BT Huawei E180 Bedienungsanleitung

BT Mobile Broadband

E180 HSPA USB Stick

Quick Start Guide

Welcome to your new E180 HSPA USB Stick

Thank you for choosing BT. This box includes your E180 HSPA USB Stick

which will give you access to the Internet via our high speed HSPA, 3G

and GPRS mobile networks. Whether you are in a café, on the train or in

an airport, the E180 allows you to stay connected and collaborate with

customers and colleagues from wherever you are.

This guide will take you through the simple process of how to set up your

new device so you can get started straight away.

Contents

What’s in your pack 4

First things rst 5

Windows® or Mac® system requirements 7

Insert your E180 8

What is BT Access Manager? 10

Connect to the Internet with BT Access Manager 11

Removing the E180 12

Removing BT Access Manager 12

Safety information 13

Acronyms and Abbreviations 17

Your pack should include these items:

What’s in your pack

The E180 Quick Start guide USB cable

1 Insert the BT SIM card into your E180, as shown below:

First things rst

i. Turn the USB Modem

face down and slide off

the cover in the

direction shown.

ii. With the notch in the SIM

card at bottom right, and

the BT logo upwards,

slide the SIM card into

the slot.

iii. Slide the cover

back on.

2 Before you plug in your E180, here are a few things about your E180 that you

might want to know rst before you use it.

You can rotate the USB connector out of the top of the USB Modem.

Indicator is… this means…

Solid Green the E180 is connected to a GPRS (GSM/GPRS/EDGE) network

Solid Blue the E180 is connected to a UMTS (3G) network

Solid Cyan the E180 is connected to a HSPA (HSDPA/HSUPA) network

Off the E180 is removed and not connected

Intermittent blinking means the device is registered to but not connected to the relevant

network (connect using BT Access Manager).

Rapid Green blinking means the E180 is on but not registered/connected (eg. no network

coverage available).

Status indicator

To use the E180, your computer must meet the following requirements:

Connectivity Spare USB port, compatible with USB 2.0 Full Speed

CPU 133 MHz or above, 500 MHz or above is recommended

Memory 256 MB RAM or more

Hard disk 50 MB or more free space

Operating system Microsoft® Windows 2000/XP/Vista (32 bit)

or Mac OS 10.3.5 or above

Display Resolution of 800×600 or above, 1024×768 is recommended

Windows® or Mac® system requirements

You will need to have your laptop switched on before you plug the E180 in.

This will ensure the BT Access Manager software installs correctly the rst time.

1 Plug the E180 into the USB interface of your laptop.

Insert your E180

If necessary, use the enclosed USB cable

to connect in conned spaces.

2 Windows® XP users: a setup wizard will start when you plug in the E180 (this

may take up to 2 minutes). Click “Next>” to install BT Access Manager and follow

the on-screen prompts.

Windows® Vista users: a setup wizard will start when you plug in the E180

(this may take up to 2 minutes). Select “Run Autorun.exe” to install BT Access

Manager. At User Account Control select “Allow – I trust this program” and then

follow the on-screen steps.

Mac® users: a new window will open, double-click the BT Access Manager icon

to launch the setup wizard and follow the on-screen steps.

3 Follow the prompts for the BT Access Manager installation:

4 Windows® users: after the program is installed, a shortcut icon for BT Access

Manager will be displayed on your desktop.

Mac® users: inserting the E180 will display a BT Access Manager CD icon.

Launch BT Access Manager by double-clicking the BT Access Manager icon in

the new window that will appear. You can create a desktop shortcut if you wish,

in which case the BT Access Manager icon will appear on your desktop.

We recommend that you remove the E180 before shutting your laptop down.

If you choose to leave the E180 inserted and shut down the laptop, see overleaf

for instructions on starting the program when you next power up.

What is BT Access Manager?

BT Access Manager is a piece of software that you need to install to use

your E180. It will search for the best available networks in your area and

allow you to connect to the Internet. To nd out more about BT Access

Manager and for a full user guide including FAQs and Troubleshooting,

please visit www.bt.com/accessmanager.

Andere Handbücher für Huawei E180

Inhaltsverzeichnis

Andere BT Modem Handbücher

BT ZTE MF823 Bedienungsanleitung

BT Home Hub 4 Bedienungsanleitung

BT Voyager 210 Bedienungsanleitung

BT Mini Wi-Fi Home Hotspot 600 Kit Bedienungsanleitung

BT Mini Wi-Fi Home Hotspot 500 Bedienungsanleitung

BT CEL-2IN Bedienungsanleitung

BT Mini Wi-Fi Home Hotspot 600 Multi Kit Bedienungsanleitung

BT Mini Wi-Fi Home Hotspot 500 Multi Kit Bedienungsanleitung

BT Huawei E180 Bedienungsanleitung

BT ZTE MF667 Bedienungsanleitung

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung

Zoom

Zoom 1070 Series Bedienungsanleitung