BYOC Classic Phaser Bedienungsanleitung
Build Your Own Clone
Classic Phaser
Kit Instructions
Warranty:
BYOC, Inc. guarantees that your kit will be complete and that all parts and components
will arrive as described, functioning and free of defect. Soldering, clipping, cutting,
stripping, or using any of the components in any way voids this guarantee. BYOC, INC
guarantees that the instructions for your kit will be free of any majors errors that would
cause you to permanently damage any components in your kit, but does not guarantee
that the instructions will be free of typos or minor errors. BYOC, INC does not
warranty the completed pedal as a whole functioning unit, nor do we warranty any of the
individual parts once they have been used. If you have a component that is used, but feel
it was defective prior to you using it, we reserve the right to determine whether or not the
component was faulty upon arrival. Please direct all warranty issues to:
Return:
BYOC, Inc. accepts returns and exchanges on all products for any reason, as long as they
are unused. We do not accept partial kit returns. Returns and exchanges are for the full
purchase price less the cost of shipping and/or any promotional pricing. Return shipping
is the customer’s responsibility. This responsibility not only includes the cost of
shipping, but accountability of deliver as well. Please contact
Tech Support:
BYOC, Inc. makes no promises or guarantees that you will successfully complete your
kit in a satisfactory manor. Nor does BYOC, Inc. promise or guarantee that you will
receive any technical support. Purchasing a product from BYOC, Inc. does not entitle
you to any amount of technical support. BYOC, Inc. does not promise or guarantee that
any technical support you may receive will be able to resolve any or all issues you may
be experiencing.
That being said, we will do our best to help you as much as we can. Our philosophy at
BYOC is that we will help you only as much as you are willing to help yourself. We
have a wonderful and friendly DIY discussion forum with an entire section devoted to the
technical support and modifications of BYOC kits.
www.byocelectronics.com/board
When posting a tech support thread on the BYOC forum, please post it in the correct
lounge, and please title your thread appropriately. If everyone titles their threads
“HELP!” then it makes it impossible for the people who are helping you to keep track of
your progress. A very brief description of your specific problem will do. It will also
make it easier to see if someone else is having or has had the same problem as you. The
question you are about to ask may already be answered. Here is a list of things that you
should include in the body of your tech support thread:
1. A detailed explanation of what the problem is. (more than, “It doesn’t work, help”)
2. Pic of the topside of your PCB.
3. Pic of the underside of your PCB.
4. Pic that clearly shows your footswitch/jack wiring and the wires going to the PCB
5. A pic that clearly shows your wiring going from the PCB to the pots and any other
switches(only if your kit has non-PC mounted pots and switches)
6. Is bypass working?
7. Does the LED come on?
8. If you answered yes to 6 and 7, what does the pedal do when it is in the "on" position?
9. Battery or adapter (if battery, is it good? If adapter, what type?)
Also, please only post photos that are in focus.
Copyrights:
All material in this document is copyrighted 2017 by BYOC, Inc.
Classic Phaser Kit Instruction Index
Parts Checklist……………………….................…....page 6
Populating the Circuit Board…….................…...…..page 8
Main PCB Assembly..................................................page 16
Wiring……………………………….........................page 19
Installing the IC/Finishing up………………….......page 25
Operation Overview...................................................page 26
Schematic....................................................................page 27
This is what your kit should look like when it’s complete. Your kit may come with
different color capacitors, switches etc. Don’t be alarmed by this. They all still do
the exact same thing.
Parts Checklist for Classic Phaser Kit
Resistors:
2 - 4k7 (Yellow/Purple/Black/Brown/Brown)
10 - 10k (Brown/Black/Black/Red/Brown)
5 - 22k (Red/Red/Black/Red/Brown)
1 - 56k (Green/Blue/Black/Red/Brown)
6 - 150k (Brown/Green/Black/Orange/Brown)
2 - 470k (Yellow/Purple/Black/Orange/Brown)
1 - 1M (Brown/Black/Black/Yellow/Brown)
1 - 3.9M (Orange/White/Green/Gold)
Visit www.byocelectronics.com/resistorcodes.pdf for more information on how to
differentiate resistors.
Capacitors:
2 - 10n/.01uF film cap (may say “103” on the body)
6 - 47n/.047uF film cap (may say “473” or “47n” on the body)
1 - 10uf Aluminum Electrolytic
1 - 15uf Aluminum Electrolytic
Visit www.byocelectronics.com/capcodes.pdf for more info on how to differentiate
capacitors.
Diodes:
1 - 5.1v Zener diode
IC's:
6 - DIP 8 socket
6 - Single Opamp (TL071, UA741, etc)
Transistor:
4 - 2N5952 or similar JFETs with GSD pinout
1 - 2N3906 or PNP transistor with EBC pinout
Potentiometers: SNAP THE SMALL TABS ON THE TOP OF THE POTS OFF WITH A
PAIR OF NEEDLE NOSE PLIERS
1 - C500k
1 - 250k Trimpot
Hardware:
1 - predrilled enclosure w/ 4 screws
1 - Classic Phaser circuit board
1 - 3pdt footswitch
1 - Knob
1 - AC adapter jack
1 - ¼”stereo jack
1 - ¼” mono jack
1 - battery snap
1 - red LED
4 - rubber bumpers
2 - lock washers (for in and out jacks)
hook-up wire
Populating the Circuit Board
Step 1: Add all the resistors. Resistors are not polarized and can be inserted in either
direction.
Note: Leave out the 22k resistor highlighted in yellow for ‘script logo’ specs, add it
for the later ‘block logo’ specs.
Step 2: Add the diode. Be sure to match the end of the diode with the stripe to
the layout on the PCB. The striped end should go in the square solder pad.
Step 3:Add 4 pin IC sockets. ONLY SOLDER THE SOCKET! NOT
THE ACTUAL IC! This is a socket. The sockets get soldered to the PCB.
The ICs get inserted into the sockets. The actual IC chip itself, never gets
soldered. You will insert the IC into the socket after the entire pedal has
been built.
Step 4: Add the transistors. Orient them so that the flat side matches up with the flat side
on the PCB layout. The transistor highlighted in yellow is the PNP transistor. The
transistors highlighted in red are the JFETs
Inhaltsverzeichnis
Andere BYOC Musikpedal Handbücher
BYOC
BYOC MK2 Bedienungsanleitung
BYOC
BYOC Mega Chorus & Vibrato Kit Bedienungsanleitung
BYOC
BYOC Overdrive 2 Handbuch
BYOC
BYOC Analog Chorus Rev 1.1 Bedienungsanleitung
BYOC
BYOC Reverb Bedienungsanleitung
BYOC
BYOC Ultimate Fuzz Kit Bedienungsanleitung
BYOC
BYOC ESV Fuzz Silicon Bedienungsanleitung
BYOC
BYOC Yellow Overdrive Bedienungsanleitung
BYOC
BYOC Tremolo Bedienungsanleitung
BYOC
BYOC Optical Compressor Bedienungsanleitung
BYOC
BYOC Soaring Skillet Bedienungsanleitung
BYOC
BYOC Large Beaver Ram's Head Bedienungsanleitung
BYOC
BYOC Analog Chorus Bedienungsanleitung
BYOC
BYOC Orange Distortion Handbuch
BYOC
BYOC Analog Vibrato Handbuch
BYOC
BYOC Bass Overdrive Handbuch
BYOC
BYOC Analog Delay Kit Bedienungsanleitung
BYOC
BYOC Silver Pony Handbuch
BYOC
BYOC 250+ Bedienungsanleitung
BYOC
BYOC Li'l Analog Chorus Kit Bedienungsanleitung
Beliebte Musikpedal Handbücher anderer Marken
Matthews Effects
Matthews Effects Whaler V2 Bedienungsanleitung
Grid 1
Grid 1 Pedal Jeanie Bedienungsanleitung
Amptweaker
Amptweaker tightboost Bedienungsanleitung
Ibanez
Ibanez TS-808 Tube Screamer Overdrive Pro Bedienungsanleitung
PuzzleSounds
PuzzleSounds DR. Q ENVELOPE FILTER Bedienungsanleitung
Dimavery
Dimavery EPVP-50 Bedienungsanleitung
