CAMDEN CM-419 Bedienungsanleitung
5151 Everest Drive, Unit #6 Mississauga, ON L4W 2Z3 Tel: 905-366-3377 Fax: 905-366-3378
CM-419
Request to Exit Motion Detector
(Indoor Use Only)
PRODUCT DESCRIPTION
The Camden CM-419 passive infared « request-to-exit » sensor is specifically designed for
applications involving coverage at the threshold of a doorway. A number of field selectable
options and adjustments make it a compatable choice for access control applications, door
strike release and alarm system shunting.
1.PARTS DESCRIPTION
2.CAUTIONS
3.DETECTION AREAS
- 2 -
4.INSTALLATION
5.WIRING
- 3 -
6.OPERATION AND FUNCTION
7. OPERATION CHECK
(1) After wiring, set the LED to the on mode and check the operation. It takes aprox. 1 minute for warm up after
turning the power on.
(2) Confirm the detection zone by walk testing the unit.
(3) Check the operation of the connected equipment.
(4) If necessary, make fine adjustments.
- 4 -
8. TROUBLESHOOTING
9. SPECIFICATION
PRODUCT NAME REX SENSOR (REQUEST TO EXIT SENSOR)
DETECTION SYSTEM Passive Infrared
MOUNTING HEIGHT 13 ft. (4m) Max
PATTERN
Single door or double door selectable
ADJUSTMENT RANGE
Wall mount : Vertically 35 Degrees (8 steps)
Overhead mount : Vertically 20 degrees (5 steps)
DETECTION
AREA
SENSITIVITY Adjustable
POWER SUPPLY
12 to 24VDC (Non polarity)
or -AC 20 to 24V use
12 to 24VAC (50Hz/60Hz) resister supplied
POWER CONSUMPTION 40mA or less /DC 70mA or less /AC
OUTPUT
Dry contact relay 2C - 30V (DC) 1A or less / 125V
(AC) 0.6A or less
Operation : One Shot
Hold time : Adjustable Approx. 0.25sec. to 60 sec.
*Selectable relay operation
LED Green Operation : Synchronous dry contact relay
(LED )disabled
WIRING CONNECTION Terminals
TEMPERATURE RANGE +14 deg. F to +122 Deg. F (-10 Deg. C to +50 Deg. C)
MOUNTING POSITION Wall ceiling, on or under frame (Indoor)
WEIGHT 5.95 oz (170g)
COVER White or Silver
APPEARANCE WINDOW White
ACCESSORIES
• Tapping screws : 2 pc.
• Resister (82ohms, 3W) : 1pcs for AC 20 to 24V
• Cover locking screw : 1 pc.
- 5 -
10. EXTERNAL DIMENSIONS
CAUTION
• Follow the voltage of the indicate
d
p
ower supply and wiring instruction.
Incorrect voltage and wiring may cause
fire, electrical shock etc.
• Do not connect equipment that exceeds
the indicated output capacity. It ma
y
cause fire.
• Do not modify this product. It ma
y
cause fire, electric shock etc.
WARRANTY
Camden Door Controls guarantees the CM-
419 to be free from manufacturing defects
for 3 years from date of sale. If during the
first 3 years the CM-419 fails to perfor
m
correctly, it may be returned prepaid to ou
r
factory where it will be repaired or replace
d
(at our discretion) without charge. Except as
stated herein, Camden extends no warranties
expressed or implied regarding function,
performance or service.
Questions ?
Call us toll-free at :
1-877-226-3369
Filename: CM-419_new Instructions. ocd
Revision Date: 12/01/2004 10:26 AM
- 6 -
Inhaltsverzeichnis
Andere CAMDEN Sicherheitssensor Handbücher
