Introduction
Thank you for choosing the CalDigit SuperShare, please use the following quick installation
instructions to setup your SuperShare Switch & Hub.
General Use Warnings
Please read the SuperShare manual thoroughly and become familiar with the product
before use.
Only use the CalDigit SuperShare in an area with cool ventilation. Make sure that the fans
are not obstructed to ensure heat dissipation. Do not leave or use the SuperShare near a
heat source such as a heater or direct sunlight.
Avoid using the SuperShare in extremely hot and cold environments as it will increase
the likelihood of premature failure. A safe temperature range is between 40F – 95F.
Avoid using the SuperShare in humid environments. Moisture and condensation can
accumulate and damage the electrical components, resulting in unit failure.
Only use the power adapter that has been supplied with the CalDigit SuperShare. An
excessive or inadequate power supply can result in unstable performance or failure.
Safety Warnings
Keep SuperShare away from liquids and moisture. Direct application of liquids on
SuperShare can result in electric shock, re hazard and damage the unit. If your
SuperShare gets wet while it is still o, do not turn it on.
Do not tamper with or try to repair SuperShare unless you are a certied CalDigit
technician. Doing so can result in personal injury and damage SuperShare. This will also
void your warranty. If you have any issues, contact CalDigit Technical Support.
04
