CAMBRIDGE COLONIAL Bedienungsanleitung

IMPORTANT

Do not return this product to the store.

Simply call our customer service department for any questions or concerns:

1-800-890-4076

(8:30am - 5:30pm E.S.T.)

DATED PROOF OF PURCHASE REQUIRED FOR WARRANTY SERVICE.

IMPORTANTE

No devuelva este producto a la tienda.

Sólo hay que llamar nuestro departamento de servicio

al cliente en caso de tener preguntas o inquietudes:

1-800-890-4076

(8:30am - 5:30 p.m. E.S.T.E.)

SE REQUIERE PRUEBA DE COMPRA CON FECHA PARA SERVICIO BAJO GARANTÍA.

Due to constant improvements to our products, images may differ slightly from actual product.

Debido a la mejora continua de nuestros productos, las imágenes pueden variar ligeramente

del producto real.

COLONIAL ELECTRIC HEATER

CALENTADOR ELÉCTRICO COLONIAL

SECTION 1: QUICK REFERENCE GUIDE

1.1 Special Characteristics ................................................................................................................................3

1.2 Unpacking and Installing Your Electric Fireplace ........................................................................................3

SECTION 2: WARNINGS & PRECAUTIONS

2.1 Important Safety Instructions...................................................................................................................4-5

2.2 Specifications ..............................................................................................................................................6

2.3 Testing the Unit............................................................................................................................................6

SECTION 3: UNDERSTANDING YOUR ELECTRICAL FIREPLACE

3.1 Parts list .......................................................................................................................................................7

SECTION 4: OPERATING INSTRUCTIONS

4.1 Grounding Instructions ................................................................................................................................8

4.2 Control Panel Operation Procedures .......................................................................................................8-9

SECTION 5: MAINTENANCE

5.1 Cleaning Your Fireplace.............................................................................................................................10

5.2 Cleaning the Front Window Panel.............................................................................................................10

5.3 Replacing Flame Bulbs..............................................................................................................................11

SECTION 6: TROUBLESHOOTING................................................................................................................................12-14

Version 1

TABLE OF CONTENTS

CAUTION: BEFORE OPERATING THIS EQUIPMENT PLEASE READ THESE INSTRUCTIONS CAREFULLY.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

NO USER - SERVICEABLE PARTS INSIDE

HIGH TEMPERATURE

SA 1965A

CAUTION:

HIGH TEMPERATURES!

KEEP DRAPERIES, ELECTRICAL CORDS AND OTHER FURNISHINGS AT LEAST 3’/0.9 M

FROM THE FRONT AND AWAY FROM THE SIDE AND REAR OF THE HEATER.

WARNING:

1. RISK OF FIRE - KEEP COMBUSTIBLE MATERIAL AWAY FROM THE FRONT

OF THE ELECTRICAL FIREPLACE.

2. SERVICING SHOULD BE DONE ONLY WHILE THE ELECTRICAL FIREPLACE IS DISCONNECTED

FROM THE POWER SUPPLY.

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE

1. Before permanently setting up your fireplace, make sure to plug it into a convenient outlet and verify

the circuit breakers operate correctly.

2. The electric fireplace may emit a slight, harmless odor when first used. This odor is normal and is caused

by the initial heating of internal fireplace parts. This odor occurs only at the time of set-up.

3. If your electrical fireplace does not emit heat, consult the User Manual for further information.

•Open the packaging carefully and remove the fireplace.

•Remove and discard the plastic bag.

•BE RESPONSIBLE WHEN HANDLING THE PACKING MATERIALS.

•WARNING: KEEP PLASTIC WRAPPING AWAY FROM CHILDREN.

•Keep the original packaging for future transport and/or storage.

•Keep the front of the unit, through which the heat is radiated, at least 3’/0.9 m away from furniture,

curtains and other flammable objects/materials at all times.

Ensure there is a grounded socket nearby (back of the appliance).

NOTE:

A dedicated power circuit is recommended for the unit but not required. Additional electrical appliances on the same

circuit may exceed the current (amperage) rating for that circuit. If after the installation of your unit, the circuit breaker trips

or the fuse fails on a repeated basis, then a dedicated circuit will likely be required.

Any new wiring must be done in compliance with local and national codes and other applicable regulations in order

to reduce the risk of fire, electric shock or other injuries. It is strongly recommended that you hire a licensed electrician

to complete any such work.

SECTION 1 QUICK REFERENCE GUIDE

1.2 UNPACKING AND INSTALLING THE ELECTRIC FIREPLACE

1.1 SPECIAL CHARACTERISTICS

A) The smoldering glow of the flames are similar those observed in a real fireplace.

This heater is ideal for year round use even when the central heating has been turned off.

B) This fireplace produces a hot air current.

This symbol alerts you to otential hazards that can kill or hurt you and/or others.

DANGER

WARNING

You can be killed or seriously injured if you donʼt immediately follow these instructions.

All safety messages will tell you w at t e potential azard is, tell you ow to reduce t e c ance of injury,

and tell you w at can appen if t e instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

Your Cambridge Electric Fireplace is classified as a moveable heater. As with any electrical appliance and particularly

with electric heaters, basic precautions must be followed in order to reduce the risk of fire, burns, electrical shocks

and/or other serious injuries or death.

1. Read all the instructions in your User’s Manual before using this unit.

Warning: Any other use not recommended or described in your User’s Manual may cause fire, burns,

electric shock and other serious injuries or death.

2. The unit can become hot when in use. To avoid accidental burns, do not allow bare skin to come into contact

with the hot surfaces of the unit. Extreme caution is necessary when any heater is used by or near children or invalids

and whenever the heater is left operating and unattended.

3. Keep combustible materials, such as: curtains, drapes, furniture, pillows, clothing, linens, bedding, paper, etc.,

at least 3’/0.9 m from the front and away from side and rear of the heater. Do not use this unit in areas where gasoline,

paint or other flammable liquids or their associated vapors may be present.

4. Do not use this unit for drying any wet objects, such as clothes, toys, etc.

5. Always unplug heater when not in use.

6. Do not use outdoors.

7. Do not operate the unit if it is damaged or has malfunctioned. If you suspect the unit is damaged, please call customer

service at 1-800-890-4076 before returning this unit to the store.

8. This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. Never locate heater

where it may fall into a bathtub or other water container.

9. To reduce the risk of fire, do not place or install this unit in areas where the ventilation or circulation ducts may become

blocked. Make sure there are at least 4”/10.15 cm of space between the back of your fireplace and the wall.

Keep a minimum distance of 2”/5.08 cm on each side of your fireplace free.

WARNINGS & PRECAUTI NS SECTI N 2

2.1 IMP RTANT SAFETY INSTRUCTI NS

Warning: When using this product, basic precautions should always be taken,

including the following:

10. Do not ins rt or allow for ign obj cts to nt r any of th v ntilation or circulation ducts as this may caus

l ctric shock, fir or oth rwis damag th unit.

11. Th unit’s pow r cord must b conn ct d to a prop rly ground d and prot ct d, 120 V l ctrical outl t.

Always us ground fault prot ction wh r r quir d by th l ctrical cod . To r duc th risk of fir , do not run cord

und r carp ting. Do not rout th xc ss pow r cord in front of th hot air outl t of th h at r, inst ad rout it b hind

th fir plac . Do not cov r cord with throw rugs, runn rs, or similar cov rings. Arrang cord away from traffic ar a

and wh r it will not b tripp d ov r.

12. Avoid th us of an xt nsion cord, which may ov rh at and caus a fir . Always plug h at rs dir ctly into a wall

outl t/r c ptacl . N v r us with an xt nsion cord or r locatabl pow r tap (outl t/pow r strip).

13. Always disconn ct th unit from th pow r supply b for p rforming any cl aning, maint nanc , r locating th l ctric

fir plac or wh n th unit is not in us for long p riods of tim .

14. Wh n transporting or storing th unit, k p it in a dry location, fr from dust, xc ssiv vibration or oth r factors,

which may damag th unit.

15. Do not op rat any h at r with a damag d cord or plug or aft r th h at r malfunctions, has b n dropp d

or damag d in any mann r. R turn h at r to authoriz d s rvic facility for xamination, l ctrical or m chanical

adjustm nt, or r pair.

16. To disconn ct h at r, turn controls to off, th n r mov plug from outl t.

17. To pr v nt a possibl fir , do not block air inl ts or xhaust in any mann r. Do not us on soft surfac s,

lik a b d, wh r op nings may b com block d.

18. A h at r has hot and sparking parts insid . Do not us it in ar as wh r gasolin , paint, or flammabl liquids

ar us d or stor d.

19. Us this h at r only as d scrib d in this manual. Any oth r us not r comm nd d by th manufactur r may caus fir ,

l ctric shock, or injury to p rsons.

Warning: This applianc is not int nd d for us by p rsons (including childr n) with r duc d physical,

s nsory or m ntal capabiliti s, or lack of xp ri nc and knowl dg , unl ss th y hav b n giv n sup rvision

or instruction conc rning us of th applianc by-a p rson r sponsibl for th ir saf ty.

Warning: Childr n should b sup rvis d to nsur that th y do not play with th applianc .

Warning: If th supply cord is damag d, it must b r plac d by th manufactur r or its s rvic ag nt

or a similarly qualifi d p rson in ord r to avoid a hazard.

SAVE THESE INSTRUCTIONS

SECTION 2 WARNINGS & PRECAUTIONS

2.1 IMPORTANT SAFETY INSTRUCTIONS (CONTINUED)

TECHNICAL SPECIFICATIONS

ITEM (MODEL) 16496 (HBL-15SDB /M40)

VOLTAGE 120V AC

FREQUENCY 60 Hz

OWER 1500 W

NET WEIGHT 20 kg / 44 lbs

UNIT DIMENSIONS 23.23” L x 14.13” W x 25.59” H

59 cm L x 35.9 cm W x 65 cm H

2.3 TESTING THE UNIT

Carefully remove the unit from the box. Prior to permanently installing the unit, test to make sure the unit operates properly

by plugging the unit’s power cord into a conveniently located 120 V grounded outlet.

Refer to the Operating Instructions regarding the various controls and features of the unit.

WARNINGS & PRECAUTI NS SECTI N 2

CAUTI N:

The unit’s power cord must be connected to a properly grounded and protected 120 V outlet.

Always use ground fault protection where required by the electrical code.

WARNING:

Do not operate the unit if it is damaged or has malfunctioned. If you suspect the unit is damaged,

please call customer service at 1-800-890-4076 before returning this unit to the store.

2.2 SPECIFICATI NS

SECTI N 3 UNDERSTANDING Y UR ELECTRICAL FIREPLACE

3.1 PARTS LIST

Top plate

Door with

transparent

window

Foot

Hot air

outlet

Handle

Back plate

Room air inlet

Control panel

Fig. 2

Fig. 1

Fig. 3

Pilot light

2 spare replacement

bulbs stored in the

packaging foam

TEMPERATURE

CONTROL

FLAME

POWER

HEATER

POWER

This fireplace is for use on 120 V outlets. The cord has a 3-prong plug (See Figure 4-A). An adapter is available

for connecting 3-prong grounded-type plugs to two-slot receptacles (See Figure 4-C). The green grounding

plug extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box.

The adapter should not be used if a three-slot grounded receptacle is not available.

Figure 4

Grounding Pin

Grounding Means

Cover of Grounded

Outlet Box

Metal Screw

A B C

Once the unit has been properly connected to a grounded electrical outlet, it is ready to operate.

Note: Make sure the circuit breakers for the power supply are turned on.

• Pilot Light for Heater: Pilot light goes on when heater is in use.

Note: The Flame and Heating system are controlled by separate power switches and can work independent

from each other. The Flame system can be on while the Heating element is off and the Heating element

can be on while the Flame system is off. We suggest that you should turn the Flame system and Heating system

on at the same time when you turn on the electrical fireplace.

Figure 5

Temperature

Control Knob

Flame Adjust Knob

Power Switc

Heater Low Switc

Heater Hig Switc

Flame Power Switc

SECTI N 4 PERATING INSTRUCTI NS

4.1 GR UNDING INSTRUCTI NS

4.2 C NTR L PANEL PERATING PR CEDURES

FLAME

TEMPERATURE

CONTROL

Fig. 6

Fig. 7

Flame peration:

1. To switch on the flame, flip the POWER rocker switch on. The red LED light

turns on.

2. To switch on the flame effect of your fireplace, flip the POWER rocker switch

to on. The flame goes on when the red LED light on the switch turns on.

3. To adjust the brightness of the flame, turn the right-hand dial marked FLAME,

clockwise until it reaches the brightness you desire

Heater peration:

1. To switch on the heater, flip the POWER rocker switch on.

The red LED light turns on

2. Flip the second rocker switch from the left, marked Heater I.

This switch gives you approximately 675 W of power to your heater.

This switch is for low-level heating. For high-level heating, make sure

the POWER, HEATER I and HEATER II switches are all turned on.

3. To adjust the temperature, turn the left-hand dial marked

TEMPERATURE CONTROL clockwise, until it reaches the temperature you desire.

PERATING INSTRUCTI NS SECTI N 4

4.2 C NTR L PANEL PERATING PR CEDURES (C NTINUED)

Inhaltsverzeichnis

Sprachen:

Andere CAMBRIDGE Elektrische Heizung Handbücher

CAMBRIDGE

CAMBRIDGE 16716 Bedienungsanleitung

Beliebte Elektrische Heizung Handbücher anderer Marken

Heatscope

Heatscope PURE Kurzanleitung

Sunbeam

Sunbeam Calentador SFH457A Bedienungsanleitung

Dura Heat

Dura Heat DH2000C Bedienungsanleitung

Harvia

Harvia K10.5GS Bedienungsanleitung

Harvia

Harvia GL70 Bedienungsanleitung

Heylo

Heylo DE 2 XL Bedienungsanleitung

Heylo

Heylo DE 20 SH Bedienungsanleitung

Harvia

Harvia PP70SP Bedienungsanleitung

Tylo

Tylo SENSE SPORT Bedienungsanleitung

Dirna

Dirna ecodirna SUN Bedienungsanleitung

Creda

Creda Heating Solution Bedienungsanleitung

THERMEx

THERMEx Frame E Wi-Fi Series Bedienungsanleitung

SHUFT

SHUFT UniMAX-R 1400VE EC Bedienungsanleitung

HUUM

HUUM CLIFF Series Bedienungsanleitung

Harvia

Harvia HL70S Bedienungsanleitung

Dimplex

Dimplex DHEBHT Bedienungsanleitung

Radialight

Radialight SIRIO Bedienungsanleitung

Polaris

Polaris PRE E 0715 H Bedienungsanleitung