5
INTRODUCTION
About the Trophy Cam HD Aggressor
The Bushnell Trophy Cam HD Aggressor is a digital scouting camera. It can be
triggered by any movement of game in a location, detected by a highly sensitive
Passive Infra-Red (PIR) motion sensor, and then take high quality pictures (up to
20MP or 24MP still photos), or video clips.
The Trophy Cam HD Aggressor consumes very little power (less than 0.08 mA) in
a stand-by (surveillance) state. This means it can deliver up to six months stand-by
operation time when the device is powered by the full capacity of AA alkaline batteries,
and up to twelve months utilizing lithium AA batteries. Once motion in the monitored
area is detected, the digital camera unit will be triggered at once (typically within
half a second) and then automatically take photos or videos according to previously
programmed settings. The Trophy Cam HD Aggressor is equipped with built-in
infrared LEDs that function as a flash, so that it delivers clear photos or videos (in
black & white) even in the dark, and it can take color photos or videos under sufficient
daylight. The Trophy Cam HD Aggressor HD is designed for outdoor use and is
resistant against water and snow.
Your trail camera is one of the latest generation of Bushnell Trophy Cam HD
Aggressor HDs, and includes many new or improved features, including:
• Auto PIR Sensitivity-the camera monitors ambient temperature conditions and
automatically adjusts the sensor/trigger signal to be more sensitive to slight
variations in temperature on hot days, less sensitive on cold days.
• Hyper NightVision-The IR LED Flash array now has increased range, brighter
output and better coverage for improved nighttime images. Models 119876 &
119877 feature "No-Glow" Black LEDs, invisible to game and other hunters.
• Field Scan 2x with Live Trigger-This “time lapse” feature includes the option
for a second block of recording with its own start/stop times. Trigger signals
generated by nearby wildlife activity will still generate additional photos/videos
as they normally would, independently of the Field Scan operation.
• GPS Geotag Capability-allows the user to input the longitude and latitude of
the camera’s position, which will be embedded in each photo file. This enables
Google Earth, Picassa and other geotag enabled software to automatically
show a map pinpointing each camera’s location when a group of photos are
reviewed on a computer. Especially useful for those who setup multiple Trophy
