Bruno CRE-2110 Bedienungsanleitung

REV. 08-16-2010

CRE-2110

ELECTRA-RIDE™ III

STAIRWAY ELEVATOR

Operator’s Manual

Retail Customers

Please contact your Bruno dealer with any questions or service concerns,

using the contact information shown below:

(Dealer: Place contact information below.)

Dealer Name:

Address:

Telephone No.:

Dealer Name: Gamburd Inc.

Address: 12405 Montague St. Los Angeles, CA 91331

Telephone No.: (888) 902-2237

PRODUCT REGISTRATION FORM

Bruno is pleased to provide you with this

mobility-enhancing product.

The Product Registration Form is shipped in

a plastic bag with this manual. It is very

important that you ll out and return this

form at your earliest convenience so that we

may complete the warranty registration process

for your unit.

The serial number is found on labels afxed

to the manual, as well as on the unit itself.

Serial and model numbers must be provided

when ling a warranty claim, requesting service

or ordering parts. We encourage you to keep

this information readily available at all times.

Please Note: The warranty for the CRE-2110

Stairway Elevator is rendered null

and void if the unit is installed by

anyone other than an authorized

Bruno dealer.

Best wishes from the Bruno Team.

Product Registration Form

Please print in

CAPITAL

letters.

*First Name ______________________________________________________ M.I._____

*Last Name _______________________________________________________________

*Street Address________________________________________________ Apt. No._____

*City _____________________________________________ *State/Province _________

*Zip/Postal Code ___________________________________________________________

Email Address _____________________________________________________________

Telephone No. _____________________________________________________________

Date of Purchase (mm/dd/yy) _________________________________________________

Model No._________________

*Serial No._________________

Please be assured that Bruno does not share or sell the information you provide.

Please rate your satisfaction with your Bruno dealer:

excellent good average poor

Please rate your satisfaction with your Bruno product:

excellent good average poor

Bruno reserves the right to use information indicated on this form in its online, video, audio and printed

materials. Names will be abbreviated to ensure the privacy and anonymity of the individual.

Online registration available at http://www.bruno.com/warranty.html

P/N PROD REG STD

Rev. 04-01-07

* = required ﬁ eld

SAMPLE

Table of Contents

Regulatory Information and Specications .............4

Safety .................................... 5-6

PartsoftheCRE-2110...........................7

CircuitBreaker ................................8

Seating .....................................9

Operation................................ 10-21

Standard Swivel Seat . . . . . . . . . . . . . . . . . . . . 10-11

PowerSwivelSeat..........................12

Optional Mid-Park Position............... 13-14

PowerFootrest............................15

FoldingRail ........................... 16-17

Optional Power Folding Rail .............. 18-21

DiagnosticCodes..............................22

Charging ...................................23

BatteryCharger............................ 24-25

Maintenance/Transmitter Battery Replacement . . . . . . . . . 26

Troubleshooting............................ 27-28

Vacation and Long-Term Storage . . . . . . . . . . . . . . . . . . . 29

Warranty ................................ 30-31

FCC REGULATIONS

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy, and if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the of the

following measures:

• Reorient or relocate receiving antenna.

• Increase separation between equipment and receiver.

• Consult your dealer.

SPECIFICATIONS

Weight Capacity: 400 lbs. (181 kg)

Control: constant pressure (armrest and two remotes)

Maximum Incline: 45 degrees

Seat Swivel: 0, 60 and 90 degrees at top

Power Supply: 24VDC battery charger powered by 120V outlet

FOR YOUR SAFETY

• Read and understand the operating instructions, and all safety precautions prior to

using the CRE-2110.

• Be sure stairs are clear of objects before operating the stairway elevator.

• Always be aware of the surface onto which you are stepping as you get on and off the

stairway elevator.

• Avoid carrying items with you on the stairway elevator which could hinder movement

of the elevator up and down the stairs.

• Do not wear LOOSE clothing that could interfere with elevator movement.

• Fasten your positioning belt before operating the stairway elevator.

• Make sure the seat is locked in the correct riding position.

• Be certain the seat swivel is locked in place before attempting to get on or off the

stairway elevator.

• NON-AMBULATORY USERS: Bruno recommends carrying a cellular or cordless

telephone or an emergency communication device when riding the stairway elevator

while alone in the house.

FOR YOUR SAFETY

Each stairway elevator is designed to travel down the stairway at a slightly slower speed

than is the case when travelling UP.

The footrest is equipped with obstruction sensors which stop the carriage if an obstacle is

encountered on the stairs.

If this should occur, press the opposite side of the UP/DOWN rocker control switch (on

the armrest) to run the carriage in the opposite direction. Clear the obstacle from the

stairway or rail then resume travel in the desired direction.

Your CRE-2110 is battery powered and will continue to operate for some time during a

power outage. The length of operation will depend on the battery condition, the length of

the stairs and the weight of the rider.

Only in the event of a prolonged power outage (more than one hour) will it be necessary

to turn the power off (circuit breaker switch on the carriage) and unplug the charger from

the wall outlet to conserve battery charge.

The power swivel seat option is equipped with current overload sensing to prevent

further seat swivel if a jam is detected.

The power footrest option is equipped with current overload sensing that will cause

the footrest to return to its last position if a jam is detected.

CRE-2110

armrest

positioning belt

UP-DOWN

rocker switch

swivel release

handle footrest lever

obstruction

sensors

CIRCUIT BREAKER

The CRE-2110 includes an ON/OFF switch

with a built-in circuit breaker.

The circuit breaker protects the battery,

controller and motor circuits in the stairway

elevator carriage.

It is unlikely that this circuit breaker will trip

during normal use. However, if the elevator

becomes inoperative, check the circuit breaker

as a rst troubleshooting step. Reset it, if

necessary.

Possible causes of circuit breaker tripping:

• foreign object jamming the rail or gear

rack;

• exceeding the rated weight capacity of the

stairway elevator.

ON/OFF switch

with built-in

circuit breaker

The CRE-2110 seat assembly (with standard

armrests) is designed to swivel a total of

135 degrees.

It locks in the center (home) position, and

in positions 60 and 90 degrees to the up

side and 45 degrees to the down side.

Lift up on the swivel release lever located

under the seat (either side) to swivel the

seat to a convenient position for transferring

into or out of the seat.

Once you release the swivel lever, the seat

will lock in the closest of the four positions

indicated above.

The seat also ips up to facilitate storage.

SEATING

swivel release

handle

OPERATION

The CRE-2110 includes a

“soft-start” feature which

prevents the unit from moving

abruptly the instant the

UP/DOWN switch is pressed.

Press and hold the switch for

a moment to begin the gentle

acceleration of the stairway

elevator to operating speed.

STANDARD SWIVEL SEAT

1. Position yourself in the seat.

2. Fasten the positioning belt.

3. Raise and hold the seat swivel lever.

4. Rotate the seat so that you are at right

angles to the rail (with your back to the

stairway wall).

5. Release the seat swivel lever to secure the

seat in that position.

A safety switch prevents operation of the

CRE-2110 unless the seat is locked in

position at right angles to the rail (the

“riding” position).

6. Position both feet securely on the footrest and

place your arms on the armrest cushions.

7. Press and hold the rocker switch (located

on the front edge of one of the armrests) to

travel UP / DOWN the rail.

Depressing and holding the

rocker switch will cause the

carriage to move until the

carriage stops automatically at

the upper or lower end of the

stair rail, or until the switch is

released.

Andere Handbücher für CRE-2110

Inhaltsverzeichnis

Andere Bruno Treppenlift Handbücher

Bruno

Bruno ELITE SRE-2010 Bedienungsanleitung

Bruno

Bruno ELITE Bedienungsanleitung

Bruno

Bruno ELITE SRE-2010 Bedienungsanleitung

Bruno

Bruno SRE-1550 Electra-Ride II Bedienungsanleitung

Bruno

Bruno ELAN SRE-3050 Bedienungsanleitung

Bruno

Bruno SRE-3000 Elan Bedienungsanleitung

Bruno

Bruno ELECTRA-RIDE SRE-1540 Bedienungsanleitung

Bruno

Bruno SRE-3000 Elan Bedienungsanleitung

Bruno

Bruno ELAN SRE-3050G Bedienungsanleitung

Bruno

Bruno ELECTRA-RIDE II Bedienungsanleitung

Bruno

Bruno OUTDOOR ELITE SRE-2010E Bedienungsanleitung

Bruno

Bruno SRE-3000 Elan Bedienungs- und Montageanleitung

Bruno

Bruno ELAN SRE-3050 Bedienungsanleitung

Bruno

Bruno OUTDOOR ELITE CRE-2110E Bedienungsanleitung

Beliebte Treppenlift Handbücher anderer Marken

Lehner Liftechnik

Lehner Liftechnik ALPHA Bedienungsanleitung

AAT

AAT C-max Bedienungsanleitung

Atlas

Atlas Rave 2 Bedienungsanleitung

Atlas

Atlas ATLAS 600 Bedienungsanleitung

Handicare

Handicare 1100 Bedienungsanleitung

ThyssenKrupp

ThyssenKrupp Flow2 Bedienungsanleitung

Ascendor

Ascendor PLG7 Produktinformationsblatt

Handicare

Handicare 2000 Bedienungsanleitung

Lehner Lifttechnik

Lehner Lifttechnik Stairmax Bedienungsanleitung

liftup

liftup FlexStep V2 Bedienungsanleitung

vimec

vimec V64-74 B.I. Bedienungsanleitung

AmeriGlide

AmeriGlide Titan Incline Lift Bedienungsanleitung

Handicare

Handicare Freecurve Classic Bedienungsanleitung

Access

Access Flow2A Bedienungsanleitung

BraunAbility

BraunAbility NL 2 Millennium Series Bedienungsanleitung

Lippe Lift

Lippe Lift T80 Bedienungsanleitung

Lehner Liftechnik

Lehner Liftechnik ALPHA Bedienungsanleitung

vimec

vimec STAIRLIFT V70 Bedienungsanleitung