24

Using Templates........................................................................................... 24

Using Block Layouts ..................................................................................... 27

Creating a Barcode Label.................................................................................... 29

Setting Barcode Parameters and Entering Barcode Data............................ 29

Editing and Deleting a Barcode.................................................................... 31

LABEL PRINTING ...................................................................32

Previewing Labels................................................................................................ 32

Printing Labels ..................................................................................................... 32

Single and Multiple Copy Printing................................................................. 32

Numbering Printing....................................................................................... 33

Mirror Printing ............................................................................................... 33

Setting Tape Cutting Options............................................................................... 33

[Large Margin]/[Small Margin]/[Chain]/[No Cut]/[Special tape] ..................... 33

Adjusting the Label Length .................................................................................. 35

Printing from the Label Collection........................................................................ 36

Printing a label from the label collection stored in the P-touch..................... 36

Downloading a new Label Collection Category ............................................ 37

USING THE FILE MEMORY ...................................................38

Saving Label Files ............................................................................................... 38

Printing, Opening, or Deleting a Saved Label...................................................... 38

[Print] ............................................................................................................ 38

[Open]........................................................................................................... 38

[Delete] ......................................................................................................... 38

RESETTING & MAINTAINING YOUR P-TOUCH ...................39

Resetting the P-touch .......................................................................................... 39

Resetting the Data Using the home key ....................................................... 39

Resetting the Data to Factory Settings Using the P-touch Keyboard........... 39

Maintenance ........................................................................................................ 40

Cleaning the Unit .......................................................................................... 40

Cleaning the Print Head ............................................................................... 41

Cleaning the Tape Cutter .............................................................................41

TROUBLESHOOTING ............................................................42

What to do when.................................................................................................. 42

When an error message appears on the display .................................................43

INTRODUCTION

APPENDIX ..............................................................................44

Specifications....................................................................................................... 44

System Requirements ......................................................................................... 45

INTRODUCTION

Safety Precautions

To prevent injury and damage, important notes are explained using various

symbols. The symbols and their meanings are as follows:

The symbols used in this manual are as follows:

WARNING Indicates a potentially hazardous situation which, if not

avoided, may result in death or serious injuries.

CAUTION Indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate injuries.

Action NOT allowed DO NOT touch a given portion of

the product

Mandatory action Unplugging is required

DO NOT disassemble the product Alerts to the possibility of

electrical shock

WARNING

Follow these guidelines to avoid the risk of fire, burns, injury, electric shocks,

rupture, overheating, abnormal odours or smoke.

Always use the specified voltage

and the suggested AC adapter

(AD-E001) for the P-touch to

prevent any damage or failure.

Do not touch the AC adapter and

P-touch during a thunder storm.

Do not use the P-touch/AC adapter

in places of high humidity such as

bathrooms.

Do not damage, or place heavy

objects on the power cord or plug.

Do not forcibly bend or pull the

power cord. Always hold the AC

adapter when disconnecting from

the power outlet.

Make sure that the plug is fully

inserted in the power outlet. Do not

use an outlet that is loose or

damaged.

Do not allow the P-touch/AC

adapter/power plug/batteries to get

wet, for example, by handling them

with wet hands or spilling liquids on

to them.

Since loss of eyesight may result

when leaked fluid from batteries

gets into your eyes, immediately

rinse your eyes with a large amount

of clean water, and then seek

medical attention.

Do not disassemble or modify the

P-touch/AC adapter/batteries.

Do not allow a metal object to

contact both the plus and minus

ends of a battery.

Do not use sharp objects, such as

tweezers or a metallic pen, to

change the batteries.

Do not throw the batteries into fire

or expose to heat.

Disconnect the AC adapter and

remove batteries immediately and

stop using the P-touch if you notice

abnormal odour, heat,

discolouration, deformation or

anything unusual while using or

storing it.

INTRODUCTION

Safety Precautions

Do not use a damaged or leaking

battery as the fluid may get on your

hands.

Do not use a deformed or leaking

battery or one whose label is

damaged. There is a possibility of it

generating heat.

Do not touch metal parts around

the print head immediately after

printing.

When the P-touch is not being

used, store it out of the reach of

children. In addition, do not allow

children to put any P-touch parts or

labels in their mouths. If any object

has been swallowed, seek medical

attention.

Do not use a damaged adapter

cord or power plug.

Do not use the P-touch if a foreign

object enters the P-touch. If any

foreign object enters the P-touch,

disconnect the AC adapter and

remove the batteries, and contact

Brother customer service.

CAUTION

Follow these guidelines to avoid personal injury, liquid leakage, burns or heat.

Do not touch the cutter blade.

If leaked fluid from batteries gets on

your skin or clothes, immediately

rinse them with clean water.

Remove the batteries and

disconnect the AC adapter if you do

not intend to use the P-touch.

Do not use a battery other than that

specified. Do not use combinations

of old and new batteries or

combinations of different types,

different charging levels, different

manufacturers or different models.

Do not insert a battery with the

polarity (+ and -) reversed.

Do not drop or hit the P-touch/

AC adapter.

Do not press on the LCD display.

Do not put your finger inside the

P-touch when you close the tape

cassette compartment cover or

battery compartment cover.

Before using Ni-MH rechargeable

batteries, carefully read the

instructions for the batteries and

battery charger, and be sure to use

them correctly.

When using Ni-MH rechargeable

batteries, charge the batteries with

a specialised battery charger

before using the batteries.

WARNING

INTRODUCTION

General Precautions

• Depending on the location, material, and environmental conditions, the label may

unpeel or become irremovable, or the colour of the label may change or be

transferred to other objects. Before applying the label, check the environmental

conditions and the material.

• Do not use the P-touch in any way or for any purpose not described in this guide.

Doing so may result in accidents or damage to the P-touch.

• Use Brother TZe tapes with the P-touch.

• Only use a soft, dry cloth to clean the labeller; never use alcohol or other organic

solvents.

• Use a soft wipe to clean the print head; never touch the print head.

• Do not put any foreign objects into the tape exit slot, AC adapter connector or

USB port, etc.

• Do not place the P-touch/batteries/AC adapter in direct sunlight or rain, near

heaters or other hot appliances, in any location exposed to extremely high or low

temperatures (e.g., on the dashboard or in the back of your car) or high humidity,

or in dusty locations.

• Do not apply excessive pressure to the cutter lever.

• Do not try to print if the cassette is empty; it will damage the print head.

• Do not pull the tape while printing or feeding; it will damage the tape and the

P-touch.

• It is recommended that you use the USB cable supplied with the P-touch. Should

another USB cable need to be used, ensure it is of high quality construction.

• Any data saved in memory may be lost due to failure or repair of the P-touch, or

if the battery expires.

• The P-touch is not equipped with a charging feature for rechargeable batteries.

• The printed text may differ from the text that appears on the LCD.

• The length of the printed label may differ from the displayed label length.

• When power is disconnected for two minutes, all text, format settings and any text

files saved in the memory will be cleared.

• You can also use Heat Shrink Tube in this model. Check the Brother website

(http://www.brother.com/) for further information. You cannot print frames,

pre-set P-touch templates, or use certain font settings when using Heat Shrink

Tube. Printed characters may also be smaller than when using TZe tape.

•A protective clear plastic sticker is placed over the display during

manufacturing and shipping. This sticker should be removed prior to use.

Unpacking Your P-touch

GETTING STARTED

Unpacking Your P-touch

LCD Display & Keyboard

Carton Contents

P-touch

Starter Tape Cassette

AC adapter

USB Cable

User’s Guide

87123456

11 12

15 16 17 18 19 20

32 31 30 29 28

The default language is [English]

Andere Handbücher für P-touch D450

Inhaltsverzeichnis

Andere Brother Etikettendrucker Handbücher

Brother

Brother PT-85 Bedienungsanleitung

Brother

Brother P-touch QL-1050N Bedienungsanleitung

Brother

Brother P-TOUCH PT-1230PC Bedienungsanleitung

Brother

Brother PT-90 Bedienungsanleitung

Brother

Brother P-touch PT-2700 Bedienungsanleitung

Brother

Brother P-Touch M95 Bedienungsanleitung

Brother

Brother P-touch PT-D600 Bedienungsanleitung

Brother

Brother P-touch PT-65 Handbuch

Brother

Brother 1250 Bedienungsanleitung

Brother

Brother P-touch E110 Bedienungsanleitung

Brother

Brother PT 1950 - P-Touch 1950 B/W Thermal Transfer... Bedienungsanleitung

Brother

Brother andtrade; QL-570VM Bedienungsanleitung

Brother

Brother P-touch 85 Bedienungsanleitung

Brother

Brother P-touch PT-E105 Bedienungsanleitung

Brother

Brother QL-1110NWB Bedienungsanleitung

Brother

Brother P-touch D210 Bedienungsanleitung

Brother

Brother DCP-1000 Bedienungsanleitung

Brother

Brother P-touch PT-3600 Bedienungsanleitung

Brother

Brother P-TOUCH P700 Bedienungsanleitung

Brother

Brother PT 2300 - P-Touch 2300 Thermal Transfer... Bedienungsanleitung

Brother

Brother P-Touch 2420PC Bedienungsanleitung

Brother

Brother PT-H300/H300LI Bedienungsanleitung

Brother

Brother P-Touch 540 Bedienungsanleitung

Brother

Brother QL-1050 Versionshinweis

Beliebte Etikettendrucker Handbücher anderer Marken

newell

newell Dymo LabelManager 210D Bedienungsanleitung

U-Line

U-Line BROTHER H-8754 Bedienungsanleitung

Tharo Systems

Tharo Systems H-435+ Bedienungsanleitung

Godex

Godex RT700 SERIES Bedienungsanleitung

ID Technology

ID Technology 252 Bedienungsanleitung

Labelmate

Labelmate MC-11 Bedienungsanleitung

CAB

CAB XD4M/300 Bedienungsanleitung

Avery Dennison

Avery Dennison Pathfinder 6057 Service-Handbuch

TSC

TSC PEX1000 Series Bedienungsanleitung

Adkins

Adkins Label Master Bedienungsanleitung

Epson

Epson LabelWorks LW-400 Bedienungsanleitung

Primera

Primera 510212 Bedienungsanleitung

Brady

Brady BradyPrinter S3100 Bedienungsanleitung

DuraLabel

DuraLabel LabPRO Bedienungsanleitung

Novexx Solutions

Novexx Solutions XLP 604 Bedienungsanleitung

Epson

Epson LabelWorks LW-400 Bedienungsanleitung

Dymo

Dymo LabelManager 420P Bedienungsanleitung

Epson

Epson LW-PX400 Bedienungsanleitung