BT DIVERSE 5000 SOLO Bedienungsanleitung

User Guide

BT DIVERSE 5000 SOLO

T is equipment is not designed for making

emergency telep one calls w en t e power

fails. Alternative arrangements s ould be

made for access to emergency services.

T is product is intended for connection to

analogue public switc ed telep one networks

and private switc boards in t e UK.

Handset display

Displays the status

of your handset.

Talk button

For making,

answering and

ending calls.

Directory button

10 numbers can be

stored, dialled and

edited in the

directory.

Recall button

For use with

switchboards and

some network

services.

Also, use to enter a

pause in a stored

number.

Redial button

Press to redial the

last number called.

Keypad

Keyguard button

Hold down to lock

and unlock the

keypad.

Set button

Press to conﬁrm

settings.

At a glance

Handset

Base

Telephone

line socket

Mains power

socket

Charging

contact points

Handset display icons

Handset is in use

W en steady s ows t e base is registered

to t e andset. W en ﬂas ing s ows t at

t e base is not registered.

Conﬁrms setting as been saved.

✱

Recall

Pause

Directory empty

Keypad locked

Handset ready for registration

Handset searc ing for base

Handset found base t at’s ready

for registration

Helpline

If you experience any difﬁculties with your BT Diverse

5000 Solo, please call the BT Diverse Helpline on

0 457 90 070.

Introduction

Unpacking your BT Diverse 5000 Solo

If anything is missing, please contact your place of

purchase as soon as possible.

BT Diverse 5000 Solo base station

BT Diverse 5000 Solo andset

Mains power adaptor

Telep one line cord

Rec argeable battery pack

Battery compartment cover

For your records

Date of purc ase:

Place of purc ase:

For guarantee purposes proof of purchase is required so

please keep your receipt.

Safety information

General

Only use the power adaptor supplied with this product.

Using an unauthorised power adaptor will invalidate your

guarantee and may damage the phone. The power adaptor

code is C392 0 –Z4 –C47 .

For the handset use only approved Nickel Cadmium

(NiCad) rechargeable battery pack. Never use other battery

packs or conventional alkaline batteries. They could lead to

a short circuit or destroy the battery casing. Recommended

batteries should have a power rating of at least 300mAh

1.2V. Batteries are available from:

www.withandwithoutwires.com or call 0 70 240 5522.

If the keyguard is switched on, it is not possible to make

calls, including emergency numbers (999/112).

Do not open the base station or handset (other than to

change the battery pack). This could expose you to high

voltages or other risks.

Radio signals transmitted between the handset and base

may cause interference to hearing aids.

This product should not be used near emergency/intensive

care medical equipment and we recommend that it is not

used by people with pacemakers ﬁtted.

Never dispose of batteries in a ﬁre. There is a serious risk

of explosion and/or the release of highly toxic chemicals.

Cleaning

Simply clean the handset and base station with a damp

(not wet) cloth, or an anti-static wipe. Never use household

polish as this will damage the product. Never use a dry

cloth as this may cause a static shock.

Environmental

Do not expose to direct sunlight.

The product may heat up when the batteries are being

recharged. This is normal. However, we recommend that

you do not place the product on antique/veneered wood

to avoid damage.

Do not stand your product on carpets or other surfaces

which generate ﬁbres, or place it in locations preventing

the free ﬂow of air over its surfaces.

Do not submerge any part of your product in water and do

not use it in damp or humid conditions, such as bathrooms.

Do not expose your product to ﬁre, explosive or other

hazardous conditions.

There is a slight chance that your phone could be damaged

by an electrical storm. We recommend that you unplug the

power and telephone line cord during an electrical storm.

Setting up

IMPORTANT

Please note that your handset is not registered to the base

station and the battery pack has not been charged.

You must follow steps 1 to 3 before you can use your

BT Diverse 5000 Solo to make and receive calls.

Plan the location

• Situate your product close enough to the telephone and

mains power sockets so that the cables will reach.

• Make sure it is at least 1 metre away from other

electrical products to avoid interference.

• Do not situate the product in the bathroom or other

humid areas.

1Connect the power adaptor

Plug the power adaptor cable into the power socket on the

underside of your base station.

(diagram)

2Plug the power adaptor into the wall socket and

switch the power on

WARNING

Do not connect the telephone line cord to the phone socket

until your handset is fully charged. This will prevent the

risk of the phone being answered before the battery is

charged. Answering the phone before the battery is fully

charged may prevent it from reaching its optimum capacity.

3Register and charge the handset

The handset display is protected by a plastic ﬁlm which can

be removed.

Insert the battery pack

Plug the battery connector into the socket inside the

battery compartment. The connector should click securely

into place.

Insert the battery pack into the battery compartment,

taking care not to trap the cable. Gently position the cable

round the guides provided.

Slide the battery compartment cover on. The cover should

click securely into place. (The battery cover can be found

in the packaging with the battery pack).

WARNING

Under no circumstances should non-rechargeable battery

packs be used. Only use the approved NiCad battery pack.

Using unapproved battery packs will invalidate your

guarantee and may damage the telephone.

IMPORTANT

Before registering the handset to the base make sure that

the base station is connected to the mains power, that the

wall socket is switched on and that the battery pack is

inserted into the handset.

To register your handset, place it in the base station with the

display facing forwards. The registration display will appear

(this may take several minutes).

Whilst keeping the handset in the base station, unplug the

power adaptor from the wall socket. After a few seconds

plug the power adaptor back into the mains socket.

The found base confirmation screen, see below, will appear

in approximately 60 seconds.

A few seconds later the normal standby screen, see below,

will appear. This confirms registration is complete.

The symbol will

flash in the display.

Charge the handset

You will need to fully charge your handset before you can

use it for the ﬁrst time. Leave the handset in the base station

for approximately 16 hours to charge the battery pack.

Battery performance

Batteries and case may become warm during charging.

This is normal. Under ideal conditions, the handset

batteries should give about 10 hours talktime or 100

hours standby time on a single charge. However, new

NiCad batteries do not reach their full capacity until they

have been in normal use for several days.

The charge capacity of rechargeable batteries will reduce with

time as they wear out, so reducing the talk/standby time of

the handset. Eventually they will need to be replaced. New

batteries are available from www.withandwithoutwires.com

or call 0870 240 5522.

If you replace the handset batteries with ones that have

been fully charged, the battery indicator will not show full

until the next charge cycle has been completed. Charge the

handset until the batteries register full again. From then

on the display will be correct.

4Connect the telephone line cord to the base and

plug into the wall socket

Helpline

Your BT Diverse 5000 Solo is now ready for use.

However, if you experience any difﬁculties, please call

the BT Diverse Helpline on 0 457 90 070.

Andere Handbücher für DIVERSE 5000 SOLO

Inhaltsverzeichnis

Andere BT Schnurloses Telefon Handbücher

BT EDGE 2100 Bedienungsanleitung

BT HUB PHONE 1020 Bedienungsanleitung

BT GLIDE Bedienungsanleitung

BT STRATUS 1500 Bedienungsanleitung

BT 4010 Executive Bedienungsanleitung

BT DIVERSE 4010 CLASSIC Bedienungsanleitung

BT BT8600 Technisches Datenblatt

BT 3510 Technisches Datenblatt

BT FREESTYLE 7310 Bedienungsanleitung

BT Freestyle 710 Bedienungsanleitung

BT Synergy 2150 Bedienungsanleitung

BT Synergy 500 Twin Bedienungsanleitung

BT Freestyle 350 Bedienungsanleitung

BT Everyday Phone Technisches Datenblatt

BT DIVERSE 3010 MICRO Bedienungsanleitung

BT BT3110 Technisches Datenblatt

BT Studio Bedienungsanleitung

BT HUDSON 1500 Bedienungsanleitung

BT BT7660 Technisches Datenblatt

BT CALLER DISPLAY 1000 Bedienungsanleitung

BT FREESTYLE 2200 Bedienungsanleitung

BT Lyric 1100 Bedienungsanleitung

BT LYRIC 2500 Bedienungsanleitung

BT DIVERSE 6250 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung

Panasonic

Panasonic KX-TGP700 Bedienungsanleitung