Buhler SnackFix Bedienungsanleitung
Operator Manual
Electronics
SnackFixTM
Version: 2018-05-V1.8-EN
Please read these instructions before
beginning any work!
Table of Contents
SnackFixTM 2018-05 V1.8 2
Table of Contents
1 Safety...................................................................................................................... 4
1.1 Intended usage...................................................................................................... 4
1.2 Inadmissible usage................................................................................................ 4
1.3 WARNING............................................................................................................. 4
1.4 Safety during operation ......................................................................................... 5
1.5 Securing and switching off the plant during maintenance and repair ..................... 6
2 Electronics ............................................................................................................. 7
2.1 Layout data ........................................................................................................... 7
2.2 Perimeter............................................................................................................... 7
2.3 Start-up ................................................................................................................. 7
3 Visualisation screen and operation ..................................................................... 8
3.1 Visualisation functions and operating elements on the operator panel................... 9
4 Mass Preparation Unit MPU................................................................................ 10
4.1 Function of keys on screen „Start screen Mass Preparation Unit MPU“:...............11
4.2 Screen Contimix & Dosing Pump..........................................................................12
4.3 Function of keys on screen „Contimix & Dosing Pump“:.......................................13
4.4 Service“ Mass Preparation Unit MPU“..................................................................15
4.5 Functions of keys on screen „Service“:.................................................................16
4.6 Screen limits MPU:...............................................................................................18
5 Cutting Unit CU and EGW................................................................................... 19
5.1 Function of keys on screen „Start screen Cutting Unit CU“:..................................20
5.2 Screen Cutter.......................................................................................................21
5.3 Function of keys on screen „Cutter“:.....................................................................22
5.4 Screen EGW Roller..............................................................................................24
5.5 Function of keys on screen „EGW 1 & 2 Roller“:...................................................25
5.6 Login....................................................................................................................26
5.7 Service“ Cutting Unit“ ...........................................................................................27
5.8 Functions of keys on screen „Service Cutting Unit CU“: .......................................28
5.9 Screen limits Cutting Unit CU:..............................................................................31
5.10 Screen limits EGW 1 & 2:.....................................................................................32
6 Alarms .................................................................................................................. 33
6.1 Functions of keys on screen „Alarm screen“:........................................................34
6.2 Function „Alarm screen“:......................................................................................34
Table of Contents
SnackFixTM 2018-05 V1.8 3
7 Screen Recipe...................................................................................................... 35
7.1 Functions of keys on screen „Recipe screen“:......................................................36
7.2 Function „Recipe screen“:.....................................................................................37
8 Production Start / Stop........................................................................................ 38
8.1 Readiness for operation .......................................................................................38
8.2 Switching machine on...........................................................................................38
8.3 Select the Operating Mode MS.............................................................................39
8.4 Switch on the complete Machine..........................................................................40
8.5 Switch on individually ...........................................................................................40
8.6 Switching machine off...........................................................................................41
8.7 Switch off individually ...........................................................................................41
Safety
SnackFixTM 2018-05 V1.8 4
1 Safety
1.1 Intended usage
The plant is exclusively intended for the usage described. Another usage or any
usage going beyond the described usage is not permitted and therefore not ac-
cording to the intended usage.
The intended usage also includes the adherence to the operating instructions.
1.2 Inadmissible usage
The unauthorized extension and modification of the plant.
The inexpert use of devices, accessories etc.
The operation with safety equipment which is not in unobjectionable condition
resp. which is bridged or out of action.
The operation with voltages which do not coincide with the indications on the
type plate.
1.3 WARNING
Before operation, cleaning or maintenance work, the corresponding protective
measurements according to the manufacturer's instructions have to be ob-
served. Product residues have to be removed at the end of the operation.
Safety
SnackFixTM 2018-05 V1.8 5
1.4 Safety during operation
Before starting the plant it has be ensured that no danger can occur to persons
and that no material goods can be damaged.
Refrain from any working method questionable to safety.
During installation, operation, maintenance and repair observe the directions of
the corresponding operating instructions.
Do not work at the plant or do not operate it, if, for whatever reason (e.g. the in-
fluence of medication), your power of concentration is impaired.
Observe the regulations for the prevention of accidents (RPA).
Inform the responsible supervisor about all dangers or faults.
Determine a clear working space allocation when several people are working on
the plant.
Determine a responsible person for the coordination of the work and ob-
servance of the safety regulations.
The enclosed operating instructions are no replacement for an introduction to
the operation and maintenance of the plant and its components.
Without training from qualified persons the plant may not be started up.
Safety
SnackFixTM 2018-05 V1.8 6
1.5 Securing and switching off the plant during maintenance and repair
Switch off the plant at the main switch before beginning maintenance or repair
work.
Secure the main switch with a lock against unauthorized switching on again.
Keep the key in a safe place. Act very carefully, if you do not switch off the plant
at the main switch due to necessary work (e.g. function control).
Call in a second person, who operates the main switch in the case of emergen-
cy, e.g. if work has to be carried out on live parts.
If the protective and safety equipment for the above mentioned work had to be
removed, they always have to be installed again afterwards and checked that
they function properly. This is particularly important for:
-Covers
-Safety instructions
-Warning signs
-Grounding cables
Watch and supervise the plant. If the plant shows any faulty behaviour after
switching on, it has to be switched off again immediately.
Electronics
SnackFixTM 2018-05 V1.8 7
2 Electronics
The electrical system has been installed to supplied the wiring diagram.
The Operator can see all the relevant process data on the operating panel.
2.1 Layout data
Protection type motor: IP 54 / IP 56
Connection: 380V – 480 V three phase current, 50 cy / 60 cy
Speed regulation: frequency converter/Siemens G120C
Overload protection: Thermo contact
2.2 Perimeter
Memory programmable control, freely programmable for process control and
observation of the machine, type Siemens CPU 1215C.
Drive control via frequency converter Siemens G120C.
Electric cabinet in stainless steel with built in main switch in the cabinet door.
The machine is operated via an Operator Panel, built in with a separate housing
on an arm. An emergency STOP and a RESET are additionally on the operator
panel. The operator panel KTP400 Basic is equipped with the visualisation
software TIA Portal. This is used for the operation and the visualisation of the
machine.
Complete wiring between the machine, control cabinet and operator panel.
Hardware documentation.
2.3 Start-up
Before the test run of the machine, which is carried out without product, it has to
be checked that the working areas of the machine are free from tramp parts.
Visualisation screen and operation
SnackFixTM 2018-05 V1.8 8
3 Visualisation screen and operation
Input field
Operating field
Mach
ON Mach
OFF Start
Screen
Touch button
Visualisation screen and operation
SnackFixTM 2018-05 V1.8 9
3.1 Visualisation functions and operating elements on the operator panel
Indicator field: This shows the machine status and the set parameters.
Selection window: This field allow the changing between the modes of the
machine part.
Operating field: These fields control the operating units (electric and
pneumatic drives). The operating fields are actuated via
the touch field.
Input field: These fields allow the numerical entry of process pa-
rameter and nominal values. The Input fields are actuat-
ed via the touch field.
Screen change: By pressing the corresponding function touch field the
screens can be changed.
Emergency stop Reset: Button Acknowledgement after pressing
Emergency Stop
Emergency stop button: Emergency Stop of the machine
Mass Preparation Unit MPU
SnackFixTM 2018-05 V1.8 10
4 Mass Preparation Unit MPU
Start Screen
Mach
ON Mach
OFF
Andere Handbücher für SnackFix
1
Inhaltsverzeichnis
Andere Buhler Industrieanlagen Handbücher
Buhler
Buhler SDW 800/1000 Bedienungsanleitung
Buhler
Buhler GAS 222.17 Referenzhandbuch
Buhler
Buhler DFTA 12 Bedienungsanleitung
Buhler
Buhler GAS 222.10 Betriebsanleitung
Buhler
Buhler GAS 222.21 Ex1 Referenzhandbuch
Buhler
Buhler GAS 222.17 Betriebsanleitung
Buhler
Buhler GAS 222.20 DH Betriebsanleitung
Buhler
Buhler TS 10 Referenzhandbuch
Buhler
Buhler GAS 222.21 Betriebsanleitung
Buhler
Buhler RC 1.1 Bedienungsanleitung
