5
9. Programming
9.1 Add and delete users by admin cards
It is highly advised to make a note of the User ID number and card number to allow for individual deletion of cards
in the future, see the last page.
Add users
Read admin add card Read 1st user card Read 2nd user card … Read admin add card
Note: The admin add card is used to add cards continuously and quickly. When you read the admin add card for the first time
you will hear 2 short beeps and the indicator light will turn yellow, this means you have entered programming mode. When you
read the admin add card the second time, you will hear one long beep and the indicator light will turn red, meaning you have
exited programming mode.
Delete users
Read admin delete card Read 1st user card Read 2nd user card … Read admin delete card
Note: The admin delete card is used to delete cards continuously and quickly. When you read the admin delete card for the first
time you will hear 2 short beeps and the indicator light will turn yellow, this means you have entered programming mode. When
you read the admin delete card the second time, you will hear one long beep and the indicator light will turn red, meaning you
have exited programming mode.
9.2 Add and delete users by remote control
To enter programming mode
*Admin code #
999999 is default admin code
*Must be pressed after completing programming
Note that to undertake the following programming the administrator must be logged in
To add a card user (Method 1)
User ID number is automatically generated.
1Read card #
Cards can be added continuously without exiting programming mode
To add a card user (Method 2)
In this method a user ID number is allocated to a
card. User ID number is any number between 1 &
10,000. Only one user ID number per card.
1User ID number #Read card #
Cards can be added continuously without exiting programming mode
To add a card user (Method 3)
In this method the card is added by the 8 or 10
digit card number printed on the card. User ID
number is auto generated.
1Card number #
Cards can be added continuously without exiting programming mode
To add a card user (Method 4)
In this method a user ID number is allocated to a
card number. Only one user ID number per card.
1User ID number #Card number #
Cards can be added continuously without exiting programming mode
To add sequential card numbers
7User ID number #First Card number #Card quantity #
To delete a card user by card
2Read card #
Cards can be deleted continuously without exiting programming mode
To delete a card user by user ID number
This option can be used when someone has lost
their card
2User ID number #
Cards can be deleted continuously without exiting programming mode
To delete a card user by card number
This option can be used when someone has lost
their card
2Card number #
Cards can be deleted continuously without exiting programming mode
