Bushnell Videoscope 73-7000V Bedienungsanleitung

Model # 737000V

Lit.#: 981065/1007

Instruction Manual

Videoscope

Videoscope 6LIM draft rev1.indd 1 10/29/07 12:51:06 PM

Videoscope 6LIM draft rev1.indd 2 10/29/07 12:51:06 PM

INDEX

English ..................... 2

Français.................. 20

Español................... 36

Deutsch .................. 52

Italiano ................... 68

Português................ 84

Instruction Manual

Manuel D’instructions

Manual de Instrucciones

Bedienungsanleitung

Manuale di istruzioni

Manual de Instruções

Videoscope 6LIM draft rev1.indd 3 10/29/07 12:51:06 PM

WARNING: The mounted Videoscope should never be used as a substitute

for a standard video or still camera, as it may result in your inadvertently

pointing the gun at another person. Before using the Videoscope, always

remember that all rearm safety precautions apply when it is mounted on a

rearm. Please read the safety instructions for your rearm before installing

and using the Videoscope. When handling rearms, always keep the muzzle

pointed in a safe direction. Always treat your rearm as if it were loaded. For

your safety and others, you must remove the Videoscope from your rearm

before playing back or downloading the stored videos. Please be responsible

and join Bushnell in supporting and following safe, responsible hunting and

shooting sport guidelines and practices at all times.

ENGLISH

Videoscope 6LIM draft rev1.indd 4 10/29/07 12:51:06 PM

Congratulations on your purchase of the Bushnell®Videoscope™! The unique Videoscope

digital video camera mounts right onto your riescope, allowing you to capture high quality

videos (with audio) of the highlights from your hunting trips, simply by pressing the record

button before taking aim at your target. Up to 30 minutes of high quality video can be held

in the Videoscope’s internal memory, ready for instant playback on the onboard 1.5” color

TFT-LCD, or downloading to your computer (compatible with Windows 2000, XP, Vista or

Mac OS X). The videos remain safely stored in the camera’s memory when it’s turned off,

or you can delete and replace them with new videos, as often as you like -without the need

to purchase a special memory card, or a video tape that could become worn or broken.

Before using your new Videoscope, please read the instructions contained in this manual

and take time to familiarize yourself with the camera’s operation and features.

Warning: Use care during handling to avoid touching the camera lens

to prevent degrading the image quality. Clean the camera lens only with

dry lens tissue or microﬁber cloth. DO NOT use liquids of any type.

Videoscope 6LIM draft rev1.indd 5 10/29/07 12:51:06 PM

Parts, Controls, and Display Guide

Camera

Lens

Microphone

USB

Port

Mounting

Rail

Remaining

Internal Memory

(seconds of video )

Resolution

Battery Indicator

White

Balance

(Auto)

Reset Button

Menu Button

Circular Keypad

w/ OK Button

Power

Button

Record

Button

Status LED

Note: All mounting parts are shown in

the section “Mounting the Videoscope”

Videoscope 6LIM draft rev1.indd 6 10/29/07 12:51:07 PM

CHARGING THE VIDEOSCOPE

The Videoscope is powered by an internal, rechargeable lithium-ion battery. Before using

the Videoscope for the rst time, it needs to be charged for approximately 10 hours (future

charge times should be shorter).

1. Plug the supplied USB cable into the AC Adapter (using the large, standard rectangular USB

plug), then insert the other end of the cable into the USB Port on the side of the Videoscope.

2. Plug the AC Adapter into a wall outlet. The Status LED on top of the Videoscope will glow

red, turning green when the battery is fully charged (the light on the AC adapter is just a power

indicator and will remain red). You may want to simply let the battery charge overnight-it will

not overcharge if left plugged in for longer than 10 hours. Note: A 12v DC car lighter plug is

also supplied for convenient recharging in the eld; however the initial full charge should be

done using an AC outlet. The car lighter plug is best used for restoring the battery to full charge

when it is becoming low, or only partly discharged.

3. The AC adapter can then be unplugged, and the USB cord removed from the Videoscope.

AC Adapter+USB Cable AC Adapter Connected to Videoscope Car Lighter Plug

Videoscope 6LIM draft rev1.indd 7 10/29/07 12:51:07 PM

MOUNTING THE VIDEOSCOPE

Mount the Videoscope on your riescope using the provided mounting hardware (see Fig. 1).

1. Slide one of the supplied mounting brackets (Fig. 1-A) onto the front of the mounting rail

(end closest to the lens) at the bottom of the Videoscope, moving it all the way down to the

display end of the rail until it stops (Fig. 2).

2. Insert one of the long allen head bolts (Fig. 1-B) through the hole in the side of the bracket,

then use the provided allen wrench (Fig. 1-E) to tighten the bolt into the threaded hole at the

other side of the bracket until the bracket can no longer be moved along the rail.

3. Repeat this process with the other mounting bracket, determining the position for this front

bracket by holding the Videoscope in place over the top of your riescope, moving the front

bracket back and forth on the rail until you nd a position that will not interfere with the

mounting rings which attach your riescope to your rearm. You may want to put the bolt

through the bracket rst, and tighten it just enough so that the bracket doesn’t fall off the rail,

but can still be slid freely along the rail. Once you nd the best position for the front bracket,

tighten it fully onto the rail (Fig. 3).

4. Slip the “U” shaped half-rings (Fig. 1-C) under your riescope so they are located below the

bottom of the Videoscope’s mounting brackets, and insert the supplied short bolts (Fig. 1-D)

through the top holes on the bracket into the half-rings, then tighten them until the Videoscope

is securely mounted onto the riescope tube (Fig 4). In a few unusual cases, you may nd it

necessary to temporarily remove the riescope from the rearm, attach the Videoscope brackets

to the riescope rst, then remount the riescope back onto the rearm.

Videoscope 6LIM draft rev1.indd 8 10/29/07 12:51:07 PM

5. Once this mounting process has been completed, the Videoscope can be removed to view or

download the videos on your computer, or to recharge the battery, by simply loosening the two

side (long) allen bolts slightly so that the Videoscope can be slid out of the mounting brackets

(which can remain in place on your riescope).

MOUNTING THE VIDEOSCOPE

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Videoscope 6LIM draft rev1.indd 9 10/29/07 12:51:08 PM

RECORDING A VIDEO

1. Turn on the Videoscope, by pressing and holding the Power button until the green

status LED light and the LCD display screen comes on.

2. Before beginning a new recording, check the battery indicator icon at the top of the

display to make sure you have a fully or at least partly charged battery. You may want

to set the date and time using the Menu options (see “Using the Video Menu”), as this

information is stored in the “le properties” of each video you shoot. The date/time

will not need to be reset unless the battery becomes completely discharged.

3. The display will show a “live” preview of the image from the camera lens. To begin

a video recording, simply press the Record button. The display will indicate that you

are recording (red video camera icon appears) and a counter showing the elapsed time

since the recording began will be visible at the top of the display.

4. Press the Record button again to stop recording. You may stop and start as often as

you like, recording videos of various lengths, until the memory is full. The memory

will hold a maximum of approximately 30 minutes of video-you are free to record one

long half hour video or any quantity of shorter videos-each time a new recording is

started then stopped, it will be saved in the internal memory as a separate video le

(.avi format).

5. To turn off the power, press and release the Power button-the display and the status

LED will go out and no power will be drawn from the internal battery.

Videoscope 6LIM draft rev1.indd 10 10/29/07 12:51:08 PM

Inhaltsverzeichnis

Sprachen:

Andere Bushnell Teleskop Handbücher

Bushnell

Bushnell VOYAGER 78-8000 Bedienungsanleitung

Bushnell

Bushnell Elite Tactical LMSS2 Bedienungsanleitung

Bushnell

Bushnell Elite Tactical LMSS2 Bedienungsanleitung

Bushnell

Bushnell 78-8830, 78-8845 Bedienungsanleitung

Bushnell

Bushnell 181561 Bedienungsanleitung

Bushnell

Bushnell VOYAGER 78-4500 Bedienungsanleitung

Bushnell

Bushnell Trophy XLT Bedienungsanleitung

Bushnell

Bushnell Voyager 78-9960 Bedienungsanleitung

Bushnell

Bushnell SportView 78-2061 Bedienungsanleitung

Bushnell

Bushnell ImageView 111545 Bedienungsanleitung

Bushnell

Bushnell North Star GOTO Bedienungsanleitung

Bushnell

Bushnell ImageView 78-7348 Bedienungsanleitung

Bushnell

Bushnell Voyager 78-9470 Bedienungsanleitung

Bushnell

Bushnell ImageView 111545 Bedienungsanleitung

Bushnell

Bushnell XTRA-WIDE 78-5456 Bedienungsanleitung

Bushnell

Bushnell 3" REFLECTOR Bedienungsanleitung

Bushnell

Bushnell Natureview 78-1645 Bedienungsanleitung

Bushnell

Bushnell NORTH STAR GOTO 78-8840 Bedienungsanleitung

Bushnell

Bushnell 78-9332 Bedienungsanleitung

Bushnell

Bushnell Discoverer 78-1600 Handbuch

Bushnell

Bushnell Voyager 78-3612 Bedienungsanleitung

Bushnell

Bushnell Model 78-9570 Bedienungsanleitung

Bushnell

Bushnell 78-8830 76mm Reflector Bedienungsanleitung

Bushnell

Bushnell 78-6114 Bedienungsanleitung

Beliebte Teleskop Handbücher anderer Marken

Meade

Meade 81005 Condor Bedienungsanleitung

Celestron

Celestron NexStar 6 SE Bedienungsanleitung

Meade

Meade 114 EQ-DS Bedienungsanleitung

Celestron

Celestron C4.5 Bedienungsanleitung

Meade

Meade LX200 CLASSIC Bedienungsanleitung

Leica

Leica 82 HD Bedienungsanleitung

Celestron

Celestron CPC DELUXE 800 HD Bedienungsanleitung

EASTCOLIGHT

EASTCOLIGHT 9920 Bedienungsanleitung

zoomion

zoomion Genesis 200 EQ Bedienungsanleitung

Orion

Orion 7832 Bedienungsanleitung

Carson

Carson Skelescope SK-100 Bedienungsanleitung

SKY-WATCHER

SKY-WATCHER VIRTUOSO Bedienungsanleitung

Celestron

Celestron Novice 50 Bedienungsanleitung

Orion

Orion EZ Finder 7228 Bedienungsanleitung

cassini

cassini C-JRS Bedienungsanleitung

nedis

nedis SCTE5060WT Bedienungsanleitung

Meade

Meade Polaris 60EQ-D Bedienungsanleitung

PlaneWave

PlaneWave CDK700 Bedienungsanleitung