Bull 30008 Kurzanleitung
ASSEMBLY & OPERATING INSTRUCTIONS
MODEL #30008 SLIDE-IN DOUBLE SIDEBURNER STAINLESS STEEL, BUILT-IN, L.P. (PROPANE)
MODEL #30009 SLIDE-IN DOUBLE SIDEBURNER STAINLESS STEEL, BUILT-IN, N.G. (NATURAL GAS)
TABLE OF CONTENTS PAGE #
SAFETY INSTRUCTIONS……………………...…………………………………………………….………………………..………………………...2
THE LOCATION FOR YOUR SLIDE-IN DOUBLE SIDEBURNER……..…….….……………………….....……….…………………........2
CHECKING FOR GAS LEAKS………………………………………………………………………………………...…..……………………..2
NATURAL GAS SAFETY…………………………………….……………………….……..………………….……………….…..…….……...3
PROPANE GAS SAFETY…………………………………………………………………………………………………….….………………..4
INSTALLATION INSTRUCTIONS…………………………………………………………………………………………..………………….…….....5
SPECIFICATIONS FOR SLIDE-IN DOUBLE SIDEBURNER STRUCTURE..…..…….……………………...………..……………………5
CONNECTING TO GAS SOURCE…………………………………………………..………………...…………………………………….......5
NATURAL GAS CONNECTIONS……………………………………………..….………….….….….……….…….……………………….….5
PROPANE GAS CONNECTIONS………………………………………...….……..…..….…….………….…….…...…….…….…….….......5
OUTDOOR NATURAL GAS SLIDE-IN DOUBLESIDEBURNER INSTALLATION SPECIFICATIONS….….…….………………..……6
OUTDOOR PROPANE GASSLIDE-IN DOUBLE SIDEBURNER INSTALLATION SPECIFICATIONS………………….……...……….7
INSPECTING / CLEANING BURNERS AND GAS VALVES…………….…….…..…..……..…….………………..………..………...….…….…8
BURNER CLEANING.................................................................................................................................................................................8
BURNER REPLACEMENT INTO INSERT……………….…….….…….…….…….…….….…………..…...…..…...…..….….…....………9
IGNITER CHECK……………………………………………………………………………………….…….……..….………….………...…….9
BURNER OPERATION CHECK………………………….………………….….….….….….….….….…..…..…..…….……….…….….……9
COOKING COMPONENT………………………………………………………………………….….…...……….……….….….…………….10
LIGHTING & OPERATING INSTRUCTIONS……………………….….…….………………...…….....….………………....…...…………..……..11
LIGHTING PROCEDURES……………………………………………………….……………..…...….….…..…......…......….…............…...11
OPERATING PROCEDURE…………………………………………………….…………..….….……………………….…….…..…...….….11
CLEANING & MAINTENANCE…………………………………………………………………………………………..……………..………………12
TROUBLESHOOTING………………………………...........................................................................................................................................13
IF SLIDE-IN DOUBLE SIDEBURNER FAILS TO OPERATE PROPERLY………..................................................................................13
FLASH BACK............................................................................................................................................................................................13
PARTS LIST………………………………………………………………………………………………………………………………......................14
EXPLODED ILLUSTRATION………………………………………………………………………….……….…….…………….….….……………15
LIMITED WARRANTY…………………………………….………….…….……….……………….…………….………...….…..…..…...…………16
- READ THE FOLLOWING INSTRUCTIONS CAREFULLY AND BE SURE YOUR SLIDE-IN DOUBLE SIDEBURNER IS PROPERLY
INSTALLED, ASSEMBLED AND CARED FOR. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN SERIOUS BODILY INJURY
AND/OR PROPERTY DAMAGE. IF YOU HAVE QUESTIONS CONCERNING ASSEMBLY OR OPERATION, CONSULT YOUR DEALER, GAS
APPLIANCE SERVICE REPRESENTATIVE ORYOUR GAS COMPANY.
- NOTE TO INSTALLER:
LEAVE THESE INSTRUCTIONS WITH THE CONSUMER AFTER INSTALLATION.
- NOTE TO THE CONSUMER:
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
- THIS OUTDOOR COOKING GAS APPLIANCE IS NOT INTENDED TO BE INSTALLED IN OR ON RECREATIONAL VEHICLES AND/OR
BOATS.
*FOR WARRANTY PURPOSES, PLEASE RECORD YOUR MODEL NUMBER, SERIAL NUMBER, DATE OF PURCHASE & A COPY OF YOUR
RECEIPT OR INVOICEIN THE BACK OF YOUR MANUAL ON PAGE 16.
1
SAFETY INSTRUCTIONS
This slide-in double sideburner must be installed in accordance with local codes or, if in an area without local codes, with the latest edition of the
National Fuel Gas Code ANSI Z223.1. In Canada, installation must conform to the standard CAN/ CGA 1-b149.1 and/or .2 (Installation Code for
Gas Burning Appliances and Equipment) and any local codes.
WARNING: Fuels used in gas or oil-fired appliances and the products of combustion of such fuels, contain chemicals known to the State of
California to cause cancer, birth defects and/or reproductive harm. This warning is issued pursuant to California Health & Safety Code Sec.
25249.6.
THE LOCATION FOR YOUR SLIDE-IN DOUBLE SIDEBURNER
DO NOT use your slide-in double sideburner in garages, porches, breezeways, sheds or other enclosed areas. Your double sideburner is to
be used OUTDOORS ONLY, with at least 21 inches clearance from the back and side of any combustible surface. The double sideburner should
not be placed under or on top of any surface that will burn. Do not obstruct the flow of combustion and ventilation air around the insert.
PROTECT CHILDREN: Keep children away from the double sideburner during use and until it has cooled after you are finished. Do not allow
children to operate the double sideburner.
CHECKING FOR GAS LEAKS
NEVER TEST FOR GAS LEAKS WHILE THE SLIDE-IN DOUBLE SIDEBURNER IS LIT! Prior to the first use and at the beginning of each new
season (or, if using LP,whenever gas cylinder is changed), it is a must that youcheck for gas leaks. Follow these steps:
1. Make a soap solution by mixing one part liquid detergent and one part water.
2. Turn off heat control valves, and then turn on gas at source.
3. Apply the soap solution to all gas connections: bubbles will appear in the soap solution if connections are not properly sealed. Tighten or repair
as necessary.
4. If you have a gas leak that you cannot repair, turn off the gas at the source, disconnect fuel line from the double sideburner and immediately call
your dealer and gas supplier for professional assistance.
2
FOR YOUR SAFETY...
DO NOT store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
DO NOT store empty or full spare gas cylinders and/or chemicals under or near this or any other appliance.
Keep the fuel hose away from hot surfaces. Protect the fuel hose from dripping grease. Avoid unnecessary twisting of the hose.
Visuallyinspect the hose prior to each use for cuts, cracks excessive wear or other damage and replace if necessary.
NEVER test for gas leaks with a lighted match or open flame.
NEVER light double sideburner with lid on or before checking to ensure burner tube is fully seated over gas valve orifice.
NEVER lean over cooking surface while lighting the double sideburner. Use barbecue tools with wood handles and good quality
insulated oven mitts when operating double sideburner.
IF YOU SMELL GAS...
1. Shutoff gas to the appliance at its source.
2. Extinguish any open flame.
3. Remove double sideburner lid to release any accumulation of fumes.
4. If gas odor persists, immediately contact your gas supplier.
READ CAREFULLY BEFORE ASSEMBLY AND OPERATION OF YOUR SLIDE-IN DOUBLE SIDEBURNER
SAFETY INSTRUCTIONS (CONT.)
NATURAL GAS SAFETY
Your natural gas slide-in double sideburner is designed to operate on natural gas ONLY, at a pressure of 4” water column (W.C.) regulated at the
natural gas regulator that is included with the double sideburner and natural gas orifices located on the ventri tubes. Check with your gas utility for
local gas pressure and with your local municipality for building code requirements.
Check with your gas utility or with local building codes for instructions to install gas supply line, or call a licensed and knowledgeable installer.
It is recommended that an “ON-OFF” shutoff valve be installed at the gas supply source:
- Outdoors after gas line piping exits outside wall and before quick-disconnect or before gas line piping enters ground.
- Indoors in the branch fuel line in an accessible location near the supply line.
Pipe sealing compound or pipe thread tape of the type resistant to the action of natural gas must be used on all male pipe thread. Apply
compound or tape to at least the first three threads when making the connection.
Disconnect your double sideburner from the fuel source when the gas supply is being tested at high pressures. This appliance and its individual
shutoff valve must be disconnected from the gas supply piping system during any pressure testing of that system at pressures in excess of 1/2
psig (3.5 kPa).
Turn off your double sideburner when the gas supply is being tested at low pressures. This appliance must be isolated from the gas supply piping
system by closing its individual valve.
WARNING: The gas valves are preset at the factory to operate on LP or natural gas. If you wish to convert to a different gas type, be sure to
contact your slide-in double sideburner dealer,licensed plumber or authorizedservice center for further details. Conversion kits are not sold to the
general public and require a professional to perform service. Failure to properly convert a unit can cause serious injury to yourself and/or others,
irreparable damage to your double sideburner and void of warranty.
3
SAFETY! BEWARE OF SPIDERS
CAUTION: BURNERS MUST BE INSPECTED AND CLEANED BEFORE FIRST USE.
Spiders andsmall insects occasionally spin webs or make nests inthe burners during warehousing, transitand/or after long periods of non-use.
These webs can lead to a gas flow obstruction, which could result in a fire in and around the burner tubes. This type of fire is known as “FLASH-
BACK” and can cause serious damage to your double sideburner and create an unsafe operating condition for the user. Although an obstructed
burner tube is not the only cause of “FLASH BACK” it is the most common cause, and frequent inspection and cleaning of the burners is
necessary.
SAFETY INSTRUCTIONS (CONT.)
PROPANE GAS SAFETY
Your propane slide-in double sideburner is designed to operate on propane gas ONLY, at a pressure of 11” water column (W.C.) when equipped
with a propane regulator on the supply line regulated at the residential meter and propane orifices located on the ventri tubes.
Your propane double sideburner is designed to be used with a standard 20 lb gas cylinder and must be constructed and marked in accordance
with specifications of the US Department of Transportation for Propane Gas Cylinders.
Always keep cylinder securely fastened in an upright position.
Never connect an unregulated propane gas cylinder to the double sideburner.
Do not subject propane cylinders to excessive heat.
CAUTION: Never store a propane gas cylinder inside a building or in the vicinity of any gas-burning appliance.
WARNING: The gas valves are preset at the factory to operate on LP or natural gas. If you wish to convert to a different gas type, be sure to
contact your slide-in double sideburner dealer,licensed plumber or authorizedservice center for further details. Conversion kits are not sold to the
general public and require a professional to perform service. Failure to properly convert a unit can cause serious injury to yourself and/or others,
irreparable damage to your double sideburner and void of warranty.
4
SAFETY! BEWARE OF SPIDERS
CAUTION: BURNERS MUST BE INSPECTED AND CLEANED BEFORE FIRST USE.
Spiders andsmall insects occasionally spin webs or make nests inthe burners during warehousing, transitand/or after long periods of non-use.
These webs can lead to a gas flow obstruction, which could result in a fire in and around the burner tubes. This type of fire is known as “FLASH-
BACK” and can cause serious damage to your double sideburner and create an unsafe operating condition for the user. Although an obstructed
burner tube is not the only cause of “FLASH BACK” it is the most common cause, and frequent inspection and cleaning of the burners is
necessary.
WARNING
•Do not store a spare or disconnected liquid propane cylinder under or near
this slide-in double sideburner.
•A dented or rusty liquid propane cylinder may be hazardous and should be
check by your liquid propane provider.
•Do not use a liquid propane cylinder with a damaged valve.
INSTALLATION INSTRUCTIONS
Your built-in slide-in double sideburner comes to you fully assembled. We strongly recommend professional installation and hookup of the double
sideburner. These instructions will provide youwith the measurements necessary for you or your builder to construct a masonry structure to house
your outdoor double sideburner.
NOTE TO INSTALLER: Leave these instructions with the consumer for future reference. The double sideburner must be installed in accordance
with all local building codes.
SPECIFICATIONS FOR SLIDE-IN DOUBLE SIDEBURNER STRUCTURE
1. Your choice of masonry can be used for cabinet construction for the built-in double sideburner; however it must be non-combustible material.
Keep in mind when choosing a location for your double sideburner that itshould NOT be located under any overhead combustible construction.
Upper and ground level vents must be provided for combustion air on both sides of built-in cabinet. The double sideburner insert must remain
unobstructed to allow for combustion air and ventilation.
2. The double sideburner requires a wall opening of the following dimensions: See PAGES 6 & 7 for different models.
3. Place double sideburner assembly into wall opening as shown in illustration on pages 6 & 7. The double sideburner rests on side and back
edges of the insert.
4. For propane gas LP TANK STORAGE AREA MUST BE ISOLATED FROM DOUBLE SIDEBURNER AND VENTED.
5. Do not use any combustible materials for this construction. Minimum horizontal clearance to adjacent combustible surface from side and back of
the double sideburner must be 21 inches. A 6 inch clearance is required behind double sideburner to allow for ventilation purposes.
CONNECTING TO GAS SOURCE
Refer to the following instructions and illustrations for typical gas supply connections. We strongly suggest professional installation and hook-up of
the double sideburner.
IMPORTANT: Before connecting double sideburner to gas source,
make sure the double sideburner control knobs are in the “OFF” position.
5
NATURAL GAS CONNECTIONS
- Pipe sealing compound or pipe thread tape of the type resistant to the
action of natural gas must be used on all male pipe thread.
- Apply compound or tape to at least the first three threads when making
the connection.
- Remove plastic cap from regulator.
- Attach stainless steel flex line 3/8” flare-female end to the regulator.
- Attached the other end of flex line to shut-off valve through a nipple.
- Attach a shut-off valve to gas supply pipe.
PERFORM GAS LEAK CHECK – REFER TO PAGE 2
PROPANE GAS CONNECTIONS
- The LP gas pressure regulator and hose assembly supplied with this unit must be used
without alteration. If this assembly needs to be replaced, use only the type 1 specified in
the parts list supplied with this unit. Use a LP tank with a type 1 cylinder valve.
- Make sure the tank is firmly secured in an upright position.
- Turn the black coupling nut of the hose and regulator assembly in a clockwise direction.
- Make sure it is completely threaded onto the cylinder valve before turning gas supply on.
PERFORM GAS LEAK CHECK – REFER TO PAGE 2
READ CAREFULLY BEFORE ASSEMBLY AND OPERATION OF YOUR SLIDE-IN DOUBLE SIDEBURNER
INSTALLATION INSTRUCTIONS (CONT.)
OUTDOOR NATURAL GAS SLIDE-IN DOUBLE SIDEBURNER INSTALLATION SPECIFICATIONS
NOTE:
- Vents must be provided for combustion air and ventilation on both sides of built-in cabinet.
- When choosing a location for your double sideburner keep in mind that it should never be located under any overhead combustible construction.
- The sides and back of the double sideburner should not be any closer than21 inches to combustible construction.
-DO NOT store empty or full spare tanks under or near this or any other appliance.
- There must be a minimum of 6” counter space behind the double sideburner in order to allow for ventilation purposes.
- A 1/2” hard pipe is required connecting to the double sideburner NG regulator.
6
INSTALLATION INSTRUCTIONS (CONT.)
OUTDOOR PROPANE GAS SLIDE-IN DOUBLE SIDEBURNER INSTALLATION
SPECIFICATIONS
NOTE:
- Vents must be provided for combustion air and ventilation on both sides of built-in cabinet.
- When choosing a location for your double sideburner keep in mind that it should never be located under any overhead combustible construction.
- The sides and back of the double sideburner should not be any closer than21 inches to combustible construction.
-DO NOT store empty or full spare tanks under or near this or any other appliance.
- There must be a minimum of 6” counter space behind the double sideburner in order to allow for ventilation purposes.
7
INSPECTING I CLEANING BURNERS AND GAS
VALVES
By following these cleaning procedures on a timely basis, your slide-in double sideburner will be kept clean and working properly with minimum
effort.
CAUTION – Always turn off the gas supply prior to clearing your double sideburner.
BURNER CLEANING
1. Remove burner from the double sideburner insert. Make sure to remove the ignition wires from the bottom before lifting up the burners (See
drawing below).
2. Using a narrow bottlebrush with a flexible handle, run it through the burner tube several times.
3. Inspect the burner assembly for any openings caused by corrosion.
4. Inspect the burner ports and clear any clogged ports with a stiff metal wire.
8
INSPECTING / CLEANING BURNERS AND GAS
VALVES (CONT.)
BURNER REPLACEMENT INTO INSERT
CAUTION – Always turn off the gas supply prior to clearing your double sideburner.
1. Replace burners back into the double sideburner insert.
2. Check the burners for proper location after replacing. Make sure the tubes on the bottom of the burners are inside of the ventri tubes (see
drawing below). If the burner tubes are not seated inside the ventri tubes, lighting the burners may cause explosion and/or fire.
IGNITER CHECK
With the control knobs set to “OFF”, check the first igniter for presence of spark at burner. Push control knob in fully and turn slowly about a 1/4
turn to the left (counter-clockwise) until a click is heard; the trigger hitting the strike block should produce a blue spark at the igniter tip. Return
control knob to “OFF”. Check the other igniter using the same procedure.
BURNER OPERATION CHECK
NOTE: Upon first assembly the gas lines and burners will be full of air. In order for the burners to light properly the lines must fill with gas. It may
require several attempts at lighting the burners before you are successful.
1. With the double sideburner control knobs in the “OFF” position, turn on the Gas supply.
9
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Bull Brenner Handbücher
