Caple WC6217 Handbuch

WC6217

Caple 60cm Wine Cabinet

Technical information

Item Part Code Description Qty

1DG2-14 Power cord 1

2DG22-476 Support bar of tank water 2

3DG13-447 Water box 1

4a DG1-93 Compressor 1

4b PJ1-002-C Start Device / Overload Protector 1

5DG3-206 PCB board 1

6DG6-18 Transformer 1

7DG11-41 Condenser 1

8DG13-268 Decorative nail 3

9DG13-473 Limiting bar(B) 1

10 DG13-472 Limiting bar(A) 1

11 DG14-177 Top hinge module 1

12 DG121AEvaporator 1

13 DG12-6.1 Air-circulating pipe 1

14a DG20-1 Wire clamp 1

WC6217

- Caple 60cm in-column Wine Cabinet

14b DG8-8 Senser 1

15 DG7-48 Evaporator fan 1

16 DG22-498 Air duct board 1

17 DG22-499 Upper panel for air-leaded board 1

18 DG22-3000 Middle airway-board 1

19 DG18-98 Foam 1

20 DG13-469 Display support 1

21 DG20-261 Display panel 1

22a DG15-179 Wooden shelves 3

22b DG15-179-1 Wooden shelves 2

23 DG15-193 Decorative bar of stainless steel 6

24 DG23-176-3 Door 1

25 DG22-475 Axis 2

26 DG22-3064 Handle 1

27 M147-005 Gasket 1

28 DG13-3005 Magnet 1

29 DG15-178 Wooden shelves 1

30 DG13-1.2 Humid box 2

31 DG13-198 Senser cover 2

32 DG8-8 Senser 1

33 DG22-500 lower panel for air-leaded board 1

34 DG8-8 Senser 1

35 DG3-18-W LED Light 1

36 DG11-18 PTC heater 1

37 DG7-33-BH Fan 1

38 DG7-41-BH PTC heater fan 1

39 DG13-458 Tank water of airway-board 1

40 DG13-129 LED light cover 1

DG314W

LED li ht

DG3

LED

Item Part Code Description Qty

WC6217

- Caple 60cm in-column Wine Cabinet

42 DG14-176 Lower hinge module 1

43 DG9-16 Reed switch 1

44 DG13-474 Support bar 2

45 DG22-3005 Electrical box cover 1

46 DG22-473 strengthening board 1

47 DG11-45 Drier 1

48 DG14-3.1-1 Fixed capacitor 1

ComputerControlledWineCellar

JG48B

ServiceManual

Herebelowwelistedvariousfaultswhileusingthewinecellar, and themethodofcheck-up andsolvethese

default,and findtheinformationofthecorrespondentpage.

Statement:(Fig.4)showsthereferencefigureFig4

( 6)showsthereferencepage6

Warning:beforeattemptinganycleaningormaintenance thisunitMUSTbedisconnectedfromthe

electricalsupply, topreventelectricalshock

▲Preparationbeforemaintenance

○Tools

1．Pliers2．Phillipsheadscrewdrivers

3．Process pipe 4．ElectricalMultimeter

5．Ampmeter(5A)(calipercabletype)6．Electricalsolderingiron

7．Wirestrippers 8．Sealpliers

○Equipment

1．Vacuumpump 2．Solderingironforcopperpipes 3. Refrigerant meter

1. Safetyrules onoperationof repairing. (Rules must be

obeyed). 2

2.Electrical circuitdiagram. 4

3.Cooling system diagram. 5

4.Nameandfunctionon control panel. 5

5.Howto diagnose the fault. （E1、E2、E3、E4）6

6.Giston disassembly. 9

7.Howto maintain the default. 19

1. Safetyrules onoperationof repairing (Rulesmustbeobeyed).

To avoidtheaccident duringmaintainthewinecooler, and make sure theproduct is safety,

rules must be obeyed list below.

○Below we list the symbols and explain the danger if ignore it.

Danger This symbol means that the instancemay have the chance to suffer

death or a serious wound.

Warning

This symbol means that the instancemay have the chance to suffer

death or a serious wound.’

Notice This symbol means that the instancemay have the chance to suffer

a wound.’

○Below symbols’distinguish and rules should be obeyed.

This symbolmeansthe

instance hope to be

noticed

This symbol means the

instance must be done

forcibly

This symbolmeansthe

instance forbidden

Danger

·Please make sure to discharge therest refrigerant in the parts.

·When dischargingrefrigerant, make surethat it never goto thefire place

and drain to outdoors.

Tell the customers thatthey never closeto thedischarge place and the fire

is forbidden.

·Take apart the pipe by cutter.

Never take apart the part by soldering,otherwise it willfire therest

refrigerantin the systems and cause blast.

·Exhaust the rest refrigerant in the systems before welding.

·After fillingthe refrigerant thesealing should be done byusingsmithing

welding nozzle.

Using the welding machine will firethe refrigerant and blast.

·Since the R600a isheavier than the air,pleaselet the R600a ontheground

go especially for the hypogeum.

·The operation on theservicing refrigerant bottle should bedonein place

without fire and outdoors.

·Use therefrigerantwarnerplease，astherest refrigerantwillcausethe

fire.

·Don’t use fire in the place withrest refrigerant.

·Don’t place the default compressor in indoor.

Danger

·During repairing,the power plug should be disconnected.

Before remove, install, replace parts disconnect the power plug.

·Attentiondon’tget electric shock.

When checking current, voltage or chargingnever touch the connectors.

When changing the parts,don’ttouch the charged parts withinthree minutes

after disconnect the plug.

The capacitor will discharge for some time.

·Don’tdamage the cooling pipe, sine the refrigerant is flammable, the damage

will cause the fireor blast.

·Don’t smoking inthe service car.

·Dischargetherefrigerantentirely intheplacewithoutfirebefore disusing

the refrigerant bottle.

·Don’ttouch thewinecoolerwhen the cooling pipe damaged, don’tfieinside

the wine cooler, keep the windows open to exchange the air.

·Disusing the default compressor should be done outdoor without fire.

·The maximum weightof the refrigerantbottle loaded inthevehicleshould be

comply to stated, the bottle should beplace upright, the maximum leaning angle

is 40°.

·Do use the appointedpart, otherwise it have chance to smoke fire or default.

·Please put the defaultcompressor into plasticbag and seal theperistome,

then pack it with strip, as the restcompressor oil may leak in the vehicle and

cause fire or blast.

·Check if all the snails, parts,wiring are install in it’splace, ifthe area

around the service part worsen.

When measuringthegroundingresistancemakesure thatthetestrange is more

than 1MΩ.

Make surethepowercord and plug never bepinched on rear ofthewine cooler.

Exchange the power cord when it damaged.

Clean the flake of the plugwhen itdirty.

Notice

·Attentionthe hot.

The running orjust stopcompressor and thepipesometimes are very hot. And

the heatingor juststop heater is very hot. The hot willcause scald.

·Attentionthe hotparts of the pipe after the welding.

·Attentionthe refrigerant during charge anddischarge it,as itwillfrostbite

the skin when touchit.

·Attentionthe burr.

The burr onthe metal or plastic part may hurtthe hand.

·Attentionthe fins of theevaporator.

The fins ofthe evaporator may hurtthe hand.

·Drive upthe wine cooler when moving it. Pushing it may damage the floor.

Cover a protector board on the easydamagefloor.

2. Electricalcircuitdiagram.

Andere Handbücher für WC6217

Inhaltsverzeichnis

Andere Caple Weinkühler Handbücher

Beliebte Weinkühler Handbücher anderer Marken

U-Line

U-Line Echelon Wine Captain 2075WC Betriebsanleitung

Haier

Haier WS50GA Bedienungsanleitung

Cavist

Cavist 62 Bedienungsanleitung

Kenmore

Kenmore 461.99130 Bedienungsanleitung

Miele

Miele KWT 6422 iG Bedienungsanleitung

Danby

Danby DWC113BLSDB Bedienungsanleitung

Avanti

Avanti WC1001 Bedienungsanleitung

Frigidaire

Frigidaire FFWC38F6LS Bedienungsanleitung

Titan

Titan TT-W2454SZ Installationshandbuch

Klarstein

Klarstein Botella 166 Uno Bedienungsanleitung

Costway

Costway FP10130WL Bedienungsanleitung

Lemair

Lemair LWC59 Bedienungsanleitung

Haier

Haier JC-125GEA Bedienungsanleitung

Climadiff

Climadiff CLI24 Kurzanleitung

Viking

Viking VCWB301LSS Bedienungsanleitung

Vinvautz

Vinvautz VZ08BHK Bedienungsanleitung

AVG

AVG PRYMO PMB76SS Bedienungsanleitung

Viking

Viking PURHK30BR Bedienungsanleitung