Cable matters 103078 Bedienungsanleitung

www.cablematters.com

HDBaseT HDMI Extender

over Single Cat 6 up to 330 Feet

Model 103078

User Manual

 Supports 100BaseT Uncompressed

Video and Surround Sound Audio

Table of Contents

1. INTRODUCTION........................................................... 1

1.1 Introduction

1.2 Copyright and Trademarks

1.3 FCC Compliance Statement

2. PRODUCT OVERVIEW

2.1 Package Contents

2.2 Product Description ............................................................ 2

2.3 Product Features

3. CONNECTION AND OPERATION

3.1 Installation Checklist ........................................................... 3

3.2 Front Panel Connections - Transmitter

3.3 Rear Panel Connections - Transmitter............................... 4

3.4 Front Panel Connections - Receiver

3.5 Rear Panel Connections - Receiver................................... 5

3.6 IR Cable Installation............................................................ 6

3.7 Extender Connection Instructions ...................................... 7

3.8 Troubleshooting Notes ....................................................... 8

4. TECHNICAL SPECIFICATIONS .................................. 9

5. WARRANTY AND SUPPORT .................................... 10

5.1 Customer Support and Contact Information

5.2 Warranty Information

5.3 Limitations of Liability

HDBaseT HDMI Extender

www.cablematters.com

HDBaseT HDMI Extender

1. Introduction

1.1 Introduction

Thank you for your purchase from Cable Matters® Inc., the ‘Reliable Connectivity’ company. This

User Manual provides an overview of the features and installation of your new

HDBaseT HDMI Extender over Single Cat 6 Cable up to 330 Feet

Please read these instructions carefully before connecting, operating or configuring this product.

Please keep this manual for future reference.

Contact [email protected] for questions or product support.

1.2 Copyright and Trademarks

Specifications are subject to change without notice. Cable Matters is a registered trademark or

respective owners.

1.3 FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules.

2. PRODUCT OVERVIEW

2.1 Package Contents

Please check that the following items are contained in the package:

1 x HDMI Extender Transmitter

1 x HDMI Extender Receiver

2 x AC Power Adapter

2 x HDMI Cables

4 x IR Cables

4 x Mounting Brackets with screws

1 x User Manual (available as a PDF from Cable Matters)

NOTE: Two HMDI cables are included. Additional cables are sold separately.

www.cablematters.com

HDBaseT HDMI Extender

2.2 Product Description

The Cable Matters® HDBaseT HDMI Extender over Cat 6 connects

devices with HDMI up to 330 Feet. One cable transmits video, audio,

Ethernet, and control signals using HDBaseT technology.

2.3 Product Features

 Connect devices with HDMI up to 330 feet apart over a Cat 6 cable

 Video resolution support for 4K UHD up to 230 feet

 Supports video over Cat 5e up to 150 feet

 Supports HDBaseT uncompressed video technology

 Plug & Play installation with no drivers required

 Dolby Digital, DTS, Dolby TrueHD, and DTS HD-Master Audio Support

 Bi-directional IR Control with the included RX and TX cables

 Bi-directional RS-232 support to connect a PC for control

 Bi-directional Ethernet to connect a router to a PC or smart device

 HDCP compliant with HDCP compatible equipment

 Surface mountable with included brackets and hardware

 Rugged metal housing with side cooling air vents

 Includes 2-Pack of 4K rated HDMI cables

www.cablematters.com

HDBaseT HDMI Extender

3. CONNECTION AND OPERATION

3.1 Installation Checklist

Please review these steps before installing the HDMI Extender

 Power-off the source and display equipment before connecting

 Extenders must be located within 3.7 feet of an electrical outlet

 Recommend max total distance for HDMI cables (in/out) is 20 feet

 4K displays require 4K rated HDMI cables in the shortest length needed

 Use high quality 22-28 AWG HDMI cables for the best performance

 Unshielded cable is appropriate for shorter lengths in a low EMI area

 Shielded cable is appropriate for longer lengths in a high EMI area

 CATV STB or A/V receivers with HDMI 1.2 may block the signal

 IR TX & RX cables must have line of sight with source and remote

 Test the Extender and cabling before installing in a permanent location

3.2 Front Panel Connections - Transmitter

1) HDMI IN: Connect the HMDI input video source cable

2) IR RX/TX: Connect the IR Receiver and Transmitter cables to RX

and the TX ports (optional)

3) Ethernet: Connect an RJ45 patch cable to a router to provide

internet access. LEDs: Status=green and Data Transfer=yellow

www.cablematters.com

HDBaseT HDMI Extender

3.3 Rear Panel Connections - Transmitter

1) RS232: Female DB-9 serial port connects an RS-232 controller

2) Link: Connect a Cat 6 cable with 568B wiring. Green LED Link status

indicator verifies a live connection

3) DC/5V: AC power adapter port. Red LED confirms power.

3.4 Front Panel Connections - Receiver

1) HDMI OUT: Connect the HMDI output display cable

2) IR RX/TX: Connect the IR Receiver and Transmitter cables to RX and

the TX ports (optional)

3) Ethernet: Connect an RJ45 patch cable to a router to receive internet

access. LEDs: Status=green and Data Transfer=yellow

www.cablematters.com

HDBaseT HDMI Extender

3.5 Rear Panel Connections - Receiver

1) RS232: Male DB-9 serial port connects an RS-232 device

2) Link: Connect a Cat 6 cable with 568B wiring. Green LED Link status

indicator verifies a live connection

3) DC/5V: AC power adapter port. Red LED confirms power.

See Section 3.7 for

Extender connection

instructions

www.cablematters.com

HDBaseT HDMI Extender

3.6 IR Cable Installation

HDMI Extender transmits bi-directional IR control signals over a Cat 6

cable using HDBaseT technology. Control both the HDMI input source

and output display with a paired handheld remote for either side.

1) Connect an IR Transmitter cable to the Transmitter TX port

 It must have line of sight with the remote for the Output display

2) Connect an IR Receiver cable to Transmitter RX port

 It must have line of sight to the source HDMI Input IR sensor

3) Connect an IR Transmitter cable to the Receiver TX port

 It must have line of sight with the remote for the Input source

4) Connect an IR Receiver cable to the Receiver RX port

 It must have line of sight to the source HDMI Output IR sensor

www.cablematters.com

HDBaseT HDMI Extender

3.7 Extender Connection Instructions

1) Power off all the equipment before connecting any cables

2) Connect the HDMI cables to the Transmitter and Receiver boxes

3) Connect the Cat 6 cabling to the Transmitter and Receiver boxes

4) Connect the IR RX and TX cables (optional)

5) Connect the RS-232 cables (optional)

6) Power on all the equipment

7) Select the input source from the display menu

8) Connect the AC power adapters to the Extender boxes

9) Check that the red power LED is lit

10) Check that the green Link LED is lit

11) Check the Ethernet status indicators if a router is connected

Note: Test the Extender boxes and connections before installing in a

permanent location or mounting with the included brackets.

www.cablematters.com

HDBaseT HDMI Extender

3.8 Troubleshooting Notes

 Verify that the Extender and all connected equipment have power. The red power

LED indicator should be lit on the Extender.

 Verify that all cables are connected to the correct input and output ports.

 Verify that the correct input source is selected from the display menu. Check the

green LED indicators on the front panels of the Extender boxes.

 All connected equipment must support HDCP. Set-top CATV boxes or A/V

receivers with HDMI 1.2 may not function with this HDBaseT Extender.

 Directly connect the video source to the output display to test for compatibility.

 Check the audio output settings from the source input device.

 Test each HDMI cable by connecting it with other equipment.

 Test the Cat 6 cable with a cable tester. It must be terminated using the 568B

wiring standard.

 High resolution 4K displays may require a heavy gauge AWG 22-24 or RedMere

HDMI cable for cables over 10 feet.

 Place the Extender boxes away from fluorescent lighting or equipment that

generates electrical noise.

 A ‘Not Supported’ error message may indicated that the connected equipment

does not support HDCP (or more than 2 outputs) for content protected video.

 Check that the IR sensor on the input source or output display is not blocked

(check the user manual of your equipment for the exact location).

 Reboot the video source and output displays after making changes.

Contact support@cablematters.com with any questions.

Inhaltsverzeichnis

Andere cable matters Extender Handbücher

cable matters

cable matters 103002R Bedienungsanleitung

cable matters

cable matters 103093 Bedienungsanleitung

cable matters

cable matters 103004 Bedienungsanleitung

cable matters

cable matters 103082 Bedienungsanleitung

cable matters

cable matters 103091 Bedienungsanleitung

cable matters

cable matters 103095 Bedienungsanleitung

cable matters

cable matters 103079 Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung

cable matters 103078 Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken