C & K Systems 236E Bedienungsanleitung
Part Number 5-051-503-00 Rev A
12
54
78
3
6
9
0
#
PANIC
P
A
G
E
2
Thank you for purchasing this C&K alarm system. Your system is one of the most powerful and
advanced alarm systems on the market today, designed to provide you with years of reliable
operation.
This manual explains how to operate your alarm system. Basic operating instructions are also
printed on the label inside your keypad(s) door.
If you have any questions or need help with
your alarm system, call:
______________________________________
______________________________________
(Alarm Company Name)
If you have monitoring questions or in cases of
accidental alarms, call:
______________________________________
______________________________________
(Monitoring Station Name)
When calling the monitoring company, know the following:
My Account Number is: ______________________ My Password is: ____________________
3
Table of contents
Getting acquainted ............................................... 4 - 5
What the lights mean ........................................... 6 - 7
What the sounds mean ........................................ 8 - 9
Arming the system............................................ 10 - 17
Bypassing zones ........................................ 15 - 16
Arming types ..................................................... 17
Disarming the system.............................................. 19
After an alarm .......................................................... 19
Options .............................................................. 20 - 26
Changing a PIN .......................................... 22 - 23
Deleting a PIN ................................................... 23
Resetting smoke detectors .............................. 24
Door chime / Keypad tones ...................... 25 - 26
Testing your system ......................................... 27 - 28
Telephone trouble ................................................... 29
Smoke detector placement .................................... 30
Emergency evacuation ........................................... 31
Definitions ................................................................ 32
Limitations of your alarm system ........................... 33
Keypad operations ........................................... 34 - 36
Test procedure index .............................................. 37
Zone description list................................................ 38
FCC Notice............................................................... 39
Industry Canada ...................................................... 40
4
What your alarm system is...
Your alarm system is made up of a control panel and several detection devices like motion sensors,
magnetic contacts, and so on. Specific areas of detection are called zones. Zones can be programmed to
have different characteristics. Some zones may be 24-hour zones, that is, they remain armed even when
the alarm system is off. Zones used for fire detection, for example, are always 24-hour zones. In addition,
some zones can be programmed to allow bypassing. When you bypass a zone, you temporarily remove it
from the alarm system. Always remember, however, that bypassed zones are not protected.
How your alarm system works...
When a detection device is triggered, the status of its zone goes from normal to FAULTED. If armed, the
control panel responds by reporting an alarm condition on site --- flashing keypad lights, sounding bells -
-- and if programmed, by transmitting an alarm signal over the telephone wires to a central monitoring
station. The monitoring station then dispatches the appropriate authorities.
Some of your system's operations require you to enter your personal identification number (PIN) on the
keypad. These include ARMING and DISARMING.
Along with its many other features, your system can be programmed to ARM INSTANTLY or to ARM WITH
TIME DELAY (i.e., allowing you time to leave the premises). The ENTRY TIME DELAY allows you time upon
entering the premises to enter your code and disarm the system without causing an alarm.
5
Each alarm system in the 2300 family is designed to meet the specific needs of a variety of applications. The System
236E is designed for applications requiring protection of six zones.
Some of the available features of your alarm system are also optional, and will only be installed if appropriate for your
installation. In addition, some system features will require you to enter your personal identification number (PIN).
As you read through this manual, watch for boxes like these:
If an optional feature has been installed in your system, its
OPTION INSTALLED box will be checked.
.
.If a feature of your system requires you to enter your personal
identification number, its PIN REQUIRED box will be checked.
OPTION
INSTALLED PIN
REQUIRED
6
ON OFF FLASHING
AC power is being
supplied Battery is low; call your
service department
AC power failure -
system is using battery
...
System is armed -
protection is on System is not armed -
protection is off System is armed with
delay zones converted to
instant zones
..
.
POWER
ARM
Normal state; zone is not
faulted
.
ZONES Zone is faulted while
system is disarmed
.FLASHING SLOW -
Zone is bypassed
Zone is in trouble
.
.
FLASHING FAST -
Zone is or was in alarm
.
7
ON OFF FLASHING
Bell fuse failed
.FLASHING SLOW -
Watchdog reset
Normal state
..
.
SERVICE
POWER,
ARM, and
SERVICE
FLASHING SLOW -
FLASHING FAST -
Failed to communicate
.
.The POWER, ARM, and
SERVICE lights simultane-
ously flash (slowly) when
in the programming mode.
Zone is in trouble (when
accompanied by slow
flashing zone light)
8
SOUND MEANING
2 beeps (confirmation tones) system armed or disarmed
.
successful central station test or battery test
.
pulsed tone (2 seconds on, 2 seconds off) zone programmed for pulsed bell or siren is in alarm
.
continuous tone zone programmed for steady bell or siren is in alarm
circuit malfunction (trouble on supervised loops only)
.
.
.
5 beeps (error tones) invalid function
unauthorized command attempted
error changing PIN number
wrong PIN number entered
.
.
.
zone programmed for chirping bell or siren is in alarm
.
chirping (1 second on, 4 seconds off)
zone faulted during walk-test
.
2 second beep door chime
.
continuous beeping, speeding up for last ten seconds exit delay time
.
.
continuous tone, beeping fast for last ten seconds entry delay time
9
SOUND MEANING
3 pulse temporal pattern (½ second on / ½ second off / ½
second on / ½ second off / ½ second on / 1½ second off -
repeating) *
zone programmed for 3 pulse temporal pattern is in alarm (This is
the audible signal which UL has designated for fire-protection
zones.)
.
.
trouble chirp (2 second chirp once every minute) * low battery conditon has been detected (this will be accompanied
by the Service light on steady and the Power light flashing slowly, as
described on page 6.)
* Only used with System 236E or later control panels.
10
Make sure all the ZONE lights are off.
Faulted zones must be cleared or bypassed before the system can be armed. For more
information, refer to the sections Bypassing Zones and After An Alarm Occurs.
TO ARM THE SYSTEM / AUTO HOME ARMING:
.
If programmed, the red ZONE lights will automatically turn off after five minutes (as a
security measure). Pressing any key on the keypad will turn the ZONE lights back on.
.
OPTION
INSTALLED
Your PIN number is four digits long.
Don't pause for more than 5 seconds while entering the digits or the control panel will
reject your PIN number.
Enter your PIN and push the # key.
.
.
PIN
REQUIRED
If you make a mistake while entering your PIN number, the keypad will beep five times.
After the fifth beep, enter your PIN number again.
.
Make sure the red ARM light comes on.
The keypad will beep twice to confirm that the system is armed.
.
Andere Handbücher für 236E
1
Inhaltsverzeichnis
Andere C & K Systems Sicherheitssystem Handbücher
C & K Systems
C & K Systems SpreadNet SN962-PENDANT Bedienungsanleitung
C & K Systems
C & K Systems 236E Bedienungsanleitung
C & K Systems
C & K Systems Securit 703 Bedienungsanleitung
C & K Systems
C & K Systems SECURIT ST800L+ Bedienungsanleitung
C & K Systems
C & K Systems 236I3AU Bedienungsanleitung
C & K Systems
C & K Systems Sierra S5030 Bedienungsanleitung
C & K Systems
C & K Systems System 238 Bedienungsanleitung
C & K Systems
C & K Systems System 236i Bedienungsanleitung
C & K Systems
C & K Systems Sierra Bedienungsanleitung
C & K Systems
C & K Systems 236i/L Bedienungsanleitung
Beliebte Sicherheitssystem Handbücher anderer Marken
EDM
EDM Solution 6+6 Wireless-AE Bedienungsanleitung
Highway Safety Group
Highway Safety Group EA401 Bedienungsanleitung
Siren
Siren LED GSM Bedienungsanleitung
Detection Systems
Detection Systems 7090i Montageanleitung
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung
Siemens
Siemens FDM273 Bedienungsanleitung