2
Chapter 1 Introduction
PG-V1 is a test pattern generator with VGA connector
designed to be a useful tool for the new generation of digital
monitor products. PG-V1 supports up to 20 resolutions and
34 patterns for you to test and calibrate a digital monitor.
Further, it also can improve the quality of digital monitor with
side by side comparisons. Through the friendly interface
and smart design, not only you can easy to use the PG-V1
but also you can reduce your test expenditure.
Caution
To avoid and minimize the risk of damage to PG-V1, please
pay attention to the safety instructions even though the
PG-V1 had been tested for conformance to safety
requirements and certified for international using.
Follow all instructions marked on the device during using.
Do not attempt to maintain the device by yourself, any
faults, please contact your vendor.
Provide proper ventilation and air circulation and do not
use near water.
It is better to keep it in a dry environment.
Only using the power adapter and connection cables that
are supported with the device.
After purchasing and before using the PG-V1 first time,
please charge it continuously for more than 16 hours.
It is better to charge the battery when the battery power
indicator becomes low.
The PG-V1 will save the last setting values automatically.
Do not use liquid or aerosol cleaners to clean the device.
Always unplug the power to the device before cleaning.
1.1 Package Contents
1 VGA pattern generator PG-V1
1 power adapter with DC 12V 1.25A, 4 replaceable plugs
(for USA, UK, Europe and Australia DC plugs.)
1 user manual
1 VGA 1.2M cable (HD-15 Male to Male)
All packages have been checked carefully for their
completeness and functionality before shipped. Please
contact with your vendor if any items listed as above are
missing or damaged.
