BYECOLD Smart Mirror Benutzerhandbuch
Smart Mirror
INSTALLATION AND OPERATING INSTRUCTION
Questions?
Please call or email us – our friendly associates are ready to help.
Tel˖0086 516 83567656
Email˖in[email protected]
READ BEFORE USE
SCOPE OF DELIVERY
A: Smart Mirror h1
B: Screwh4
C: Dowelh4
D: Drill templateh1
E: Manualh1
zThank you for purchasing this Byecold product.
zP
lease read the instructions carefully before attempting to install,
operate or service the product.
zPlease retain this booklet for future reference.
zPictures for reference only, subject to our available products
CONTENTS
Product IntroductionĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ
Safety IntroductionĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ
Information about the deviceĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ
InstallationĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ
OperationĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ
MaintenanceĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ
TroubleshootingĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ
WarrantyĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ
PRODUCT INTRODUCTION
Byecold smart mirror is a device which with that functions as a bathroom mirror with
additional functions, such as displaying weather forecast, date and time, temperature and
humidity, LED lighting, defogging etc. Users can select the product with different
functions according to self-requirement. Please ignore the related operating instructions in
this booklet if you didn't subscribe some functions when ordering.
SAFETY INTRODUCTION
The following instructions should be strictly observed in order to prevent injury to the
users and other persons, or damage to property.
WARNING˖
zDo not ceiling mount those panels designed for wall only! Or else it may cause burning and fire!
zThis appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand the
hazards involved.
zChildren shall not play with the appliance. Cleaning and user maintenance shall not be made by
children without supervision.
zChildren of less than 3 years should be kept away unless continuously supervised.
zChildren aged from 3 years and less than 8 years shall only switch on/off the appliance provided
that it has been placed or installed in its intended normal operating position and they have been
given supervision or instruction concerning use of the appliance in a safe way and understand the
hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and
clean the appliance or perform user maintenance.
zIn order to avoid overheating and fire hazard, do not cover the device.
zThis device may get hot when in use and for a short period after use. To avoid burns, do not let bare
skin touch hot surfaces. Extreme caution is necessary when the device is used by or near children or
infirm persons.
zDo not use the device with wet or damp hands.
zNever insert any objects or limbs into the device.
zDo not use the device in potentially explosive rooms.
zDo not use near open flames. Do not store near heat sources.
zDo not place any objects, e.g. clothing, on the device.
zDo not use the device outdoors. Do not place the device on wet or flooded ground.
zDo not unplug by pulling on the cable. To unplug, grasp the plug, not the cable.
zDo not stretch the cable or place the cable under strain.
Keep cable away from heated surfaces.
zDo not stretch the cable or place the cable under strain. Do not run the cable under carpeting. Do
not cover the cable with throw rugs, runners, or similar coverings. Do not route the cable under
furniture or appliances. To avoid a tripping hazard arrange the cable away from traffic areas so that
it will not be tripped overDŽ
zDo not use on soft surfaces, such as a bed, where openings may become blocked.
zKeep combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains, at
least 0.9m (3 feet) from the front of the appliance and keep them away from the sides and rear when
the appliance is plugged in.
zIf the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
zIf there is a loose fit between the plug and the socket or the plug becomes very hot, the socket may
need to be replaced. Check with a qualified electrician to replace the socket.
zTurn off all controls before unplugging. Unplug before connecting any tool or accessory.
zAllow the device to cool down before transport and / or maintenance work.
zDo not privately disassemble the device or replace parts, otherwise it may cause mechanical failure,
electric shock, fire or body injury.
zThe warranty is not applicable for the product fault caused by private disassembly.
Warning˖
Do not cover.
Insert the mains plug into an outlet that is properly installed and grounded.
Do not locate directly below a mains electricity supply socket.
INFORMATION ABOUT DEVICE
TECHNICAL DATA
0RGHO %.'*
:/+
%.'*
:/+
%.'*:/+
%.'*
:/+
6L]H PP PP PP PP
7KLFNQHVV
˄DIWHULQVWDOO
˅
PP PP PP PP
1HW:HLJKW .* .* .* .*
5DWHG9ROWDJH
9+=
+HDWLQJ'HIRJJLQJ
3RZHU
:: :: :: ::
/('3RZHU : : : :
:HDWKHU'LVSOD\0
RGXOH
3RZHU $URXQG:
0DWHULDO
0LUURU$OXPLQXP
:HDWKHUVHUYHU <DKRR:HDWKHU
Note: Heating and Defogging functions should be mutually exclusive.
STRUCTURE
˄Front˅˄Back˅
ƻ
5
ƻ
6
ƻ
3
ƻ
2
ƻ
1
ƻ
7
ƻ
4
ʒMirror Surface ʓLED Strip Light
ʔTouch Switch ʕDisplay Screen˄Visible when double-click˅
ʖDefogging˄Visible when single click˅ʗMounting Brackets
ʘTemperature Humidity Sensor
INSTALLATION
˄1˅Choose the mounting position, keep the required minimum distances˗
˄2˅Mark the positions for the bore holes onto the drilling template (D) if there are no
existing marks. Stick the drilling template on the wall˗
˄3˅Drill the holes. Insert the screws into the dowels and fasten the screws. The screws
should protrude approx.1.5 cm from the dowels˗
˄4˅Tear off the back protective film, Hang the mirror (A) on the screws and move it to
one direction.
Note: please tear off the front and back protective film once you start to use.
OPERATION
START-UP˖
1. Check if the power cord is intact.
2. Check if the power supply voltage is consistent, the power socket is required to have a
grounding terminal and good grounding performance.
3. Whether the power cord plug and socket are matched, the socket can withstand
220-240V/50HZ, 10A. If it is lower than this value, it cannot be used to avoid accidents.
FUNCTIONAL OPERATING INSTRUCTIONS˖
1. After the power is turned on, the backlight of the touch button is always on;
Click the touch button once, the surrounding LED lights up, touch again, the light goes
out. If the LED lighting is not selected when ordering, click the touch button is invalid;
2. Double click the touch button once, the weather display screen is turned on, and double
click again to close;
3. Long press the touch button to turn on the heating or defogging function, the blue
heating indicator next to the touch button lights up, long press again to turn off
heating/Defogging. If the function of heating or fogging is not selected when ordering,
Long press the touch button is invalid.
WEATHER DISPLAY OPERATING INSTRUCTIONS˖
1. Ensure that the installation location has a good WIFI signal, and make the operating of
mobile phone and smart mirror APP connected to the same WIFI hotspot;
2. Double click the touch switch to start the screen and wait for the screen to display the
SCAN status;
3. Scan the QR code of the following figure (1) and install the APP according to the
prompts;
Note: This App only supports Android phone operation for the time being. The weather
display WIFI needs to use the Android phone only for the first time and when you
occasionally changes its settings later.
For IOS operating system, please search and install the APP named“WifiClock" in App
Store
Figure (1)Figure (2)
4. After the installation is successful, find the WifiClock application icon on the mobile
phone desktop and open it, as shown in the figure above (2);
5. After opening the app, the following interface is displayed, click to add a WIFI clock;
6. Next select the WIFI hotspot and enter the wireless password. The screen will display
the configuration, waiting for about 60 seconds, at the same time, the mirror screen
displays JOIN, then PAIR is set successfully.
7. After the pairing is successful, the following interface is displayed. A mobile phone
can add several WIFI clock terminals.
8. For each WIFI clock device, you can make the following settings
1) Basic setting: You can set the switch button sound. This button sound refers to
whether the buzzer inside the mirror is buzzing when the phone is operated. 24 hours/12
hours display selection; day and month mode selection; temperature unit selection; digital
tube display brightness adjustment on the mirror.
2) Alarm setting: Users can set several groups of alarms through the mobile phone. Until
the time, the buzzer alarm inside the mirror will sound.
3) Weather setting: After the weather scroll screen is turned on, the screen will scroll the
weather of the day and tomorrow (d2); the area setting is used to select the area where the
weather is to be displayed. The default is automatically set to the local area where the
network IP belongs. If the automatic positioning is not successful, you need to manually
set the area; server selection means that if the user finds that the displayed weather is
quite different from the actual weather, you can replace another server to get a more
accurate weather display; today's weather selection refers to whether the screen display is
real-time weather or the total forecast of the day.
Note: The weather information source of this APP application is Yahoo weather, and there
may be that the weather update is not timely.
4) Sleep mode: Refers to setting the digital light screen display timing, the screen system
will automatically reduce the brightness during sleep, to achieve the purpose that energy
saving or not affect the user's sleep;
5) Firmware version: Refers to the current software version, the system will
automatically update the version if necessary;
6Delete device: Refers to the mobile phone is no longer connected to the device, after
Inhaltsverzeichnis
Andere BYECOLD Körperpflegeprodukt Handbücher
Beliebte Körperpflegeprodukt Handbücher anderer Marken
HiB
HiB Spectre 50 Bedienungsanleitung
Carex
Carex SunLite Bedienungsanleitung
Roper Rhodes
Roper Rhodes Intense Stücklistenhandbuch
Interacoustics
Interacoustics Titan IMP440 Bedienungs- und Sicherheitshinweise
ReTrak
ReTrak VS001 Bedienungsanleitung
LED Technologies
LED Technologies dpl PAIN RELIEF Joint Wrap Bedienungsanleitung
