Cameo H1 FC Bedienungsanleitung

USER´S MANUAL

BEDIENUNGSANLEITUNG

MANUEL D´UTILISATION

MANUAL DE USUARIO

INSTRUKCJA OBSŁUGI

MANUALE D´USO

H1 FC

COMPACT HOUSE LIGHT - FULL COLOUR LED

CLH1FC(WH)

CONTENTS / INHALTSVERZEICHNIS / CONTENU / CONTENIDO / TREŚĆ /

CONTENUTO

ENGLISH

INFORMATION ON THIS USER MANUAL 5

INTENDED USE 5

DEFINITIONS AND SYMBOL EXPLANATIONS 5

SAFETY INSTRUCTIONS 6

INSTRUCTIONS FOR INDOOR INSTALLATION EQUIPMENT 10

INCLUDED 10

INTRODUCTION 11

CONNECTIONS, OPERATING AND DISPLAY ELEMENTS 12

CABLING THE CONNECTION TERMINAL 15

CONTROL VIA THE UNICON REMOTE UNIT 16

DIFFUSERS 24

TRUSS INSTALLATION 25

SUSPENDED INSTALLATION 25

CARE, MAINTENANCE AND REPAIR 27

OPTIONAL ACCESSORIES 28

TECHNICAL DATA 30

MINIMUM DISTANCE TO ILLUMINATED SURFACE 31

MINIMUM DISTANCE TO NORMALLY FLAMMABLE MATERIALS 31

DISPOSAL 31

MANUFACTURER’S DECLARATIONS 32

DEUTSCH

INFORMATIONEN ZU DIESER BEDIENUNGSANLEITUNG 33

BESTIMMUNGSGEMÄSSER GEBRAUCH 33

BEGRIFFS- UND SYMBOLERKLÄRUNGEN 33

SICHERHEITSHINWEISE 34

HINWEISE FÜR INDOOR-INSTALLATIONSGERÄTE 39

LIEFERUMFANG 39

EINFÜHRUNG 40

ANSCHLÜSSE, BEDIEN- UND ANZEIGEELEMENTE 41

ANSCHLUSSTERMINAL VERKABELN 44

BEDIENUNG PER REMOTE-EINHEIT UNICON 45

STREUSCHEIBEN 54

TRAVERSENMONTAGE 55

HÄNGENDE INSTALLATION 55

PFLEGE, WARTUNG UND REPARATUR 57

OPTIONALES ZUBEHÖR 58

TECHNISCHE DATEN 60

MINDESTABSTAND ZUR BELEUCHTETEN FLÄCHE 61

MINDESTABSTAND ZU NORMAL ENTFLAMMBAREN MATERIALIEN 61

ENTSORGUNG 61

HERSTELLERERKLÄRUNGEN 62

CONTENTS / INHALTSVERZEICHNIS / CONTENU / CONTENIDO / TREŚĆ /

CONTENUTO

FRANÇAIS

INFORMATIONS CONCERNANT CE MANUEL D’UTILISATION 63

UTILISATION CONFORME 63

EXPLICATIONS DES TERMES ET DES SYMBOLES 63

CONSIGNES DE SÉCURITÉ 64

CONSIGNES POUR LES APPAREILS D’INSTALLATION INTÉRIEURE 69

CONTENU DE LA LIVRAISON 69

PRÉSENTATION 70

RACCORDEMENTS, ÉLÉMENTS DE COMMANDE ET D’AFFICHAGE 71

CÂBLAGE DE LA BORNE DE RACCORDEMENT 74

COMMANDE PAR UNITÉ DE COMMANDE À DISTANCE UNICON 75

DIFFUSEURS 84

MONTAGE SUR TRAVERSE 85

INSTALLATION SUSPENDUE 85

ENTRETIEN, MAINTENANCE ET RÉPARATION 87

ACCESSOIRES EN OPTION 88

CARACTÉRISTIQUES TECHNIQUES 90

DISTANCE MINIMALE PAR RAPPORT À LA SURFACE ÉCLAIRÉE 91

DISTANCE MINIMALE PAR RAPPORT AUX MATÉRIAUX NORMALEMENT INFLAMMABLES 91

ÉLIMINATION 91

DÉCLARATIONS DU FABRICANT 92

ESPAÑOL

INFORMACIÓN SOBRE ESTE MANUAL DE INSTRUCCIONES 93

USO PREVISTO 93

TÉRMINOS Y SÍMBOLOS 93

INSTRUCCIONES DE SEGURIDAD 94

INSTRUCCIONES PARA LOS EQUIPOS DE INSTALACIÓN FIJA EN INTERIORES 99

VOLUMEN DE SUMINISTRO 99

INTRODUCCIÓN 100

CONEXIONES, ELEMENTOS DE MANEJO Y ELEMENTOS DE VISUALIZACIÓN 101

CABLEADO DEL TERMINAL DE CONEXIONES 104

MANEJO CON EL MANDO A DISTANCIA UNICON 105

DIFUSORES 114

MONTAJE EN TRAVESAÑO 115

INSTALACIÓN EN SUSPENSIÓN 115

CUIDADO, MANTENIMIENTO Y REPARACIÓN 117

ACCESORIOS OPCIONALES 118

DATOS TÉCNICOS 120

DISTANCIA MÍNIMA CON RESPECTO A LA SUPERFICIE ILUMINADA 121

DISTANCIA MÍNIMA CON RESPECTO A MATERIALES NORMALMENTE INFLAMABLES 121

ELIMINACIÓN 121

DECLARACIONES DEL FABRICANTE 122

CONTENTS / INHALTSVERZEICHNIS / CONTENU / CONTENIDO / TREŚĆ /

CONTENUTO

POLSKI

INFORMACJE DOTYCZĄCE NINIEJSZEJ INSTRUKCJI OBSŁUGI 123

UŻYTKOWANIE ZGODNE Z PRZEZNACZENIEM 123

OBJAŚNIENIA TERMINÓW I SYMBOLI 123

ZASADY BEZPIECZEŃSTWA 124

UWAGI DOTYCZĄCE URZĄDZEŃ SŁUŻĄCYCH DO MONTAŻU WE WNĘTRZACH 129

ZAKRES DOSTAWY 129

WPROWADZENIE 130

PRZYŁĄCZA, ELEMENTY OBSŁUGI I WSKAŹNIKI 131

OKABLOWANIE LISTWY PRZYŁĄCZENIOWEJ 134

OBSŁUGA ZA POMOCĄ JEDNOSTKI ZDALNEJ UNICON 135

DYFUZORY 144

MONTAŻ NA KRATOWNICY 145

MONTAŻ WISZĄCY 145

CZYSZCZENIE, KONSERWACJA I NAPRAWY 147

AKCESORIA DODATKOWE 148

DANE TECHNICZNE 150

MINIMALNA ODLEGŁOŚĆ OD POWIERZCHNI OŚWIETLONEJ 151

MINIMALNA ODLEGŁOŚĆ OD NORMALNIE ŁATWOPALNYCH MATERIAŁÓW 151

UTYLIZACJA 151

DEKLARACJE PRODUCENTA 152

ITALIANO

INFORMAZIONI SUL PRESENTE MANUALE D'USO 153

UTILIZZO CONFORME 153

SPIEGAZIONE DI CONCETTI E SIMBOLI 153

INDICAZIONI SULLA SICUREZZA 154

NOTE SUI DISPOSITIVI PER INSTALLAZIONI ELETTRICHE IN AMBIENTI INTERNI 159

DOTAZIONE 159

INTRODUZIONE 160

CONNETTORI, ELEMENTI DI COMANDO E VISUALIZZAZIONE 161

CABLAGGIO DEL TERMINALE DI COLLEGAMENTO 164

COMANDO TRAMITE UNITÀ REMOTA UNICON 165

DIFFUSORI 174

MONTAGGIO SU TRAVERSA 175

INSTALLAZIONE A SOSPENSIONE 175

PULIZIA, MANUTENZIONE E RIPARAZIONE 177

ACCESSORI OPZIONALI 178

DATI TECNICI 180

DISTANZA MINIMA DALLA SUPERFICIE ILLUMINATA 181

DISTANZA MINIMA DAI MATERIALI NORMALMENTE INFIAMMABILI 181

SMALTIMENTO 181

DICHIARAZIONI DEL PRODUTTORE 182

DMX

DMX CONTROL / DMX STEUERUNG / PILOTAGE DMX / CONTROL DMX /

STEROWANIE DMX / CONTROLLO DMX 183

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

ENGLISH

YOU HAVE MADE THE RIGHT CHOICE!

This device has been developed and manufactured to the highest quality standards to ensure

many years of problem-free operation. Please read this user manual carefully to be able to use

your new Cameo product quickly and optimally. Further information about Cameo Light is avail-

able on our website CAMEOLIGHT.COM.

INFORMATION ON THIS USER MANUAL

•Carefully read the safety instructions and the entire manual before operating the device.

•Observe the warnings on the device and in the user manual.

•Always keep the user manual within reach.

•If you sell or pass on the device, it is important that you also include this user manual, as it is an

integral part of the product.

INTENDED USE

This product is a spotlight for permanent installation!

This spotlight is intended exclusively for professional users and is not suitable for private house-

holds or third parties!

Use of the product outside the specified technical data and operating conditions, as well as incor-

rect installation, is considered inappropriate!

Liability for damage and third-party damage to persons and property due to inappropriate use is

excluded!

The product is not suitable for:

•Use by persons (including children) with limited physical, sensory or mental abilities or lack of

experience and knowledge.

•Children (children must be instructed not to play with the device).

DEFINITIONS AND SYMBOL EXPLANATIONS

1. HAZARD: The word HAZARD, possibly in combination with a symbol, indicates situations in

which there is an immediate danger or risk of potentially fatal injury.

2. WARNING: The word WARNING, possibly in combination with a symbol, indicates situations in

which there is an immediate danger or risk of potentially fatal injury.

3. CAUTION: The word CAUTION, possibly in combination with a symbol, indicates situations or

conditions that could result in injury.

4. ATTENTION: The word ATTENTION, possibly in combination with a symbol, indicates situations

or conditions that could result in damage to property and/or the environment.

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

This symbol identifies hazards that can cause electric shock.

This symbol identifies hazardous areas or hazardous situations.

This symbol indicates hazards caused by hot surfaces.

This symbol indicates hazards caused by intense light sources.

This symbol indicates a device in which there are no user-replaceable parts.

This symbol indicates additional information on the operation of the product.

SAFETY INSTRUCTIONS

HAZARD:

1. Do not open the device and do not perform any modifications.

2. If your device no longer functions properly, if liquids or objects get inside it or if it

has been damaged in any other way, switch it off immediately and unplug it from

the power source. The device may be repaired only by authorised repair techni-

cians.

3. For devices of protection class 1, the protective conductor must be connected

correctly. Never disconnect the protective conductor. Devices of protection class 2

do not have a protective conductor.

4. Ensure that live cables are not kinked or otherwise mechanically damaged.

5. Never bypass the device fuse.

WARNING:

1. The device may not be operated if it shows obvious signs of damage.

2. The device may only be installed in a voltage-free state.

3. If the device's power cable is damaged, the device may not be used.

4. Permanently connected power cables may only be replaced by a qualified person.

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

CAUTION:

1. Do not switch on the device if it has been exposed to extreme temperature fluctu-

ations (for example, following transport). Moisture and condensation can damage

the device. Switch on the device only when it has reached room temperature.

2. Ensure that the voltage and frequency of the mains supply match the values

specified on the device. If the device has a voltage selector switch, do not connect

the device until it has been set correctly. Use only suitable power cables.

3. To disconnect the device from the mains on all poles, it is not sufficient to press

the on/off switch on the device.

4. Make sure that the fuse used corresponds to the type printed on the device.

5. Ensure that suitable measures have been taken against overvoltage (e.g. lightning

strikes).

6. Observe the specified maximum output current on devices with a Power Out con-

nection. Ensure that the total current consumption of all connected devices does

not exceed the specified value.

7. Replace plug-in power cables with original cables only.

HAZARD:

1. Choking hazard! Plastic bags and small parts must be kept out of reach of per-

sons (including children) with reduced physical, sensory or mental capabilities.

2. Risk of falling! Make sure that the device is securely installed and will not fall

down. Only use suitable stands or mounts (particularly for fixed installations).

Ensure that accessories are properly installed and secured. Ensure that applicable

safety regulations are observed.

WARNING:

1. Use the device in the prescribed manner only.

2. Operate the device using only accessories of the type recommended and supplied

by the manufacturer.

3. Observe safety regulations applicable in your country during installation.

4. After connecting the device, ensure that all cables are routed so as to avoid dam-

age or accidents, such as from tripping.

5. Always observe the specified minimum distance to normally flammable materials!

Unless explicitly stated, the minimum distance is 0.3 m.

6. Always observe the minimum distance to the illuminated surface, which can be

read on the device!

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

CAUTION:

1. Moving components such as mounting brackets may become jammed.

2. In the case of devices with motor-driven components, there is a risk of injury due

to the movement of the device. Sudden movement of the device can cause shock

reactions.

3. The housing surface of the device can become very hot during regular operation.

Ensure that accidental touching of the housing is not possible. Always allow the

device to cool sufficiently before removal, maintenance work and charging etc.

CAUTION:

1. Do not install or use the device in the vicinity of radiators, accumulators, stoves,

or other heat sources. Ensure that the device is always installed in such a way

that it is sufficiently cooled and cannot overheat.

2. Do not place any ignition sources, such as burning candles, near the device.

3. Ventilation openings must not be covered and fans must not be blocked.

4. For transport, use the original packaging or packaging provided by the manufac-

turer.

5. Avoid any impacts to or shaking of the device.

6. Observe the IP rating and the ambient conditions such as temperature and hu-

midity according to the specifications.

7. Devices can be continuously further developed. In the event of deviating informa-

tion on operating conditions, performance or other device properties between the

user manual and the device labelling, the information on the device always has

priority.

8. The device is not suitable for tropical climate zones or for operation over 2,000 m

above sea level.

9. Unless explicitly stated, the device is not suitable for operation under marine

conditions.

CAUTION! IMPORTANT INFORMATION REGARDING LIGHTING PRODUCTS!

1. Never look directly into the beam of light, not even for a short period of time.

2. Never look into the beam of light using optical devices such as a magnifying

glass.

3. Stroboscopic effects may cause epileptic seizures in susceptible individuals!

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

4. A permanently installed lamp is installed in this lighting unit which must not

be replaced by the user. In the event of a fault, please contact your distribution

partner.

SIGNAL TRANSMISSION BY RADIO (e.g. W-DMX or audio radio systems):

The quality and performance of wireless signal transmissions generally depends on

the ambient conditions.

The following factors can impact range and signal stability, for example:

Shielding (e.g. masonry, metal structures, water)

High volume of radio traffic (e.g. powerful wireless LAN networks)

Interference

Electromagnetic radiation (e.g. LED video screens, dimmers)

All range specifications refer to free-field application with visual contact and without

interference!

The operation of transmission systems is subject to official regulations. These may

vary from region to region and must be checked by the operator before use (e.g.

radio frequency and transmission power).

WARNING: Devices with wireless signal transmission are not suitable for use in

sensitive areas in which radio operation can lead to potential detrimental effects.

These include:

•Hospitals, health centres or other healthcare facilities that provide patient

treatment with skilled personnel and equipment.

•Hazardous areas Class I, II and III

•Restricted areas

•Military facilities

•Aircraft or vehicles

•Areas where the use of mobile phones is prohibited

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

TRANSMISSION VIA W-DMX

WARNING: In general, wireless DMX transmission must not be used for applica-

tions involving safety-related factors that might result in personal injury or property

damage in the event of a failure.

This applies in particular to moving scene or traverse structures, DMX-controlled

motors/lifts or lifting devices for operating DMX-operated platform lifts, hydraulic

systems or comparable moving components.

Furthermore, wireless DMX transmission must not be used to trigger flame or pyro-

technic devices, explosion-driven effects, or to control gas or liquid effects. These

include CO2 cannons, confetti shooters, water effects or similar.

INSTRUCTIONS FOR INDOOR INSTALLATION EQUIPMENT

1. Equipment for installation applications is designed for continuous operation.

2. Equipment for indoor installation is not weather-resistant.

3. Surfaces and plastic parts can also age in installation equipment, e.g. due to UV

irradiation and temperature fluctuations. This generally does not impair function-

ality.

4. With permanently installed devices, the accumulation of impurities, e.g. dust, is to

be expected. Always observe the care instructions.

5. Unless explicitly stated otherwise on the device, the devices are intended for

installation heights of less than 5 m.

INCLUDED

Remove the product from the packaging and remove all packaging material.

Please check the completeness and integrity of the delivery and notify your distribution partner

immediately after purchase if the delivery is not complete or if it is damaged.

Product includes:

XSpotlight

X3x diffusion lens (1x pre-assembled)

XMounting bracket (pre-assembled)

XUser manual

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Cameo Scheinwerfer Handbücher

Cameo

Cameo CLQS40WW Bedienungsanleitung

Cameo

Cameo Q SPOT Bedienungsanleitung

Cameo

Cameo ROOT PAR 4 Bedienungsanleitung

Cameo

Cameo FLAT PRO 7 G2 Bedienungsanleitung

Cameo

Cameo FLAT PRO SPOTIX CLFLATPROSP4 Bedienungsanleitung

Cameo

Cameo ROOT PAR TW Bedienungsanleitung

Cameo

Cameo ROOT PAR TW Bedienungsanleitung

Cameo

Cameo TS 200 FC Bedienungsanleitung

Cameo

Cameo CLZW600IFULLGS Bedienungsanleitung

Cameo

Cameo ROOT PAR BATTERY Bedienungsanleitung

Cameo

Cameo CLZW600IMP Bedienungsanleitung

Cameo

Cameo CLZIEXDISP Bedienungsanleitung

Cameo

Cameo Q-SPOT 40i Bedienungsanleitung

Cameo

Cameo P2 T Bedienungsanleitung

Cameo

Cameo FLAT PRO CLPFLATPRO7XS Bedienungsanleitung

Cameo

Cameo P2 FC Bedienungsanleitung

Beliebte Scheinwerfer Handbücher anderer Marken

Guangzhou Yinhe Lighting&Sound Equipment Factory

Guangzhou Yinhe Lighting&Sound Equipment Factory NE-204 Bedienungsanleitung

LIVARNO home

LIVARNO home 375304 2101 Originalbetriebsanleitung

Leviton

Leviton Ellipsoid 5/50 Bedienungsanleitung

Monacor

Monacor img Stage Line PARL-56PDX/CR Bedienungsanleitung

Vector

Vector SL3AKV Bedienungsanleitung

Quantum

Quantum Q262 Betriebshandbuch

Philips

Philips Vari-lite VL3015LT Bedienungsanleitung

EUROSPOT

EUROSPOT C51 Bedienungsanleitung

DTS

DTS MINI BRICK ARC Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation VISIBEAM II Handbuch

ACME

ACME LED-MS350B Bedienungsanleitung

EuroLite

EuroLite Akku flat light 1 Bedienungsanleitung

Commercial Electric

Commercial Electric SPTM-1401 Bedienungsanleitung

Vision & Control

Vision & Control SLB-500-W5K7-P-SL Bedienungsanleitung

Teknik

Teknik FLEXI Bedienungsanleitung

Craftsman

Craftsman CMXLSB10 Bedienungsanleitung

EuroLite

EuroLite LED SLS-144 UV Floor Spot Bedienungsanleitung

Ignition

Ignition WAL-L412 BP Bedienungsanleitung