Capelec CAP2600 Bedienungsanleitung

Rev A

1130, rue des Marels

FR 34000 MONTPELLIER

Phone: (33) 0 467 156 156

Fax: (33) 0 467 224 224

e-mail: contact@capelec.fr

www.capelec.fr

USER MANUAL

CAP2600 WORKSHOP™

Expert | Universal headlight beam tester

 
 
Edit: 30/07/19 | Rev A | Page: 1 
Contents 
 
 
 
Introduction...................................................................................................................................................2 
Section 1: COMMISSIONING..........................................................................................................................3 
I. Area of use..............................................................................................................................................3 
II. Installation and commissioning.............................................................................................................3 
2.1 Assembly instructions......................................................................................................................3 
2.2 Configuration: first start up .............................................................................................................5 
2.3 Computer links.................................................................................................................................5 
2.4 Without a connection......................................................................................................................9 
2.5 Customising and entering the garage header ...............................................................................10 
Section 2: USER MANUAL ............................................................................................................................11 
I. Overview...............................................................................................................................................11 
II. Positioning the CAP2600 Workshop™.................................................................................................14 
2.1 Vehicle preparation .......................................................................................................................14 
2.2 Positioning in the vehicle length axis ............................................................................................15 
2.3 Positioning the optical block in front of the headlamp.................................................................16 
III. Lamp inspection..................................................................................................................................17 
3.1 Inspection sequence......................................................................................................................17 
3.2 Expert report..................................................................................................................................23 
3.3 Advice when using the expert function.........................................................................................27 
IV. Configuration......................................................................................................................................28 
V. Care and maintenance recommendations..........................................................................................29 
 

Edit: 30/07/19 | Rev A | Page: 2

Introduction

Thank you for having purchased the CAP2600 Workshop™ headlamp adjustment system. It has embedded

image processing technology developed by CAPELEC. It is a powerful expert system for adjusting and

checking lighting.

It is compatible with all headlamp lighting technologies installed on heavy and light road vehicles of the

M1, M2 and N1 categories (vehicles with a gross vehicle weight of less than 3.5 tonnes)

Please read this manual carefully before using the CAP2600 WORKSHOP™.

Keep it in a safe place to be able to consult it if necessary.

Note: The information in this document is subject to change without notice. CAPELEC cannot be held liable for direct or indirect

damage of any type, nor for losses or costs incurred through non compliant use.

WARNING

Precautions for use: the CAP2600 WORKSHOP™ lens must never be exposed to sunlight. The concentration of sunlight can

cause heating and a risk of damaging the equipment and/or burns.

Edit: 30/07/19 | Rev A | Page: 3

Section 1: COMMISSIONING

I. Area of use

Unlike other headlamp beam testers, the CAP2600 WORKSHOP™ does not need to define a work zone

and qualify it. It features innovating and unique technology: the "ANYWHERE" ground compensation

system. The CAP2600 WORKSHOP™ can therefore be used anywhere in your workshop.

II. Installation and commissioning

2.1 Assembly instructions

The CAP2600 WORKSHOP™ is delivered assembled and calibrated.

-Unpacking the CAP2600 WORKSHOP™

Edit: 30/07/19 | Rev A | Page: 4

-Cut the collar and keep the rubber stop.

-Caution: do not allow the metal cable to slip into the column

-Attach the metal cable onto the optical block

-Screw the upper stop to the top of the column

Edit: 30/07/19 | Rev A | Page: 5

2.2 Configuration: first start up

When you first activate the CAP2600 WORKSHOP™, you must select the language, the configuration

(France WS by default), and check the basic parameters: date, time and time zone.

2.3 Computer links

The CAP2600 WORKSHOP™ can be used with or without a computer connection. If you want to connect

your device, you can do so via the CAPELEC router or via your own WIFI network.

Connection to the preconfigured CAPELEC router

The CAP2600 WORKSHOP™ is delivered with a router configured for automatic WIFI connection as an

option. It is used to access the WEB interface and generate the expert report.

-Connect the router to the computer network (1), connect the power supply (2) and then turn on

the power (3)

Edit: 30/07/19 | Rev A | Page: 6

-Start the CAP2600 WORKSHOP™

-The WIFI icon (1) and the WEB interface address (2) appear on the home page

-Open a web browser and enter the displayed address

Edit: 30/07/19 | Rev A | Page: 7

-Add this page to the favourites

Connection to a WIFI network

The CAP2600 WORKSHOP™ can be connected to your WIFI network. It is used to access the WEB interface

and generate the expert report.

-Start the CAP2600 WORKSHOP™

-Go to "Config / Link" and enter the password "2345"

-Go to "Web server" and enter your SSID and key

Bookmark this page

Edit: 30/07/19 | Rev A | Page: 8

For networks with DHCP, keep the "IP AUTO" configuration, otherwise switch to static IP by

unchecking "IP AUTO" and enter an IP address

-Restart the CAP2600 WORKSHOP™

-The WIFI icon (1) and the WEB interface address (2) appear on the home page

-Open a web browser and enter the address

-Add this page to the favourites

Andere Handbücher für CAP2600

Inhaltsverzeichnis

Andere Capelec Prüfgeräte Handbücher

Capelec

Capelec CAP2500 Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung