Bticino MyHOME H4660M2 Bedienungsanleitung

1/2

456

1. USE

Two module flush mounted lowered control with 3 pushbuttons and 3

bicolour LEDs, green + red in the LIVING and MàTIX version, or blue +

red in the AXOLUTE version. Designed to be used ONLY with advanced

actuators (flush mounted, or DIN module) specifically intended for the

management of shutters.

Preset function:

In addition to the Monostable and Bistable UP/DOWN operating modes,

by pressing the STOP pushbutton the control gives the possibility of

moving the shutter to a specific position (Preset) saved by the actuator. It

is also possible to set a different position as required by the user.

The function can only be set with the configuration of “control-actuator”

addresses of the Point-Point type, or with Room, Group, and General

controls, after configuring the reference actuator (position Ar and PLr).

For more details see the Configuration chapter in the following page.

2. RELATED ITEMS

Actuator item F401, H/LN4661M2 and AM5861M2

3. TECHNICAL DATA

Power supply from BUS: 27 Vdc

Operating power supply with SCS BUS: 18 – 27 Vdc

Stand by absorption: 7 mA max

Operating temperature: 0 – 40 °C

4. STANDARDS, CERTIFICATIONS, MARKS

• EN50090-2-2: Home and building electronic systems (HBES);

• EN50090-2-3: General functional safety requirements for products

intended to be integrated in HBES;

• EN50428: Switches and related accessories for use in home and

building electronic systems (HBES).

5. DIMENSIONAL DATA

Size: 2 flush mounted modules

6. LEGEND

1. UP LED: orange (green + red) or purple (red + blue), when the shutter

is moving upwards. Green or blue, when the shutter is still, or moving

downwards;

2. UP shutter pushbutton;

3. DOWN shutter pushbuttoN;

4. DOWN LED : orange (green + red) or purple (red + blue), when the

shutter is moving downwards. Green or blue, when the shutter is still,

or moving upwards;

5. Push&Learn configuration pushbutton and brightness adjustment

LED (see page 2);

6. Preset LED: ON orange (green + red) or purple (red + blue), when the

shutter is moving to the saved position (Preset). Flashing during the

virtual configuration;

7. STOP Pushbutton: Press when the shutter is still, to move it to the

Preset position. Press when the shutter is moving, to stop it at the

current position.

8. Configurator socket (to be used only in MY HOME systems with

physical configuration)

9. BUS cable clamp.

Front view

Rear view

Shutter management control

BT00591-a- 18/06/2012

H4660M2

LN4660M2

AM5860M2

2/2

DEFAULT

100%

30%

60%

PUSH t > 2 s

7. CONFIGURATION

When installed in a MY HOME system, the device may be configured in

two ways:

•PHYSICAL CONFIGURATION, by connecting the physical configurators

to their sockets.

•VIRTUAL CONFIGURATION, by connecting the system to the PC using

the Kit item 3504 or the Web server. The Virtual configurator software

must be installed on the PC.

PHYSICAL CONFIGURATION

A = room

PL = light point

M = operating mode (see following table)

Mode Value configurator in M

UP/DOWN rolling shutter bistable none or 

UP/DOWN rolling shutter monostable M

UP/DOWN rolling shutter monostable.

Bistable if the pressure time exceeds

1.5 s.

UP/DOWN rolling shutter bistable.

Blades adjustment if the pressure time

is more than 1.5 s.

Pre = connect one of the configurators from 1 to 9 to select one of the

9 Preset positions saved in the actuator, as shown in the following

table. If no configurator is connected, the “Preset” position is

disabled.

Correspondence between the value of the configurator in the Pre

position and the opening position of the shutter

Configurator Opening

9 90 %

8 80 %

7 70 %

6 60 %

5 50 %

4 40 %

3 30 %

2 20 %

1 10 %

Ar and PLr = configure these two position only in case of management

of several actuators with General, Room, or Group type

control.The Ar and PLr positions correspond to the address

of the reference actuator for control status update.

Saving the rolling shutter position (Preset)

Irrespective of the device configuration mode use, it is possible to change

the Preset position based on the needs of the user. The procedure is as

follows:

1. Use the control device, or the flush mounted actuator, to move the

shutter to the desired position.

2. Press the STOP pushbutton for at least 10 seconds. The actuator

associated to the control saves the position of the shutter.

3. To confirm that the position has been saved correctly, the two LEDs,

UP and DOWN, come on orange (green + red) or purple (red + blue) for

2 seconds.

Irrespective of the shutter position, once this has been stopped by

pressing the STOP pushbutton, it will be possible to move it to the preset

position.

LED ADjUSTMENT

1. Press the Configuration pushbutton for at least 2 seconds.

2. Hold down the pushbutton; the brightness of the LED will change

every 2 seconds as shown in the drawing;

3. Once the desired brightness level has been reached, release the

pushbutton.

Shutter management control

BT00591-a- 18/06/2012

H4660M2

LN4660M2

AM5860M2

Dieses Handbuch passt für folgende Modelle

Andere Bticino Controller Handbücher

Bticino

Bticino BTK4003CW Bedienungsanleitung

Bticino

Bticino 346230 Bedienungsanleitung

Bticino

Bticino H4574 Bedienungsanleitung

Bticino

Bticino FC80AC Bedienungsanleitung

Bticino

Bticino K4027CW Bedienungsanleitung

Bticino

Bticino L4027C Bedienungsanleitung

Bticino

Bticino F20T60A Bedienungsanleitung

Bticino

Bticino JB4003CWI Bedienungsanleitung

Bticino

Bticino K4003DCW Bedienungsanleitung

Bticino

Bticino KW8013 Bedienungsanleitung

Bticino

Bticino K8002S Bedienungsanleitung

Bticino

Bticino K8002L Bedienungsanleitung

Bticino

Bticino AXOLUTE HD4657M3 Bedienungsanleitung

Bticino

Bticino 3470 Bedienungsanleitung

Bticino

Bticino AM4027C Bedienungsanleitung

Bticino

Bticino LN4027CWI Bedienungsanleitung

Bticino

Bticino K4500C Bedienungsanleitung

Bticino

Bticino F470/1 Bedienungsanleitung

Bticino

Bticino L4003C Bedienungsanleitung

Bticino

Bticino K4574CW Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch