Bullard SceneCatcher Bedienungsanleitung

SceneCatcher™ Digital Video Recorder

Version 2.0 User Manual

for the Bullard T3 series, T4 and TacSight Series Thermal Imagers

www.bullard.com

Attaching the SceneCatcher

The Bullard Thermal Imager (TI) can be equipped with

an optional SceneCatcher digital video recorder. The

SceneCatcher is housed in a convenient handle. To

attach the handle to the TI, simply align the handle so

the handle brackets cradle the TI just under the display

and the electrical contacts on the handle align with

corresponding contacts on the TI (Figure 1). Turn the

thumbscrew until it is tightened and the handle is fully

secure. To disconnect the SceneCatcher handle, loosen

the thumbscrew and remove the handle from the thermal

image.

NOTE

The electrical contacts on the TI that connect with

the SceneCatcher may require periodic cleaning.

To clean these contacts, use soapy water and a

non-abrasive cloth or a cotton swab and isopropyl

alcohol. Rubbing a pencil eraser on the contacts is

another effective, non-abrasive means to clean the

contacts.

Using the SceneCatcher

The SceneCatcher is powered via the TI’s 10-Volt NiMH

rechargeable battery, while the TI is powered on. It

functions through the use of one button only. The button,

or Momentary Switch, located on the left outer circle

of the pistol grip handle controls both image and video

capture (Figure 2). The download feature, which allows

image and video to be downloaded to a computer, is

functional only when the SceneCatcher is powered on and

connected through a USB cable. The USB port is located

on the front right side of the handle (Figure 3).

SceneCatcher Only Mode: When the SceneCatcher

is attached to the TI and powered on, the unit will

perform a six second calibration sequence after which

the LED indicator will illuminate green. No function of the

SceneCatcher has yet been initiated. The solid green LED

indicates the Standby/Ready mode.

To engage the Image Capture Mode, begin with a

solid green LED. Depress the Momentary Switch for less

than one second. The green SceneCatcher LED will turn

red while the image is being generated, and then it will

return to green (ready mode) when the SceneCatcher has

completed generating the image.

To engage the Video Capture Mode, begin with

a solid green LED. Depress the Momentary Switch for

more than two seconds. The green SceneCatcher LED will

produce an alternating green/red flash (approximately

one flash per second) while the video is being generated.

Press the Momentary Switch again to disable the video

capture mode. The SceneCatcher LED will return to green

(ready mode) when the SceneCatcher has completed

capturing the video.

SceneCatcher Low Memory Mode: When the

SceneCatcher memory storage capacity is low, the LED

indicator will flash red. No function of the SceneCatcher

has yet been initiated. The flashing red LED indicates

the standby/ready mode with low memory. To free up

additional space on the SceneCatcher, copy images and

videos to a PC and delete them from the SceneCatcher.

When memory capacity has been reached, the

SceneCatcher LED will illuminate solid red to indicate the

memory is full.

Figure 1

Figure 3

USB port

The SceneCatcher 2.0

is compatible with the

following operating

systems:

Windows 7

Windows 7 x64

Windows Vista

Windows Vista x64

Windows XP

Windows XP x64

Momentary Switch

Figure 2

www.bullard.com

Installing the SceneCatcher Software

With the SceneCatcher powered on, connect the USB cable to the port on the

SceneCatcher and to a PC.

Upon connection, after a few seconds a window will appear as seen in

Figure 10 or Figure 11.

Windows XP Users:

Double-click Launch Bullard SceneCatcher Setup. You will be prompted

with a “Run As” window as seen below. Confirm that the checkbox below

‘Current user’ is unchecked and then click “OK”. When complete, move on

to Figure 6 - Welcome.

Figure 4

Windows Vista Users:

Double-click Launch Bullard SceneCatcher Setup. You may then be

prompted with a message confirmation to run the program “Setup.exe”.

If so, select “Run Setup.exe” and continue. When complete, move on to

Figure 6 - Welcome.

Windows 7 Users:

Double-Click “Open folder to view files” as seen in Figure 11. Then

double-click “BullardSceneCatcher” as seen in Figure 5. You may then be

prompted with a message confirmation to run the program “Setup.exe”. If

so, select “Run Setup.exe” and move on to Figure 6 - Welcome.

Figure 6 - Welcome

Click “Next”.

Figure 7 - License Agreement

To accept the license agreement terms and conditions, click “I agree”.

NOTE

If you do not click “I agree”, the SceneCatcher software installation

will abort, and you will not be able to access images and videos.

Figure 5

www.bullard.com

Figure 8 - Choose Components

By default, the SceneCatcher program will install. You can deselect the

Bullard Media Player skin if you do not want to install it. When the options

you want are selected, click “Next” (Figure 8).

Figure 9 - Choose Location

You can use the default directory for the SceneCatcher software or change

the location by selecting “Browse” and navigating to another directory.

When the location you want is selected, click “Install” (Figure 9). When

installation is complete, click “Finish”.

Using the SceneCatcher software

If not already connected, with the SceneCatcher powered on, connect the

USB cable to the port on the SceneCatcher and to a PC. Upon connection, a

Windows selection menu prompt appears.

Figure 10 - Windows XP and Vista Selection Menus

Figure 11 - Windows 7 Selection Menu

SceneCatcher™ Digital Video Recorder

Version 2.0 User Manual

for the Bullard T3 series, T4 and TacSight Series Thermal Imagers

Americas:

E.D. Bullard Company

1898 Safety Way

Cynthiana, KY 41031-9303

Toll free: 877-BULLARD (285-5273)

Tel: 859-234-6616

Fax: 859-234-8987

www.bullard.com

Europe:

Bullard GmbH

Lilienthalstrasse 12

53424 Remagen • Germany

Tel: +49-2642 999980

Fax : +49-2642 9999829

www.bullardextrem.com

Asia-Paciﬁc:

Bullard Asia Paciﬁc Pte. Ltd.

LHK Building

701, Sims Drive, #04-03

Singapore 387383

Tel: +65-6745-0556

Fax: +65-6745-5176

www.bullard.com 6050048302 (1110)

ISO 9001

certiﬁed

Using and managing files

From this menu, you can open the folder containing the videos and images,

play or view files using the default media player or editor, and transfer

files. You can copy, cut, and/or paste files located on the SceneCatcher to

your PC for archiving. Consult your PC’s Windows documentation for further

information on how to view, play, and manage image and video files.

Additional software features:

The SceneCatcher software installs in the system tray in Windows. The

system tray is usually located in the bottom right corner of your PC’s display

and contains an assortment of system and software icons. The SceneCatcher

software will be shown as a green Bullard logo icon “ ” and will display

“Bullard SceneCatcher” when rolling over the icon with your mouse. To

access software features, right click the icon and select the feature from the

SceneCatcher menu.

NOTE

You may need to expand the system tray to see the Bullard icon. To do

this, click “Show hidden icons” in your Windows system tray.

Figure 12 - Bullard Icon Right Click Menu

From the SceneCatcher Menu, you can:

• Open Videos

• Open Images

• Safely Remove the SceneCatcher

• Synchronize Clock

• Read Frequently Asked Questions (FAQs)

• Access Device Information

Open videos: Opens the directory on the SceneCatcher containing videos.

Open Images: Opens the directory on the SceneCatcher containing images.

Safety Remove: Enables safe removal of the SceneCatcher from the PC in

order to protect against data loss.

Synchronize Clock: Updates the SceneCatcher internal clock by

synchronizing it to the PC’s clock.

Frequently Asked Questions (FAQs): Provides answers to frequently

asked SceneCatcher questions.

About: Displays SceneCatcher Version information.

Warranty

Bullard warrants to the original purchaser that the SceneCatcher Digital

Video Recorder is free of defects in materials and workmanship under

normal use and service for a period of one year from the date of purchase.

Bullard’s obligation under this warranty is limited to repairing or replacing,

at Bullard’s option, articles that are returned within the warranty period and

that, after examination, are shown to Bullard’s satisfaction to be defective,

subject to the following limitations:

a. Article must be returned to Bullard with shipping charges prepaid.

b. Article must not be altered from its original configuration.

In no event shall Bullard be responsible for damages, loss of use, or other

indirect incidental, consequential or special costs, expenses, or damages

incurred by the purchaser, notwithstanding that Bullard has been advised of

the possibility of such damages.

ANY IMPLIED WARRANTIES, INCLUDING WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE

LIMITED IN DURATION TO TWO YEARS FROM THE DATE OF PURCHASE OF

THIS PRODUCT.

Service

Should your SceneCatcher require service, simply call Bullard Customer

Service at 877-BULLARD (877-285-5273) to request a return authorization.

Please have the SceneCatcher serial number available. The serial number is

located on the top of the handle between the electrical contacts.

Bullard® is a registered trademark of Bullard.

Windows XP, Windows Vista and Windows 7 are

trademarks of Microsoft®.

Andere Bullard Kamerazubehör Handbücher

Bullard

Bullard TacPole Bedienungsanleitung

Beliebte Kamerazubehör Handbücher anderer Marken

Viltrox

Viltrox EF-NEX Montageanleitung

Calumet

Calumet 7100 Series CK7114 Bedienungsanleitung

Ropox

Ropox 4Single Series Bedienungsanleitung

Cambo

Cambo Wide DS Digital Series Betriebsanleitung

Samsung

Samsung SHG-120 Bedienungsanleitung

Ryobi

Ryobi BPL-1820 Bedienungsanleitung

Aegis

Aegis ABL-36020P Bedienungsanleitung

Pentax

Pentax Data Back Fc Bedienungsanleitung

Fantasea

Fantasea EyeGrabber F Series Bedienungsanleitung

Honeywell

Honeywell HDZ20HD Bedienungsanleitung

EGO

EGO BA1400T Bedienungsanleitung

Sima

Sima SRW-62 Bedienungsanleitung

Shape

Shape A7SSMKIT Bedienungsanleitung

Slide Kamera

Slide Kamera HST-2 Bedienungsanleitung

Power works

Power works 2902613 Bedienungsanleitung

SES

SES SE-2047-2 Bedienungsanleitung

Olympus

Olympus PT-EP05L Bedienungsanleitung

Starlite

Starlite OctoDome nxt Bedienungsanleitung