BT DIVERSE REPEATER Bedienungsanleitung

BT Diverse Repeater

User Guide

Section

•Extends the range in which you can make and receive

calls from your existing DECT base station by up to

50m indoorsand 300m outdoors (in ideal conditions).

•Compatible with a range of BTDiverse and

BT Freestyle products.

•Confidence tone option keeps you informed that your handset is

in range of the Repeater.

Welcome…

to your BT Diverse Repeater

Range Extender

Section

This User Guide provides you with all the

information you need to get the most

from your BT product.

Beforefirstusing your BT Diverse

Repeater you will need to set it up and

the instructions in ‘Getting Started’, on

the nextfew pages.

Need help?

If you have any problems setting up or using

your BTDiverse Repeater please contact the

Helpline on Freephone 0808 100 7337*.

Alternatively,you may find the answer in ‘Help’

at the back of this guide.

Got everything?

•BT Diverse Repeater

•Mains power adaptor

•2 x screws and wall plugs

* Calls made from within the UK mainland network are free.

Mobile and International call costs may vary.

Introduction .........................5

Getting started ......................7

Using your BT Diverse Repeater

Operating a handset for the first time

within the extended Repeater area . . . . . .10

To turn the Repeater’s confidence

tone on and off . . . . . . . . . . . . . . . . . . . . . .11

To reset the Repeater . . . . . . . . . . . . . . . . . .12

Wall mounting the Repeater . . . . . . . . . . . .13

Help ...............................14

General information

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Environmental . . . . . . . . . . . . . . . . . . . . . . .16

Product disposal instructions . . . . . . . . . . .16

Technical information . . . . . . . . . . . . . . . . .17

Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . .18

In this guide

If you experience any problems, please call the Helpline on Freephone 0808 100 7337*

Introduction

Up to six Repeaters can be installed on a single base station

and each Repeater can support up to 2 handsets each. The

registration of Repeaters on the base station does not reduce

the number of handsets that can be registered to the base

station. A typical arrangement is shown below:

IMPORTANT

It is possible to roam between the

Repeater and the base, however, call

handover during conversation is not

always guaranteed.

IMPORTANT

It is not possible to further extend the

range in one direction by registering a

second Repeater to the first Repeater.

All Repeaters must be within range of

the base station as the Repeater can

only be registered to a base station

and not another Repeater.

AYou can operate two handsets in the

reception range of the repeater.

BIf you wish to operate more than

two handsets you must increase

the number of Repeaters for the

reception range.

6 Introduction

If you experience any problems, please call the Helpline on Freephone 0808 100 7337*

BT Diverse 6210

BT Diverse 6250

BT Diverse 6350

BT Diverse 6410

BT Diverse 6450

BT Freestyle 7250

BT Freestyle 7310

BT Diverse 5000

BT Diverse 5210

BTDiverse 5250

BT Diverse 5310

BTDiverse 5350

BT Diverse 5410

BTDiverse 5450

BT Diverse 4010

BT Diverse 4016

BT Diverse 3010

BT Diverse 3010 Micro

BTDiverse 3016

BTDiverse 2010

BT Diverse 2011

BT Diverse 2015

BT Diverse 2016

BTDiverse 2020

BTDiverse 2-Line

BT Diverse ISDN

The BT Diverse Repeater is compatible

with the following products:

Getting started

Left LED

OFF Power supply off

ON Normal link to base station

Flashing No link to base station

Intermittent Ready to register

flashing

Right LED

OFF No calls

Flashing once One handset using Repeater

Flashing twice Two handsets using Repeater

Front

If you experience any problems, please call the Helpline on Freephone 0808 100 7337*

Connect the mains power adaptor

Plug the small end of the power adaptor cable into

the socket on the back of the Repeater.

Then plug the other end intothe mains wall socket.

Use a power socket close to your base station. This is because

during the registration process the base station needs to be

near the Repeater. You can relocate your Repeater after

registration is complete.

Getting started

Mains power adaptor cable

Switch off the mains power at the wall socket

This is for the registration procedure. Before beginning

registration, all unregistered Repeaters should be

switched off.

1. Turn on the Repeater mode in the product that you will be

registering the Repeater to. This varies dependant on the

product, the instruction can be found in the relevant

userguide, provided with the product.

2. Put the product into registration mode, this is normally done

by pressing and holding the Find button, or by pressing the

Registration button, as appropriate.

3. Switch on the power to the Repeater at the wall socket.

The green lefthand LED on the Repeater will flash, then

after a short while the LED will remain on, indicating that

the registration is complete.

Getting started 9

If you experience any problems, please call the Helpline on Freephone 0808 100 7337*

10 Section

If you experience any problems, please call the Helpline on Freephone 0808 100 7337*

Using your BT Diverse Repeater

Once registered, the Repeater can be positioned anywhere

within the reception range of the base station, preferably

towards the direction you wish to extend the range.

1. Locate a suitable position near a mains socket within the

reception area of the base station and towards the direction

you wish to extend the range.

2. Plug the power adaptor into the mains socket (and into the

Repeater if it has been disconnected) and switch on the mains

power at the wall socket.

The green left-hand LED will begin to flash as it connects to

the base station, then stops flashing and remains lit once a

link has been made. If the LED continues toflash, switch the

power off and on again. If flashing continues, see the ‘Help’

section on page 14.

Operating a handset for the first time within the extended

Repeater area

Makesurethat handset(s) you want have been registered to

the same base station as the Repeater.

1. Switch off the handset within the new reception range of the

Repeater but outside the reception range of the base, and

then switch it back on again.

2. To confirm the handset is working with the Repeater, press the

TALK button on the handset whilst next to the Repeater.

Please note

If using more than one Repeater on a

base station you should ensurethe

Repeaters are placed at least 10

metres apart.

If extending the range to outdoors it

may be better to locate the Repeater

near a window and higher on the

wall, as radio signals do not work as

well through thick walls.

Please note

Blind spots (where signal is weak) can

cause loss of signal. Avoiding blind

spots will reduce the risk of losing a

call.

Andere Handbücher für DIVERSE REPEATER

Inhaltsverzeichnis

Andere BT Extender Handbücher

BT 500 Kit Bedienungsanleitung

BT Flex 500 Bedienungsanleitung

BT Broadband Extender 200 Bedienungsanleitung

BT Flex 1000 Bedienungsanleitung

BT Flex 500 Kit Bedienungsanleitung

BT Flex 600 Kit Bedienungsanleitung

BT PaperJet 300 Bedienungsanleitung

BT Broadband Extender Flex 500 Kit Bedienungsanleitung

BT Multiport Broadband Extender 500 Bedienungsanleitung

BT Converse 1200 Bedienungsanleitung

BT Dual-Band Wi-Fi Extender 600 Bedienungsanleitung

BT RELATE 600 Bedienungsanleitung

BT Essentials Wi-Fi Extender 300 Bedienungsanleitung

BT Wi-Fi Extender 610 Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung