CanyCom CMX 227 Bedienungsanleitung
Operator's Manual
Read this manual completely before operating or maintaining this machine.
Failure to follow safety precautions could result in serious injury or death.
Keep this manual for future reference by you and by all those who operate
and maintain this machine.
Original Instructions (in English)
Ride-on Brushcutter
CMX227 / CM226
5347 5451 001
Notice to Users and Maintenance Personnel
Thank you for purchasing this machine.
This manual provides information needed for safe and effective use of this machine to
those who operate or maintain this machine. Make sure to read and understand the manual
thoroughly before operating this machine. Also make sure to read the separate engine
manual.
• This machine can be very dangerous if the safety precautions in this manual
and on the labels attached to this machine are not followed. Read and
understand this manual and safety labels on the machine thoroughly before
using this machine. Always follow the instructions and safety precautions, or
serious injury or death could result.
• This machine should only be used for its intended purpose: cutting grass and
bushes. Any other use could be dangerous.
• This machine may not be operated on public road or what is considered to
be public road. It is the sole responsibility of the operator to consult the local
regulations.
• Do not modify this machine, or do not operate this machine with the safety
covers removed or open. A serious accident could result.
• Store this manual in a safe, accessible place for easy reference.
Warning Term Denition
Indicates an imminently hazardous situation which will result
in death or serious injury if the user does not follow the
procedures or the instructions.
Indicates a potentially hazardous situation which could result
in death or serious injury if the user does not follow the
procedures or the instructions.
Indicates a potentially hazardous situation which could result
in minor to moderate injury or damage to the machine if the
user does not follow the procedures or the instructions.
Indicates important information which needs particular
attention.
In this manual, the following four warning terms are used to signal the four levels of hazard (or
seriousness of possible accidents). Read and understand what they mean and always follow
the instructions in this manual.
Warning Terms Used in this Manual
NOTE
Notice to Owner
• Be sure that everyone who uses this machine, including those who rent or
lease this machine, receives a copy of this Operator's Manual and understands
the importance of reading and following the information in this manual.
Location of Model Label
5347M-0005-011E
Location of Model Label
Model Label
5347M-0005-022E
The replacement or repair parts for this product shall remain available for nine years after the
production of this type of machine is discontinued.
Availability of Spare Parts
Warranty and After-Sales Service
CHIKUSUI CANYCOM, INC. guarantees this product, based on the terms of warranty.
Warranty
Consult your local CANYCOM dealer or our company’s sales department regarding service
orders or any questions or problems that may arise when using this machine. Please make
sure to have the product name, serial number, and the make and type of the engine handy at
the time of contact. The model and serial numbers can be found on the model label as shown
below, and the make and type of the engine can be found in Chapter 3 "Specications" of
this manual (Page15).
After-Sales Service
Contents
1. Safety 1
Safety Labels ...................................1
Safety Mechanisms ..............................3
Safety Precautions...............................4
Training .......................................................4
Preparation ....................................................5
Operation......................................................6
Servicing .....................................................10
2. Controls and Components 11
Name and Function of Controls ...................11
3. Specications 15
Product Specications ..........................15
Contents of Tool Bag ...........................16
4. Operation 17
Preparation ....................................17
Pre-start up Inspection..........................................17
Checking and Filling Fuel .......................................17
Adjusting Steering Wheel (Yamaha Engine) ........................19
Adjusting Seating Position - (Normal or Extra seat) ..................20
Adjusting Seating Position - Comfort Seat .........................24
Adjusting Drive Pedal...........................................26
Driving........................................27
Starting ......................................................27
Driving .......................................................30
Stopping .....................................................33
Shifting.......................................................34
Shifting Between 2WD and AWD (AWD models) .....................35
Locking Dierential ............................................36
Parking.......................................................37
Working .......................................39
Inspecting Cutting Blade ........................................39
Adjusting Cutting Height ........................................39
Cutting .......................................................40
5. Maintenance 45
Maintenance Schedule ..........................45
Engine .......................................................45
Chassis ......................................................46
List of Fluids and Lubricants .....................49
Greasing Points ................................50
Greasing Points (CMX227).......................................50
Greasing Points (CM226) ........................................51
List of Consumables and Spares ..................52
Removing and Installing Body Panels ..............54
Front Cover ...................................................54
Head Light ....................................................55
Engine Hood ..................................................56
Rear Cover....................................................56
Step .........................................................56
Cutting Blade Shield............................................57
Engine ........................................59
Engine Oil ....................................................59
Oil Filter Cartridge .............................................61
Air Filter ......................................................62
Spark Plugs ...................................................63
Drive Train.....................................63
Tires .........................................................63
Transmission Oil...............................................64
Front Axle Oil (AWD models) .....................................64
HST (Hydrostatic Transmission) Oil ...............................65
Drive Belt .....................................................69
Parking Brake .................................................70
Cutting System.................................71
Cutting Blades.................................................71
Mower Drive Belt...............................................74
Mower Brake ..................................................75
Mower Gearbox Oil .............................................77
Electrical System ...............................78
Battery .......................................................78
Fuses ........................................................80
Light Bulbs ...................................................81
After Use Care .................................82
Cutting System ................................................82
After Normal Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
After Cold Weather Use .........................................85
Storage .......................................86
6. Troubleshooting 87
Troubleshooting ...............................................87
Appendix
• Engine Manual
* Be sure to read and understand it together with this manual .
7. Transporting 92
Hauling .......................................92
Loading and Unloading .........................................92
Hoisting.......................................93
Safety 1
-1-
Safety Labels
The safety labels shown on the next page are attached to the machine. See the illustration
below for the location and the illustration on the next page for the content of each label on
the machine.
• Locate all the warning labels attached to this machine. Read and follow the instructions
and precautions in them. Failure to do so could result in serious injury or death to the
operator or bystanders.
• Keep the labels clean and legible. Do not use solvents or gasoline to clean the labels.
• Replace these labels immediately if they have been removed, have fallen o or become
illegible. Use the part number, on the label or shown in this manual, to order a replacement
label from your CANYCOM representative.
5
2
4
3
6
8
6
10
9
1
7
5347M-5351-0101-011
(Models with the
Charge-pump only)
AWD Models
(CMX227)
11
Safety
-2-
1
5332 5127 0008 X73-20057-60(Robin Engine)
10 7DS-24162-00(Yamaha Engine)
5347 5109 000
15332 5121 000
35332 5122 000
4
5332 5128 000
55321 5116 000
6
3667 5063 000
11
5347 5114 000
2
5347M-0101-023E
5305 5326 0007
5347 5125 000
9
Andere Handbücher für CMX 227
2
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere CanyCom Freischneider Handbücher
CanyCom
CanyCom CM 230 Bedienungsanleitung
CanyCom
CanyCom CMX 227 Bedienungsanleitung
CanyCom
CanyCom CMX 253 Bedienungsanleitung
CanyCom
CanyCom CM1802 Bedienungsanleitung
CanyCom
CanyCom CMX 224 Bedienungsanleitung
CanyCom
CanyCom Masao CMX1402 Bedienungsanleitung
CanyCom
CanyCom CMX 227 Bedienungsanleitung
CanyCom
CanyCom CMX222 Bedienungsanleitung
CanyCom
CanyCom MASAO CMX 2502 Bedienungsanleitung
