Bush CR-338PL Bedienungsanleitung
105mm (W) x 140mm (H)
Instruction Manual
CR-338PL
Large LED Alarm Clock Radio | Instruction manual
Table of content
Safety information
Battery installation
UK Mains Plug infromation
Funct ions & Control
Battery Backup
Standby Mode
Setting The Clock
Power On/radio Mode
Presetting Your Favourite Radio Stations
Dual Alarms Operation
Setting Alarm 1 or Alarm 2
Checking Alarm Time
Snooze Function
Sleep Timer Operation
NAP FUNCTION
Dimmer Control
Specification
3
4
4
6
................................................................................
............................................................
.........................................................................
...............................................................................
................................................................................
..........................................................................
...................................................................
.............................................................................
..........................................
....................................................................
................................................................
.......................................................................
.............................................................................
....................................................................
..........................................................................
...................................................................................
..............................................................................
...................................................................................
3
2
4
5
5
5
5
6
6
Setting Sleep Timer
7
7
7
7
7
8
Radio Operation
Help and guidance
................................................................................
1
Product support
.............................................................................
9
Disposal 9
...................................................................................
Guarantee
Important Data Protection information
................................................
10
11
................................................................................
...................................................................
1
You’ll soon be enjoying your new Alarm Clock Radio.
It all begins here, with your instructions. Don’t worry, there’s nothing too
technical coming up. Just simple, step-by-step guidance to get you up and
running quickly. Sound good? Then let’s get started.
Help and Guidance
We’re here to help you get the most from your radio. Should you require any
guidance, a simple solution can often be found online at:
www.argos-support.co.uk
If you still require further assistance, call one of our experts on 0345 604 0105.
2
Safety Information
Important – Please read these instructions fully before
installing or operating
This appliance is intended for domestic household use only and should not
be used for any other purpose or in any other application, such as for
non-domestic use or in a commercial environment.
The ventilation should not be impeded by covering the ventilation openings
with items, such as newspapers, table-cloths, curtains, etc.
No naked flame sources, such as lighted candles, should be placed on the
apparatus.
The apparatus shall not be exposed to dripping or splashing and that no
objects filled with liquids, such as vases, shall be placed on the apparatus.
Ventilation - Allow at least a 10 cm gap all around the product.
This apparatus is not suitable for use in a tropical climate.
Prior to cleaning or other maintenance, the appliance must be disconnected
from the supply mains.
Batteries (battery pack or batteries installed) shall not be exposed to
excessive heat such as sunshine, fire or the like.
To protect the environment, use local recycling facilities for battery disposal.
Where the MAINS plug is used as the disconnect device, the disconnect
device shall remain readily operable.
The marking plate is located at the bottom of the apparatus.
This means of disconnecting this apparatus from the mains supply is the mains
plug. This should be unobstructed and readily operable at all time.
3
Battery installation (backup only)
Only adults should handle battery. Do not allow a child to use this apparatus
unless the battery cover is securely attached to the unit.
Insert 2 x 1.5V AAA size batteries (not included) in to the compartment,
taking care to match the battery orientations marked on the inside of the
compartment.
Replace the battery compartment cover.
UK Mains plug information
This appliance must be connected to AC 230-240 volts 50Hz. AC supply by
means of a three pin socket, and should be protected by a 3 Amp fuse.
If the mains plug is unsuitable for the socket outlet in your home or is removed
for any other reason, then the cut off plug should be disposed of safely to
prevent the hazard of electric shock.
The wires in the mains lead on this appliance are coloured in accordance with
the following code:
Blue – Neutral
Brown – Live
Under no circumstances should Neutral or Live wires be connected to the ‘E’
(Earth) terminal.
4
FUNCTIONS & CONTROL
1. POWER button
2. Display
3. VOL + / AL1 button
4. VOL - / AL2 button
5. FM aerial
6. TU+ / HOUR button
7. TU- / MIN button
8. SLEEP / NAP button
9. SET button
10.SNOOZE / DIMMER
button
11.BAND button
12.MEM button
13.Battery cover
Indicator lights
14.Alarm 1 buzzer
15.Alarm 1 radio
16.Alarm 2 buzzer
17.Alarm 2 radio
18.PM indicator (12 hour version)
BATTERY BACKUP
The clock, alarm and preset settings can be protected against AC power
failure with the battery for a short period of time. If no backup battery is
installed or the power failure is prolonged, you will need to set the clock, alarm
and preset settings again.
STANDBY MODE
Place the unit on a flat stable surface and plug the power cord into the mains
socket.
The unit is in standby mode
“12:00” will flash on the display.
5
SETTING THE CLOCK
1. In standby mode, while the display flashes repeatedly, press HOUR / MIN
to set the hours and minutes.
Press and hold HOUR / MIN to advance the hour and minute until the
correct time is reached.
2. Press SET to confirm.
The display will stop flashing.
POWER ON/RADIO MODE
Press POWER to switch the unit on and enter the radio mode.
The radio frequency will briefly appear on the display and then return to
clock time.
RADIO OPERATION
1. Press POWER to turn on the radio.
The default FM radio frequency is 87.5 MHz.
2. Press BAND once to enter the AM radio mode.
The default AM radio frequency is 522 KHz.
3. Repeatedly press BAND to select the desired radio band.
4. Adjust the volume by repeatedly pressing VOL+ / VOL-.
5. Repeatedly press TU+ / TU- to tune into the desired station.
Press and hold TU+ / TU- for auto forward or backward radio station
searching.
NOTE:
For the best FM reception, extend the FM aerial to its full length.
For the best AM reception, rotate the unit slowly and horizontally.
PRESETTING YOUR FAVOURITE RADIO STATIONS
Up to 10 FM and 10 AM radio stations can be preset.
6
1. Follow steps in "RADIO OPERATION" and tune into
the station that you wish to preset.
2. Press and hold SET for about 2 seconds, “P01” will
flash on the display.
3. Press SET again to store the station.
4. Repeat steps 1 to 3 to store desired stations.
To listen to preset radio stations, repeatedly press MEM to select the desired
radio station.
DUAL ALARMS OPERATION
Before setting the alarm time, make sure the Clock has been set.
Setting Alarm 1 or Alarm 2
1. In standby mode, press and hold AL1 / AL2 until “0:00” flashes on the
display.
2. While “0:00” is flashing, set the alarm time by repeatedly pressing HOUR /
MIN.
Press and hold HOUR / MIN respectively for fast advance.
3. Repeatedly press AL1 / AL2 to select the desired alarm mode (buzzer or
radio).
Checking alarm time
Press and hold AL1 / AL2 for 2 seconds, the alarm time will flash briefly then
return to clock time.
To turn off the alarm, press POWER and the alarm will come on again at the
set time on the following days.
To cancel the alarm, in standby mode, press AL1 / AL2 until the alarm
indicator light goes out on the display.
7
Snooze function
This function can be used to stop the alarm temporarily for about 9 minutes
once the alarm is activated. When the snooze button is pressed, the alarm
sounds will stop and sound again after about 9 minutes.
The alarm indicator light will flash.
SLEEP TIMER OPERATION
The sleep function is designed to automatically turn off the
Radio.
Setting sleep timer
1. In Radio mode, repeatedly press SLEEP to select the desired sleep time
from 90, 80, 70, 60, 50, 40, 30, 20 or 10 minutes.
2. The radio will be turned off after the set sleep time has elapsed.
To check remaining sleep time, press SLEEP.
To cancel sleep timer, press SLEEP until “OFF” is shown.
To turn off the radio before the sleep time has elapsed, press POWER.
NAP FUNCTION
This function allows you to set the radio to wake you after a preset interval (up
to 90 minutes) without needing to set the alarms.
1. In standby mode, repeatedly press NAP to select the desired nap time
from 90, 80, 70, 60, 50, 40, 30, 20 or 10 minutes.
2. When the selected nap time has elapsed, the radio will sound.
To cancel the nap timer, press NAP until “OFF” is shown.
Dimmer control
Repeatedly press DIMMER to adjust the brightness of display (bright or dim).
8
TECHNICAL SPECIFICATION
AM: 522-1620 KHz
FM: 87.5-108 MHz
Power source: AC 230V-240V ~50Hz, 5 W
Power consumption (clock only) : <1W
AM: 522-1620 kHz
FM: 87.5 – 108 MHz
Back-up Batteries : 2 x 1.5V “AAA” size batteries or equivalent(not included)
We apologise for any inconvenience caused by minor inconsistencies in these
instructions, which may occur as a result of product improvement and
development.
Inhaltsverzeichnis
Andere Bush Wecker Handbücher
