CAMBRIONIX ModIT-MAX Bedienungsanleitung
User Manual
ModIT-MAX
ModIT-MAX Page 1 of 17
1.Table of Contents
1.Table of Contents 1
2.Your ModIT-MAX at a glance 2
2.1.Key Features 2
3.Safety 3
3.1.Signal word panel 3
3.2.Safety alert symbol 4
3.3.Pictograms 4
3.4.Product modification 4
3.5.Power supply 5
3.6.Storage and Installation 6
4.Getting Started 7
4.1.What's Included 7
4.2.Connecting to the mains 7
4.3.Registration 7
4.4.Help and Support 7
5.Using your ModIT-MAX 8
5.1.Using without connecting to a host computer 8
5.2.Using when connected to a host computer 8
5.2.1 Charging 8
5.2.2 Data Transfer 8
5.3.Manage Ports & Devices 10
5.3.1 LiveViewer 10
5.3.2 Cambrionix API 10
5.3.3 Command Line Instructions (CLI) 11
5.4.User adjustments 13
5.4.1 Changing the cables 13
5.4.2 Adjusting-the-backstop 13
5.5.Cleaning your ModIT-MAX 14
6.Product Specifications 15
6.1.Input Power 15
6.2.Output Power 15
6.3.Physical specifications 15
7.Compliance and Standards 16
ModIT-MAX Page 2 of 17
2.Your ModIT-MAX at a glance
The ModIT-MAX has been designed to provide high-speed data transfer to USB 3.2 compliant
devices without being constrained by endpoint limits.
The ModIT-MAX can charge attached USB devices without using a local computer. The
intelligent charging algorithm allows almost any device to be charged at its optimum rate (up to
2.4A). The firmware can be up-dated to allow new charging profiles to be added, ensuring the
ModIT-MAX can charge the latest devices. It is ready to charge out-of-the-box and to sync
devices when attached to a host computer.
When a local (host) computer is attached the host can control the operation of each individual
port using software provided by Cambrionix. Device charging and synchronisation can be
monitored through Cambrionix’s LiveViewer App, the Application Programming Interface (API)
or Command Line Interface (CLI). Cambrionix’s free monitoring and control software can be
downloaded from www.cambrionix.com/products/api
2.1.Key Features
Up To
40 Gbps
per Port
Up To
2.4A
per Port
Up To
96
Devices
Transfer Data Seamlessly Power Scalability
Each high speed port can
transfer data up to 40 Gbps
Each port can charge devices up
to 2.4A (12W)
Up to 96 devices can be con-
nected at once using multiple
hubs
ModIT-MAX Page 3 of 17
3.Safety
This user manual is for informational purposes only, it contains information for start-up and
operation of this product. Note: the contents and the product described are subject to change
without notice. To avoid injuries and damage observe the safety instructions of the user
manual.
Understanding and observing the instructions in this user manual are prerequisites for
hazard-free use and safety during operation. This user manual cannot cover all conceivable
applications. If you would like additional information or if problems arise that are not
sufficiently addressed in this manual please ask your distributor or contact us directly using the
means preferred which are located on the back cover of this manual.
Personal Injury and Damage to the product
lObserve the safety instructions in this user manual
3.1.Signal word panel
Depending on the probability of serious consequences, potential dangers are identified with a
signal word, the corresponding safety colour, and if appropriate, the safety alert symbol.
Indicates a potentially hazardous situation which, if not avoided, may result in moderate or
minor (reversible) injury.
Indicates a potentially hazardous situation which, if not avoided, may result in damage to the
product and/ or its functions or of a property in its proximity.
ModIT-MAX Page 4 of 17
3.2.Safety alert symbol
Use of the safety alert symbol indicates a risk of injury.
Observe all measures that are marked with the safety alert symbol in order to
avoid injury
3.3.Pictograms
Warning Signs
Electrical hazard Fire Hazard
Mandatory action signs
Read operating instructions Mandatory regulation
3.4.Product modification
Cambrionix products are designed and manufactured to meet the requirements of UK and
International safety regulations. Modifications to the product could affect safety and render the
product non-compliant to relevant safety standards, which could result in injury or damage to
the product.
Electric shock or personal injury may occur
lDo not modify the product in any way
lDo not dismantle the product
ModIT-MAX Page 5 of 17
Fire or personal injury may occur
lDo not obstruct air vents on the product
lDo not cover the product in combustible material
Damage to your product may occur
lDo not bend or compress any part of the product
3.5.Power supply
This section describes safety precautions you must follow when using the power supply.
Electric shock or personal injury may occur
lDo not use a damaged power cord or plug, or a loose power socket
lDo not touch the power plug with wet hands
lDo not allow liquids to come into contact with the unit or power supply
Damage to your product may occur
lDo not short circuit the Power Supply Unit (PSU) supplied with your
product
lDo not disconnect the power cord while the product is being used
lDo not bend or pull the power cord with excessive force
ModIT-MAX Page 6 of 17
3.6.Storage and Installation
This section describes safety precautions you must follow when installing and storing your
ModIT-MAX.
Electric shock or personal injury may occur
lDo not place the power cord near heat sources
lConnect the plug to an earthed socket
Damage to your Cambrionix product may occur
lOperate the product only in an environment where the ambient
temperature is inside the operating temperature range
lOperate the product only in an environment where the relative humidity is
inside the operating range
lBe careful not to leave the power cord underneath a heavy object
Overheated power sockets may cause a fire
lDo not overload the power socket that your hub is connected to
lInsert the power plug all the way into the socket so that it is not loose
ModIT-MAX Page 7 of 17
4.Getting Started
4.1.What's Included
l2m Mains power cable (Country specified on order)
lThunderbolt™ 3 Cable
lModIT-MAX Hub
4.2.Connecting to the mains
Making sure you adhere to local safety regulations, connect the power cable to the socket and
switch the power supply on. The hub is now ready to charge attached devices.
4.3.Registration
You may register your product at www.cambrionix.com to download LiveViewer and our API.
4.4.Help and Support
FAQs and help can be found on the Help page here
lwww.cambrionix.com/help_pages/help.
You can raise a support ticket for more in depth support here
lwww.cambrionix.atlassian.net/servicedesk/customer/portals
You can also download any of our manuals and keep up to date at the link here
lwww.cambrionix.com/product-user-guides
ModIT-MAX Page 8 of 17
5.Using your ModIT-MAX
5.1.Using without connecting to a host computer
When the Hub is switched on (and not connected to a local host computer) it is automatically
configured to charge devices using its intelligent charging algorithm. Simply connect the devices
to any of the available ports using USB2.0 or USB3.2 compliant cables. Once the devices are
connected, the algorithm will detect the highest charge rate allowable for each attached
device.
During profiling the LEDs will flash red. Charging at the optimum rate specified by the
manufacturer (up to 2.4 Amps) will commence once profiling is complete. At this point the red
LEDs will be constantly illuminated. Depending on the state of charge of the device attached,
profiling may take tens of seconds. Once the device is nearly fully charged and the current draw
falls below a set limit for a given period of time, the green LEDs will be illuminated.
5.2. Using when connected to a host computer
5.2.1 Charging
When one of the Thunderbolt™ ports is connected to a Thunderbolt™ 2 or Thunderbolt™ 3 port
of a local computer, the hub defaults to Sync mode and charge currents are determined
according to USB Implementers Forum (USB-IF) SuperSpeed USB3.2 specifications. If the
attached device complies with USB-IF Battery Charging specification BC1.2 and supports
Charging Downstream Port (CDP), the hub can provide high-speed charging at 2.4A. If the
connected device does not comply with BC1.2, the charge current will be limited to 500mA in
compliance with USB specifications.
5.2.2 Data Transfer
If you wish to transfer data, install applications, restore or update attached mobile devices, a
data connection to a local host computer is required. The hub works independently to the
Operating System (OS) and data transfer can be performed on all common operating systems,
such as iOS™, Android™, Chromebook™ and Microsoft Windows™. Many versions of Linux® are
also supported.
ModIT-MAX Page 9 of 17
In order to transfer data, connect the Thunderbolt™ port of your local (host) computer to one
of the Thunderbolt™ ports on the back of the hub using a Thunderbolt™ 3 compliant cable. A
Thunderbolt™ 2 cable with a Thunderbolt™ 2-3 adaptor can also be used with consequently
reduced data speeds. Any devices connected to the hub will now appear as if they were
connected to the host computer’s USB port. The hub is fully compliant with SuperSpeed USB3.2
and can provide up to 5Gbps data transfer speeds per port. A yellow LED above each port will
illuminate when Syncing. You can use the program of your choice to transfer data to and from
your device. If the attached device has a BC1.2 compliant CDP port, the device can draw up to
1.5A while transferring data.
Andere Handbücher für ModIT-MAX
6
Inhaltsverzeichnis
Andere CAMBRIONIX Computerhardware Handbücher
CAMBRIONIX
CAMBRIONIX PDSync-C4 Bedienungsanleitung
CAMBRIONIX
CAMBRIONIX OEM U16S Bedienungsanleitung
CAMBRIONIX
CAMBRIONIX OEM PDS-C4 Bedienungsanleitung
CAMBRIONIX
CAMBRIONIX OEM-U8S Bedienungsanleitung
CAMBRIONIX
CAMBRIONIX SuperSync15 Bedienungsanleitung
CAMBRIONIX
CAMBRIONIX PP15S Bedienungsanleitung
CAMBRIONIX
CAMBRIONIX ModIT-Boss Bedienungsanleitung
CAMBRIONIX
CAMBRIONIX OEM U16S Bedienungsanleitung
CAMBRIONIX
CAMBRIONIX TS3-C10 Bedienungsanleitung
Beliebte Computerhardware Handbücher anderer Marken
EMC2
EMC2 VNX Series Betriebsanleitung
Panasonic
Panasonic DV0PM20105 Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung
Gigabyte
Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung
Raidon
Raidon iT2300 Bedienungsanleitung
National Instruments
National Instruments PXI-8186 Bedienungsanleitung
