Brother GT-541 Merkblatt

GT541 INSTALL PROCEDURES

Machine Weight 220 lbs.

 Crate is shrunk wrapped and strapped

1. Remove wrap and straps

2. Remove Top - first remove clips that holds top in place.

3. Remove card board internal sidings

• Remove thin cardboard top

• Remove accessory box

• Thin boards go on left and right sides of machine

• Thick boards go on Front and Back side of machine

• Remove box sides – surrounding of crate – first remove clips that hold

bottom in place.

• Remove plastic wrap from machine

4. Unscrew 4 screws from 2x2’s that secures machines to pallet.

• Lift machine to table top—make sure that table top is strong enough to

hold machine for long period of time, machines weight is 220 lbs so if

table is not strong enough can warp top or break table in long term.

5. Remove 2x2’s from bottom of machine when on tabletop.

• Replace screws back on machine after 2x2’s have been removed. (Optional)

 Install/Training

Follow Install Checklist for set-up

1. Inspect machine and room conditions

2. Level Machine (Pull platen out very slowly for level placement)

3. Open cover - Remove cardboard holder(s) from tubes and maintenance

station.

4. Lower rubber caps by rotating gear on the right side of the maintenance

station, slide head carriage to the center of the machine (this will give you

more room for installing heads)

5. Use jig to make sure maintenance station has not shifted during shipping (see

maintenance station adjustment)

6. Install heads

• Use Rubber Gloves

• First 20 machines will come with heads labeled for each color cartridge.

• Hold heads from metal bracket when installing.

• Careful not to drop heads

 Clip heads in place after its station in the carriage

 Install Ribbon Cable (silver strips to the front)

 Install tube

 Remove protector plate

7. Install waste cartridge (Remove shipping cardboard insert from tray and

install cartridge from accessories box.

8. Install ink cartridges (Store filter cartridges on printer shelf)

9. Connect power cable – Power up

10. Introduce of Ink

• Go into advance test mode to initialize inks

• Press ▼to highlight Version

• Press ▼▲ and cancel in this sequence

• Press ▼to Initial Cleaning and then OK

• When initialize is done back out with enter key or cancel key.

11. Install back cover while the machine is introducing ink; verify customer has

received all other accessories, verify the curing process the customer will be

using is what we recommend.

12. Test Print

• Place 8.5x11 sheet of paper on lower right corner closest to you

• Verify platen height is set to A position

• Press one of the menu button to get into the menu screen

• Press ▼to highlight Test Print

• Press OK

• Select Nozzle Check

• Press OK

• Watch print

Note: Continue to test print until you get all nozzles to fire, you will

need to purge during this process, follow flow chart from your service

manual for reference.

• Turn off printer

13. Install printer driver (File Output) to customers PC without the printer

connected to PC (follow on screen steps).

14. Connect USB cable to PC and Printer and power up the printer, the

installation of the printer driver will auto start (follow on screen steps).

15. Run GT Service Tool from your USB stick (read each screen carefully do not

move forward until the current task is complete)

• Set Printer Date and Time

• Heads Firing Adjustment (To calibrate all heads)

At this point the left side of your installation form should be complete, you are ready to

customize the customer software application (color management, page setup, color

palettes (see Cookbook for reference)) and start training.

Andere Handbücher für GT-541

Inhaltsverzeichnis

Andere Brother Drucker Handbücher

Brother

Brother HL-2700CN Series Bedienungsanleitung

Brother

Brother DCP-T220 Bedienungsanleitung

Brother

Brother HL-7050 Series Bedienungsanleitung

Brother

Brother HL-L9310CDWT Bedienungsanleitung

Brother

Brother HL-5240 Bedienungsanleitung

Brother

Brother MFC-J775DW Bedienungs- und Wartungshandbuch

Brother

Brother HL-1030 Bedienungsanleitung

Brother

Brother PJ-722 Betriebsanleitung

Brother

Brother DCP-L5518DN Bedienungsanleitung

Brother

Brother HL-L8260CDN Bedienungsanleitung

Brother

Brother SP-1 Technisches Handbuch

Brother

Brother MFC490CW - Color Inkjet - All-in-One Einrichtungshandbuch

Brother

Brother HL-L6300DW Bedienungsanleitung

Brother

Brother DCP-J774DW Technisches Handbuch

Brother

Brother RJ-2035B Bedienungsanleitung

Brother

Brother m-PRINT MW-100 Bedienungsanleitung

Brother

Brother HL-5040 Bedienungsanleitung

Brother

Brother HL-3075CW Bedienungsanleitung

Brother

Brother HL 760 - B/W Laser Printer Bedienungsanleitung

Brother

Brother HL-L3210CW Bedienungsanleitung

Brother

Brother GTX Series Bedienungsanleitung

Brother

Brother MFC-8950DW Bedienungsanleitung

Brother

Brother HL-3400CN Series Bedienungsanleitung

Brother

Brother MFC-L8900CDW Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung