Burtonsafes PS310 Bedienungsanleitung

USER

INSTRUCTION GUIDE

Issue PR2

Burton Safes is a specialist supplier of physical security

solutions. Founded in 1990, near Huddersfield, we are

proud of our Yorkshire heritage, whilst maintaining a

global outlook.

We offer our customers a large range of products

including safes, secure cabinets, vaults & secure rooms,

security doors, grilles, key safes and locking systems.

We also deliver bespoke solutions and 24/7after sales

service throughout the UK.

We believe passionately in the independent testing and

certification of our products. We use some of Europe’s

best-known laboratories to rigorously test our products

and to ensure production quality. As a result, our

products are widely accepted by the UK Insurance

Industry, Government and Secured by Design, the UK

Police’s Preferred Specification scheme.

We hope that you are satisfied with your recent purchase.

If you need any assistance, please call us on 01484 663388

or email [email protected] . Additionally, you

can find lots of useful information in our website

knowledge bank www.burtonsafes.co.uk

Who are Burton Safes?

Thank you

for your purchase from

CONTENTS

Key Locking

PS310 Lock

Eurovault Aver S2

Burton Home Safe

Eurovault Aver G0

Firesec 4/60

Burton Duo Lock

Eurovault Aver Grade 1-5

Firesec 10/60

Fire Resistant Cabinet Lock

Firebrand Lock

Firebrand & Firebrand XL

Fixing Guide

Warranty

Page

USER INSTRUCTIONS - KEY LOCKING

How to open the safe

ABOUT THE KEY LOCK

The safes are supplied with 2 keys. Keep the keys in a secure place - but not in the

safe! If both keys are lost, the safe will have to be forced open.

Please note that the key will only fit inside the lock in one position. Do not force the

key into the lock.

• Insert the key into the key hole

• Turn the key clockwise until it stops

• Rotate the handle until the bolts are fully retracted

• Open the door

NOTE: If your safe has dual key locking you must unlock the top lock first. If you have a dual key

and electronic locking safe, unlock the key lock first then follow the Burton Duo instructions in the

booklet for the electronic lock.

How to close the safe

• Ensure that the bolts are fully retracted (if necessary rotate the

handle)

• Gently push the door shut. Always ensure that there are no

objects or people in the way of the closing door

• Turn the handle until the bolts are fully engaged

• Turn the key anti-clockwise until it stops

• Remove the key from the lock

USER INSTRUCTIONS - PS310 LOCK

How to open the safe

ABOUT THE LOCK

This lock requires a 6-digit code to open the

lock. You can have a master code and up to 9

user codes. In order to activate the user codes,

you will need the master code. The master code

can’t be deleted but you can remove user codes.

The lock also features dual code opening and

time delay opening.

• Press the [ON] key

• Enter a valid 6-digit code (the factory default is ‘123456’)

• Press the [ENTER] key

• Within 4 seconds, turn the handle clockwise until the stop position is

reached

• Open the safe door

Incorrect Entry

• If an incorrect code has been entered, the red LED will flash

• After 3 incorrect entries, a penalty time of 1 minute will begin. During

this time no other code entries can be made

• When the penalty time is over press the [ON] key

• Enter a valid 6-digit code

NOTE: Everytime an incorrect entry code is entered continuously the penalty time is

extended for 2, 4, 8, up to the maximum of 16 minutes

How to close the safe

• Ensure that the bolts are fully retracted (if necessary rotate the handle

clockwise to retract the bolts)

• Gently push the door shut. Always ensure that there are no objects or

people in the way of the closing door

• Turn the handle anti-clockwise until the stop position is reached

Changing the master code

• Open the lock using a valid 6-digit master code

• Open the safe door

• Press the [ON] key

• Press the [ENTER] key

• Press key [1] followed by the [ENTER] key

• Enter the existing 6-digit master code (the factory default is ‘123456’)

• Press the [ENTER] key

• Enter a new 6-digit code followed by the [ENTER] key

• Re-enter the new 6-digit code, then press the [ENTER] key to confirm

Activating a user code

(using the master code)

There are 9 user codes under the user numbers 1-9. To set up a user

code, you need to input the user number first.

• Press the [ON] key

• Press the [ENTER] key

• Press key [2] followed by the [ENTER] key

• Enter the user number you want to set up, i.e. enter key [1] for user

number 1 or key [2] for user number 2 and so on

• Press the [ENTER] key

• Enter the 6-digit MASTER code followed by the [ENTER] key

• Enter a new 6-digit code for your chosen user code

• Press the [ENTER] key

• Re-enter the new 6-digit user code, then press the [ENTER] key to

confirm

• Press the [ON] key

• Press the [ENTER] key

• Press key [0] followed by the [ENTER] key

• Enter the user number for the code you wish to delete, i.e. key [2]

• Press the [ENTER] key

• Enter the existing 6-digit MASTER code followed by the [ENTER] key

Deleting a user code

(using the master code)

• Press the [ON] key

• Press the [ENTER] key

• Press key [3] followed by the [ENTER] key

• Enter the user number for the code you wish to change, i.e. key [2]

• Enter the existing 6-digit user code

• Press the [ENTER] key

• Enter a new 6-digit code followed by the [ENTER] key

• Re-enter the new 6-digit code, then press the [ENTER] key to confirm

Changing a user code

(using a user code)

Turning on the Dual Code function

The Dual Code function means that you will require 2 different codes to

open the safe, the master code and any other user code. Ensure that you

have at least one user code programmed in the lock as well as the master

code before you turn on this function.

• Press the [ON] key

• Press the [ENTER] key

• Press key [7] followed by the [ENTER] key

• Enter the 6-digit master code followed by the [ENTER] key

Opening the safe with the Dual Code function

• Press the [ON] key

• Press key [0] followed by the [ENTER] key

• Enter the 6-digit master code followed by the [ENTER] key

• Within 1 minute enter a user number i.e. press key [2], followed by the

[ENTER] key

• Enter the 6-digit user code for that user followed by the [ENTER] key

Turning off the Dual Code function

• Press the [ON] key

• Press the [ENTER] key

• Press key [8] followed by the [ENTER] key

• Enter the 6-digit master code followed by the [ENTER] key

Programming the Time Delay

A Time Delay is the time you have to wait in between the entry of your

code and the opening of your safe. An Open Window is the amount of

time you have to open your safe after the time delay. For example, if

you wanted a 30 minute Time Delay and a 9 minute Open Window, this

would mean that once you have entered a valid 6-digit code, you have

to wait 30 minutes before you can open the safe door. After 30 minutes

you will have 9 minutes to open the safe door. If you wait longer than 9

minutes, you have to start the process again. In this lock you can program

a Time Delay from 1 - 99 minutes and an Open Window of 1 - 9 minutes.

• Press the [ON] key

• Press the [ENTER] key

• Press key [6] followed by the [ENTER] key

• Enter the 6-digit master code followed by the [ENTER] key

• Enter the 3 digits for your Time Delay and Open Window, i.e. [3][0][9]

(this would be for a 30 minute Time Delay and a 9 minute Open

Window)

• Press the [ENTER] key

Opening the safe with the Time Delay

• Press the [ON] key

• Enter a valid 6-digit code

• Press the [ENTER] key

• Wait for the Time Delay to finish. An acoustic signal will sound when

the Time Delay is over, i.e. 30 minutes

• Re-enter the same 6-digit code during the Open Window

• Press the [ENTER] key

How to remove the Time Delay

• Press the [ON] key

• Press the [ENTER] key

• Press key [6] followed by the [ENTER] key

• Enter the 6-digit master code followed by the [ENTER] key

• Enter [0][0][0]

• Press the [ENTER] key

• Within 4 seconds, turn the handle clockwise until the stop position is

reached

• Open the safe door

Power supply / Battery change

A series of beeps indicates that the battery is weak and must be replaced.

• Only use 9V ALKALINE batteries with this lock

• Burton Safes recommend the Duracell brand

To change the battery, you will need to open the safe and remove the

plate on the back of the door with a small screwdriver.

Press the catch on the top edge of the battery

cover with a screwdriver and lever off the battery

lid. Pull the battery out carefully until the battery

clip is visable. Release the battery from the clip

and replace. When the new battery is in place,

re-engage the lid.

Please ensure that the cable is not damaged.

Emergency power supply

• If the safe has run out of power hold a 9V

Duracell battery to the front of the

lock against the + and - connectors

• While keeping contact at all times

with the battery, press the [ON] key

• Enter a valid 6-digit code followed

by the [ENTER] key

• Within 4 seconds, turn the handle

clockwise until the stop position is reached

• Once inside the safe, follow the above instructions

to change the battery

USER INSTRUCTIONS - BURTON DUO LOCK (SWING BOLT)

How to open the safe

ABOUT THE LOCK

This lock requires a 6-digit code to open the

lock. You can have 2 different codes on this lock,

the master code and the secondary code. This

lock can also have a time delay activated of 1-99

minutes and an open period of 1-19 minutes.

• Enter a valid 6-digit code (the factory default is ‘123456’)

• If the code has been entered correct the lock will beep twice

• Within 3 seconds turn the handle to the open position

• Open the safe door

Incorrect Entry

• If an incorrect code has been entered, it will be followed by a long beep

• After 4 incorrect entries, a penalty time of 5 minutes will begin. During

this time, no other code entries can be made

• When the penalty time is over enter a valid 6 digit code

NOTE: 2 more consecutive invalid codes will restart an additional 5 minutes penalty time

How to close the safe

• Ensure that the bolts are fully retracted (if necessary rotate the handle

clockwise to retract the bolts)

• Gently push the door shut. Always ensure that there are no objects or

people in the way of the closing door

• Turn the handle bar anti-clockwise until the stop position is reached

Inhaltsverzeichnis

Andere Burtonsafes Sicher Handbücher

Burtonsafes

Burtonsafes Torino GMT/4P Bedienungsanleitung

Burtonsafes

Burtonsafes Hotel Standard Bedienungsanleitung

Burtonsafes

Burtonsafes Keyguard XL Bedienungsanleitung

Burtonsafes

Burtonsafes AVER S2 Montageanleitung

Burtonsafes

Burtonsafes Keyguard DigitalXL Bedienungsanleitung

Burtonsafes

Burtonsafes KS Series Bedienungsanleitung

Burtonsafes

Burtonsafes Standard MK/II Bedienungsanleitung

Burtonsafes

Burtonsafes Biosec Home Bedienungsanleitung

Burtonsafes

Burtonsafes KEYGUARD ELECTRONIC SIZE 1 Bedienungsanleitung

Burtonsafes

Burtonsafes BRIXIA Bedienungsanleitung

Burtonsafes

Burtonsafes BURTON HOME G1 Bedienungsanleitung

Burtonsafes

Burtonsafes OCULTO Bedienungsanleitung

Burtonsafes

Burtonsafes BURTON Home S2 Bedienungsanleitung

Burtonsafes

Burtonsafes Hotel Standard Bedienungsanleitung

Burtonsafes

Burtonsafes HOTEL PRIMO Bedienungsanleitung

Burtonsafes

Burtonsafes FIRESEC 4/60 Bedienungsanleitung

Burtonsafes

Burtonsafes PRIMO HOME SAFE Bedienungsanleitung

Burtonsafes

Burtonsafes Keyguard Bedienungsanleitung

Burtonsafes

Burtonsafes HOTEL POP UP Bedienungsanleitung

Burtonsafes

Burtonsafes Keyguard Jupiter Bedienungsanleitung

Burtonsafes

Burtonsafes Keyguard Combi Bedienungsanleitung

Beliebte Sicher Handbücher anderer Marken

Squire

Squire Stronghold Keysafe Bedienungsanleitung

Phoenix

Phoenix FS0352C Produktinformationsblatt

Phoenix

Phoenix KS0030E Series Bedienungsanleitung

Vaultek

Vaultek 10 Series Technisches Datenblatt

Arregui

Arregui CLASS Bedienungsanleitung

Beaumont

Beaumont SMART KEYBOX Bedienungsanleitung

Honeywell

Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Bedienungsanleitung

Hornady

Hornady SnapSafe Trunk Safe II Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA-HD5-BIO Bedienungsanleitung

Honeywell

Honeywell 5912 Bedienungsanleitung

Phoenix

Phoenix FS1280F Bedienungsanleitung

Phoenix

Phoenix SS0992K Produktinformationsblatt

Technomax

Technomax Trony Series Handbuch

SPORTS AFIELD

SPORTS AFIELD INSTINCT BIOMETRIC Series Bedienungsanleitung

RICHTER CZECH

RICHTER CZECH LA Bedienungsanleitung

Olymp

Olymp GOsafe 110 Bedienungsanleitung

Phoenix

Phoenix SS0100E Produktinformationsblatt

Clarke

Clarke Strong-Arm CS1000K Bedienungsanleitung