Bull ESCALA 03E/4A Bedienungsanleitung

Cabling your Server

ESCALA

REFERENCE

86 A1 00FB 00

ESCALA

Cabling your Server

Hardware

November 2008

BULL CEDOC

357 AVENUE PATTON

B.P.20845

49008 ANGERS CEDEX 01

FRANCE

REFERENCE

86 A1 00FB 00

The following copyright notice protects this book under Copyright laws which prohibit such actions as, but not limited

to, copying, distributing, modifying, and making derivative works.

Printed in France

Trademarks and Acknowledgements

We acknowledge the rights of the proprietors of the trademarks mentioned in this manual.

All brand names and software and hardware product names are subject to trademark and/or patent protection.

Quoting of brand and product names is for information purposes only and does not represent trademark misuse.

The information in this document is subject to change without notice. Bull will not be liable for errors

contained herein, or for incidental or consequential damages in connection with the use of this material.

Contents

Safety notices ................................ vii

Cabling your server...............................1

Cabling amodel 03E/4A and the Hardware Management Console .................1

Cabling amodel 03E/4A to access the Integrated Virtualization Manager ...............6

Cabling amodel 03E/4A to access the Advanced System Management Interface ............11

Cabling amodel 04E/8A and the Hardware Management Console .................16

Cabling amodel 04E/8A to access the Integrated Virtualization Manager...............20

Cabling amodel 04E/8A to access the Advanced System Management Interface ............24

Appendix. Notices ...............................31

Trademarks ...................................32

Electronic emission notices ..............................32

Class ANotices .................................32

Terms and conditions ................................35

vi Cabling your server

Safety notices

Safety notices may be printed throughout this guide.

vDANGER notices call attention to asituation that is potentially lethal or extremely hazardous to

people.

vCAUTION notices call attention to asituation that is potentially hazardous to people because of some

existing condition.

vAttention notices call attention to the possibility of damage to aprogram, device, system, or data.

World Trade safety information

Several countries require the safety information contained in product publications to be presented in their

national languages. If this requirement applies to your country, asafety information booklet is included

in the publications package shipped with the product. The booklet contains the safety information in

your national language with references to the U.S. English source. Before using aU.S. English publication

to install, operate, or service this product, you must first become familiar with the related safety

information in the booklet. You should also refer to the booklet any time you do not clearly understand

any safety information in the U.S. English publications.

Laser safety information

The servers can use I/O cards or features that are fiber-optic based and that utilize lasers or LEDs.

Laser compliance

All lasers are certified in the U.S. to conform to the requirements of DHHS 21 CFR Subchapter Jfor class

1laser products. Outside the U.S., they are certified to be in compliance with IEC 60825 as aclass 1laser

product. Consult the label on each part for laser certification numbers and approval information.

CAUTION:

This product might contain one or more of the following devices: CD-ROM drive, DVD-ROM drive,

DVD-RAM drive, or laser module, which are Class 1laser products. Note the following information:

vDo not remove the covers. Removing the covers of the laser product could result in exposure to

hazardous laser radiation. There are no serviceable parts inside the device.

vUse of the controls or adjustments or performance of procedures other than those specified herein

might result in hazardous radiation exposure.

(C026)

CAUTION:

Data processing environments can contain equipment transmitting on system links with laser modules

that operate at greater than Class 1power levels. For this reason, never look into the end of an optical

fiber cable or open receptacle. (C027)

CAUTION:

This product contains aClass 1M laser. Do not view directly with optical instruments. (C028)

CAUTION:

Some laser products contain an embedded Class 3A or Class 3B laser diode. Note the following

information: laser radiation when open. Do not stare into the beam, do not view directly with optical

instruments, and avoid direct exposure to the beam. (C030)

vii

Power and cabling information for NEBS (Network Equipment-Building System)

GR-1089-CORE

The following comments apply to the servers that have been designated as conforming to NEBS

(Network Equipment-Building System) GR-1089-CORE:

The equipment is suitable for installation in the following:

vNetwork telecommunications facilities

vLocations where the NEC (National Electrical Code) applies

The intrabuilding ports of this equipment are suitable for connection to intrabuilding or unexposed

wiring or cabling only. The intrabuilding ports of this equipment must not be metallically connected to the

interfaces that connect to the OSP (outside plant) or its wiring. These interfaces are designed for use as

intrabuilding interfaces only (Type 2or Type 4ports as described in GR-1089-CORE) and require isolation

from the exposed OSP cabling. The addition of primary protectors is not sufficient protection to connect

these interfaces metallically to OSP wiring.

Note: All Ethernet cables must be shielded and grounded at both ends.

The ac-powered system does not require the use of an external surge protection device (SPD).

The dc-powered system employs an isolated DC return (DC-I) design. The DC battery return terminal

shall not be connected to the chassis or frame ground.

viii Cabling your server

Cabling your server

Learn how to cable your server with aconsole or interface that is available for your server. This might

include the Advanced System Management Interface (ASMI), Hardware Management Console (HMC), or

Integrated Virtualization Manager.

To learn more about the cabling options that are available for your server, see the following console and

interface descriptions.

Advanced System Management Interface

The Advanced System Management Interface (ASMI) is the interface to the service processor that

allows you to perform general and administrator-level service tasks, such as reading service

processor error logs, reading vital product data, setting up the service processor, and controlling

the system power. The ASMI might also be referred to as the service processor menus. Set up

access to the ASMI if you plan to manage the AIX®or Linux®operating systems without an

HMC. The ASMI can also be used to setup your Virtual I/O Server (VIOS).

Hardware Management Console

The Hardware Management Console (HMC) is adedicated workstation that runs integrated

system management software. The HMC manages hardware tasks and configures logical

partitions on managed systems. It also acts as afocal point for hardware detection and reporting.

Integrated Virtualization Manager

The Integrated Virtualization Manager provides aWeb-based system management interface and a

command-line interface that you can use to manage and configure servers that use the Virtual

I/O Server. On the managed system, you can create logical partitions, manage the virtual storage

and virtual Ethernet, and view service information related to the server. The Integrated

Virtualization Manager is packaged with the Virtual I/O Server, but it is enabled only on certain

platforms and where no Hardware Management Console (HMC) is present.

Cabling amodel 03E/4A and the Hardware Management Console

Learn how to cable the expansion units, if applicable to your server; connect the external cables, power

cords, and Hardware Management Console (HMC) cables; attach devices; and route the cables after you

install all of your hardware features or before you replace parts.

About this task

DANGER

When working on or around the system, observe the following precautions:

Electrical voltage and current from power, telephone, and communication cables are hazardous. To

avoid ashock hazard:

vConnect power to this unit only with the provided power cord. Do not use the provided power

cord for any other product.

vDo not open or service any power supply assembly.

vDo not connect or disconnect any cables or perform installation, maintenance, or reconfiguration

of this product during an electrical storm.

vThe product might be equipped with multiple power cords. To remove all hazardous voltages,

disconnect all power cords.

vConnect all power cords to aproperly wired and grounded electrical outlet. Ensure that the outlet

supplies proper voltage and phase rotation according to the system rating plate.

vConnect any equipment that will be attached to this product to properly wired outlets.

vWhen possible, use one hand only to connect or disconnect signal cables.

vNever turn on any equipment when there is evidence of fire, water, or structural damage.

vDisconnect the attached power cords, telecommunications systems, networks, and modems before

you open the device covers, unless instructed otherwise in the installation and configuration

procedures.

vConnect and disconnect cables as described in the following procedures when installing, moving,

or opening covers on this product or attached devices.

DANGER

To Disconnect:

1. Turn off everything (unless instructed otherwise).

2. Remove the power cords from the outlets.

3. Remove the signal cables from the connectors.

4. Remove all cables from the devices

(D005a)

DANGER

To Connect:

1. Turn off everything (unless instructed otherwise).

2. Attach all cables to the devices.

3. Attach the signal cables to the connectors.

4. Attach the power cords to the outlets.

5. Turn on the devices.

(D005a)

To cable your server:

Before you begin

__ If you have hardware features that are not installed, install them now. For instructions, see Installing and

configuring the system and system devices .For information about specific models, see:

v03E/4A

2Cabling your server

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bull Server Handbücher

Bull

Bull NovaScale T860 E1 Bedienungsanleitung

Bull

Bull Escala EPC400 Kurzanleitung

Bull

Bull escalata t430 Bedienungsanleitung

Bull

Bull Escala Power7 Series Betriebsanleitung

Bull

Bull NovaScale T840 F3 Bedienungsanleitung

Bull

Bull Escala E2-700T Bedienungsanleitung

Bull

Bull Escala PL 245T/R Betriebsanleitung

Bull

Bull Escala PL 600T Bedienungsanleitung

Bull

Bull ESCALA Power7 5886 Bedienungsanleitung

Bull

Bull NovaScale Blade 20 Series Betriebsanleitung

Bull

Bull NovaScale 4020 Bedienungsanleitung

Bull

Bull NovaScale R460 E1 Bedienungsanleitung

Bull

Bull Escala E5-700 Bedienungsanleitung

Bull

Bull NovaScale T840 E2 Bedienungsanleitung

Bull

Bull NovaScale 5000 Series Bedienungsanleitung

Bull

Bull Escala Power7 Series Bedienungsanleitung

Bull

Bull Escala Power7 Series Bedienungsanleitung

Bull

Bull ESCALA PL860T/R Gebrauchs- und Pflegehandbuch

Bull

Bull Escala Power7 Series Bedienungsanleitung

Bull

Bull Novascale R423-E2 Bedienungsanleitung

Bull

Bull NovaScale 5xx5 Bedienungsanleitung

Bull

Bull Escala Power7 Series Handbuch

Bull

Bull DPS 7000 Bedienungsanleitung

Bull

Bull NovaScale R630 E1 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung