Brother HL-1030 Bedienungsanleitung

Laser Printer HL-1030/1240/1250/1270N

Quick Setup Guide

Read this Setup Guide before you set up the printer.

Before you can use the printer, you must set up the hardware and install

the driver.

❏Identify the Operating System on your computer (Windows®3.1x,

95/98, NT®4.0 or Macintosh)

❏Purchase the appropriate interface cable for your computer

(Parallel, USB *1 or Network *2)

❏Follow the instructions in this guide for your operating system

and cable interface.

countries. Macintosh and iMac are registered trademarks of Apple Computer, Inc.

All other brand and product names are trademarks or registered trademarks of their respective holders.

Table of Contents

Carton Components

For Windows

users only

(Windows

3.1x, 95/98 or NT 4.0)

You can set up the printer easily by following the Initial Setup instructions on

the CD-ROM.

For Windows

users without CD-ROM drive only

(Windows

3.1x, 95/98)

If you don’t have a CD-ROM drive, follow the instructions in this section.

For Windows

users with USB only

(Windows

98 / Not HL-1030)

The steps in this section are essential for USB interface cable users.

For Macintosh users only

(iMac and Power Macintosh G3 with USB / Not HL-1030)

You can setup the printer by following the Initial Setup instructions on the supplied

CD-ROM

Troubleshooting

For Network users

See the Quick Network Setup Guide (HL-1270N only)

Carton Components

Carton Components may differ from one country to another. Save all packing

materials and the printer carton. They should be used when shipping the printer.

✒Note

Some illustrations are based on the HL-1240/1250 printers. The HL-1270N printer

has a Network interface fitted in the back panel of the printer.

CD-ROM includes : Initial Setup instructions

Printer driver

Fonts

User’s Guide

Instructional Video

Network Utilities *2

Floppy disk includes: Printer driver for Windows®only

*1 Not HL-1030

*2 Only HL-1270N

AC power cord

Drum unit assembly

(with toner cartridge included)

Floppy disk

ocu

CD-ROM

Printer

ForWindows

users only

(Windows

3.1x, 95/98

or NT

4.0)

You can set up the printer easily by following the Initial Setup instructions on the

CD-ROM.

Step 1 Insert the CD-ROM

1. Turn on your PC power. Insert the CD-ROM into the CD-ROM drive.

The opening screen will appear automatically in Windows®95/98/NT®4.0.

If the screen does not appear, click Start and choose Run, enter the CD drive letter

and type START.EXE.

If you are using Windows®3.1x, click Run from the File Menu in Program

Manager, enter the CD drive letter and type START.EXE.

2. Click the model number of your

printer.

3. Select the language you want then

follow the instructions on the

screen.

Step 2 Initial Setup

1. Click the Initial Setup button.

2. You can view the Initial Setup

operations in the video movie.

3. Click the interface cable you are

going to use Parallel, USB or

Network.

Step 3 Install the printer driver

1. If you click the Now button, you

can install the printer driver and

Fonts immediately.

2. After the printer driver has been

installed, the HL-1030/1240/1250/

1270N window will appear. Follow

the on-screen messages to complete

the installation.

If your printer is connected using a parallel interface cable, the setup is now

completed. If you want to connect your printer using a USB interface cable, see

‘For Windows

users with USB only (Windows

98 / Not HL-1030)’

later in these instructions.

When you want to connect your printer to a network, refer to the “Quick Network

Setup Guide”.

ForWindows

users with no CD-ROM drive

only

(Windows

3.1x, 95/98)

If you don’t have a CD-ROM drive, follow the instructions in this section.

Step 1 Install the drum unit assembly

1. Open the front cover.

2. Unpack the drum unit assembly. Rock it from side to side 5 or 6 times to

distribute the toner evenly inside the cartridge.

3. Install the drum unit assembly into the printer.

4. Push it fully into the printer until it snaps into place.

5. Close the front cover.

Step 2 Load paper into the paper cassette

1. Pull the paper cassette completely out of the printer.

2. Slide the paper width and length adjusters to the paper size you want until they

snap into a slot.

3. Load paper into the paper cassette. Check that the paper is flat in the tray.

4. Re-install the paper cassette into the printer.

Step 3 Print a test page

1. Make sure that the power switch is off. Connect theAC power cord to the

printer.

2. Plug the AC power cord into an AC outlet. Turn on the power switch.

3. After the printer has warmed up, the Ready LED stops blinking and stays lit.

4. Press the control panel button. The printer will print a test page. Check that

the test page has printed correctly.

Step 4 Connect the printer to your PC

1. Turn the printer power off.

2. Connect the parallel interface cable to your PC then connect it to the printer.

3. Use the clips on the printer connector to secure the parallel interface cable.

4. Turn on the printer power.

Step 5 Install the printer driver from floppy disk

1. Turn on your PC power. If the "Add

New Hardware Wizard" window

appears, click the Cancel button.

2. Insert the floppy disk into the floppy disk drive. (For Windows®3.1x users, please

follow the instructions on the disk label.)

3. Click Start and select Run.

4. Type A:\SETUP andclicktheOK

button. Follow the instructions on

the screen. The printer driver will

be installed and the setup will be

completed.

ForWindows

users with USB only

(Windows

98 / Not HL-1030)

The steps in this section are essential for USB interface cable users.

Step 1 to 3 Follow the CD-ROM instructions at the beginning of these instructions

Step 4 Install the USB driver

1. Make sure the printer power switch is on.

2. Connect the USB interface cable to your PC then connect it to the printer.

3. The "Add New Hardware Wizard"

window will appear. Click the Next

button.

Andere Handbücher für HL-1030

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Brother Laserdrucker Handbücher

Brother

Brother MFC-J2510 Bedienungsanleitung

Brother

Brother MFC-7360 Bedienungsanleitung

Brother

Brother MFC-L8600CDW Bedienungsanleitung

Brother

Brother HL-2130 Bedienungsanleitung

Brother

Brother HL-1112 Bedienungsanleitung

Brother

Brother HL-2130 Bedienungsanleitung

Brother

Brother HL-L6250DW Technisches Handbuch

Brother

Brother DCP-J152W Betriebsanleitung

Brother

Brother DCP-L8450CDW Bedienungsanleitung

Beliebte Laserdrucker Handbücher anderer Marken

Ricoh

Ricoh SP 310 DN Bedienungsanleitung

Lexmark

Lexmark XC4100 Series Bedienungsanleitung

Ricoh

Ricoh SP 320DN/SP Bedienungsanleitung

Samsung

Samsung ML-2550 Bedienungsanleitung

Kyocera

Kyocera Ecosys P2235dn Bedienungsanleitung

Panasonic

Panasonic DP-CL21 Series Bedienungsanleitung

Xerox

Xerox DocuPrint 92C NPS Bedienungsanleitung

Ricoh

Ricoh Aficio SP 3500N Bedienungsanleitung

Oki

Oki B840n Bedienungsanleitung

Samsung

Samsung ProXpress M4020 Bedienungsanleitung

Konica Minolta

Konica Minolta magicolor 7450 II Bedienungsanleitung