CallToU CC28 Bedienungsanleitung
Caregiver Pager System
User Manual
Receiver model ：CC28
Transmitter model ：BT009
A Good Life in Old Age
Monitoring and Improving Quality in Long-term Care
As a growing number of frail old people in need of home care,
delivering quality long-term care services, which are effective and
responsive in time, has become a priority for every family.
"Call to You" is determined to provide perfect solutions that enable
your loved ones to retain their independence and dignity in daily
life, so they can live on their own and release your burden with
peace of mind.
We "CallToU" fucus on professional home caregiver pagers for
more than a decade, and have helped and cared for millions of
ELDERLY and those in need to help timely.
"Call to you" gives more care for the elderly
You Need, We Here!
For FAQs and more information, please visit:
www.calltou.com
service01@calltou.com
CallToU Brand Product Introduce
Anywhere in The Home
Connected Care
Deliver users' help signal to their family or caregivers
Product diagram
-1-
Loudspeaker
Ringtone Switch
LED Display
Setting
Volume
ON/OFF
Receiver
Push area
Light
indicator
Back clip
Transmitter
Transmitter low
battery light indicator
Receiver low battery
light indicator
Landyard
hanger
1、ON/OFF
①Power on: Hold for 5 second, receiver will beep with number
”00” on the display
②Power on: Hold for 5 second, receiver will beep with number
”--” on the display.
3、Ringtone switch
Push to switch from 2 ringtones, “Ding-dong” and Alarm sound
When triggered, will ring for 90 second before it stops, or you can
press any key on the receiver to stop ringing.
2、Adjust the volume
Press once to adjust the volume (default from level 1). There are
5 levels from 0-120dB.
Note: When power off, all setting will remain the same for the
Memory Function.
Feature
-2-
4、Vibration
When triggered, the receiver will vibrate 10 times, and stop for 3
seconds, lasting 90 seconds before it stops, or you can press any
key on the receiver to stop it.Press and hold "Volume" and "On/OFF"
buttons simultaneously until the sound stops to turn the vibration
function off or on.
5、Low battery warning
When voltage is low, the receiver will flash red or blue. Red means
the receiver needs battery changing, and the Blue light means the
transmitter need battery changing.
Hold Setting button for 5 seconds,
and there will be a “Ding”, meaning
it’s under pairing mode.
Choose a number for the transmitter
by pressing / (forward/backward)
The number you choose will display
on the screen.
Step 1
Step 2
-3-
① How To Use?（Paired Before Delivery）
1.Firstly, put the batteries in the
receiver.
2.Hold for 5 seconds to turn on
the receiver, and you will have
00 on the display screen.
②How To Pair?（Paired Before Delivery）
Operating Instructions
Press the transmitter once to pair with
receiver. If the pairing is successful, there
will be a“DingDing”from receiver, the
number appears on the display screen.
Step 3
-4-
※Pair to more transmitter/ receivers
If you want to pair more transmitter/ receivers, just repeat
step 1-3 one by one.
One receiver can work with 20 transmitters. One transmitter
can pair to one number on the receiver.
Operating Instructions
③Clearing All Settings
Hold Volume button for 5 seconds
to reset receiver to default mode.
The receiver will ding with number
“01” on the screen, meaning
clearing is done. If you want to pair
the them again, just repeat step 1-3
one by one.
-5-
Battery Replacement
1. Push the Backclip down.
2. You need a screw driver to remove
the cover.
3.Replace 3AAA batteries in the slot,
pain attention to the right terminal
ends. Then put the cover back and
secure with the screws.
Receiver
Transmitter
1.You need a screw driver to remove the cover from the back.
2.Replace 12v23A batteries in the slot, pain attention to the
right terminal ends. Then put the cover back and secure with
the screws.
-6-
Install
3M
tape
or
1.Fix the transmitter of the button to certain place.
Tape up the back clip with 3M tape, or fix it with screws.
2.Then place the transmitter
on the back clip.
Transmitter lanyard mounting
Remove the
back clip
Slide the tip of
landyard through
landyard hange
Slipping the other
end to tie it up.
How is looks with
Landyard
Specifications
Power 4.5V 12V23A Battery
Receiver
Transmitter
500ft/150m 500ft/150m
Operating Temperature -30℃-70℃/-22℉-158℉
433Mhz 433Mhz
Working Range
Frequency
Waterproof Level IP55N/A
Q&A
Q: Why does the receiver does’t work?
A1:Press volume button to check if receiver works probably. it’s might
be under the mute mode. If it worked, meaning the receiver is ok.
If not, refer to the customer service problem with receiver.
A2:Press transmitter to check if light indicator works probably.
If it worked, meaning the transmitter is ok. If not, try to replay
batteries and check again. If still not working, refer to the customer
service problem with transmitter
A3:If receiver and transmitter are ok, try pairing again by repeating
Step 1-3.
-7-
Andere Handbücher für CC28
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere CallToU Pager Handbücher
Beliebte Pager Handbücher anderer Marken
Motorola
Motorola Talkabout T900 Bedienungsanleitung
Motorola
Motorola Advisor Graphix CP1250 Bedienungsanleitung
Radio Shack
Radio Shack 17-7040 Bedienungsanleitung
PageOne
PageOne Advisor Graphix Bedienungsanleitung
Syscall
Syscall Nttworks GP-210RT Bedienungsanleitung
unication
unication G4 Bedienungsanleitung