Cardinal Detecto 6855 Bedienungsanleitung

Waist-High

Stand-On Scale

Models 6855, 6855KGEU

6856 & 6856KGEU

Operating Instructions

CARDINAL SCALE MFG. CO.

1930-M458-O1 Rev B PO BOX 151 •WEBB CITY, MO 64870 Printed in USA

03/04 PH (417) 673-4631 •FAX (417) 673-5001

Web Site - http://www.detectoscale.com

WAIST-HIGH STAND-ON SCALE

Thank you for purchasing our model 6855 (6855KGEU) or 6856 (6856KGEU) Waist-High

Stand-On Scale. It has been manufactured with quality and reliability at our factory in Webb

City, MO USA. Your scale has been tested before leaving our factory to insure accuracy and

dependability for years to come.

This manual is provided to guide you through the operation of your scale. Please read it

thoroughly before attempting to operate your scale and keep it handy for future reference.

FCC COMPLIANCE STATEMENT

WARNING! This equipment generates, uses and can radiate radio frequency and if not

installed and used in accordance with the instruction manual, may cause interference to radio

communications. It has been tested and found to comply with the limits for a Class A

computing device pursuant to Subpart J of Part 15 of FCC rules, which are designed to provide

reasonable protection against such interference when operated in a commercial environment.

Operation of this equipment in a residential area may cause interference in which case the

user will be responsible to take whatever measures necessary to correct the interference.

You may find the booklet "How to Identify and Resolve Radio TV Interference Problems"

prepared by the Federal Communications Commission helpful. It is available from the U.S.

Government Printing Office, Washington, D.C. 20402. Stock No. 001-000-00315-4.

any manner, is prohibited. No patent liability is assumed with respect to the use of the information contained

herein. While every precaution has been taken in the preparation of this manual, the Seller assumes no

responsibility for errors or omissions. Neither is any liability assumed for damages resulting from use of the

information contained herein. All instructions and diagrams have been checked for accuracy and ease of

application; however, success and safety in working with tools depend to a great extent upon the individual

accuracy, skill and caution. For this reason the Seller is not able to guarantee the result of any procedure

contained herein. Nor can they assume responsibility for any damage to property or injury to persons occasioned

from the procedures. Persons engaging the procedures do so entirely at their own risk.

SPECIFICATIONS

6855 6855KGEU 6856 6856KGEU

Capacity ………...…… 600 lb x .2 lb or

270 kg x .1 kg

(selectable)

270 kg x .1 kg

800 lb x .2 lb or

360 kg x .1 kg

(selectable)

360 kg x .1 kg

Platform Size ..…..…. 18” x 14” / 457 mm x 356 mm 24” x 24” / 610 mm x 610 mm

Shipping Weight ……. 70 lb / 32 kg 85 lb / 39 kg

Scale Height ..………. 41.69 / 1059 mm

Display ..…………….. 0.7” / 17.8 mm high-contrast LCD

Power ..…………….... 6 “C” size Alkaline batteries (not included) or optional AC adapter

Keys ..………………... On/Off, Zero, Lb/Kg, Hold/Release

Features …………….. Body Mass Index Calculator

UNPACKING INSTRUCTIONS

• Remove staples or cut along bottom of carton. Lift carton off pallet.

• Check for any damage incurred in shipping. If scale has been damaged, place a claim

with the carrier. It is the responsibility of the purchaser to file all claims for any damages

or loss incurred during transit. Use the original carton and shipping material to return

the scale.

• Cut packing straps securing scale to pallet.

• To remove scale from pallet, at the back of the scale lift up with equal force from the

column and at the platform base near the wheels on the scale. Set gently on floor.

• Remove all plastic wrapping, foam fillers and cardboard material from the scale.

• Remove and unpack the power supply and cord, if the scale was ordered with this

option.

CARE and CLEANING of SCALE

• DO NOT subject the platform to sudden shocks.

• DO NOT spray water directly on the display head.

• DO avoid areas where the scale might be exposed to moisture.

• DO NOT use abrasive cleaners on this instrument.

• DO NOT use acetone or other volatile solvents for cleaning.

• DO clean the scale using a damp soft cloth and mild detergent.

ERROR and STATUS DISPLAYS

Display Meaning

A::Aa General error, invalid keypad entry was attempted.

A$Aa Attempting to display a negative number greater than –9,999 or a

positive number greater than 99,999

A<:"Aa Indicates an attempt to zero a weight outside the scale zero range.

(See Four Percent Zero Tracking Range Limit).

A(1+Aa Motion is present when the indicator is attempting to perform one of the

following operations: Power Up Zero or Zero Weight Display

4::a An analog to digital convertor communication error has been detected.

Consult the scale service representative.

".3a Indicates improper stored calibration data, calibration is necessary.

::a The analog to digital sample is invalid.

::"a The load cell input is below the range of the indicator.

:: a The load cell input is above the range of the indicator.

a::a NOVRAM failure. Consult the scale service representative.

$%a Scale weight exceeds scale capacity

$a Displayed to indicate the indicator is turning off.

OPERATING INSTRUCTIONS

1. Install six (6) “C” size Alkaline

batteries or if ordered with the

scale, plug the power supply

module into an appropriate power

receptacle. Plug the small

connector end of the power supply

cord into the power jack located in

the bottom right corner at the back

of the indicator.

2. Set the scale on any hard, level,

flat surface or low-cut carpet.

3. With no weight on the scale

platform, press the [ ON/OFF ]

key. After a second or so the

display should indicate a zero

weight with the ZERO annunciator

turned on. If the display does not

indicate zero, press the [ ZERO ]

key to zero the weight display.

4. Step on the scale and remain

motionless for several seconds

until the scale displays your

weight.

5. To re-zero the scale, remove all

weight from the platform and

press the [ ZERO ] key.

6. For more information, see the

758C Series Operation Manual

(8555-M210-O1).

758C Keypad

Indicator

Column

Platform

Optional

Powe

Supply

Module

NOTE! If you wish to

operate the indicator from

batteries, you must first

obtain the batteries.

Height Rod Instructions

Height Rod Hole Location

• Please check Height Rod hole locations

before installing Height Rod.

• Some models may require holes to be

drilled.

• Please follow the measurements for drilling

holes if necessary.

• After holes have been drilled, please follow

installation instructions.

• Install the two (2) #10 x ½” hex head screws

from the hardware pack into the column.

IMPORTANT!

Measure from top

of scale base.

Height Rod Installation Instructions

1. Remove Height Rod from shipping container.

Inspect the unit for signs of damage. Contact

our Customer Service Department if

necessary.

2. Loosen screws located on front of scale

column. Place height rod brackets over

screws and pull down; securing brackets.

Tighten screws as needed.

NOTE! The Indicator must be facing away from

the scale platform to install the height rod.

Height Rod Operation

1. Raise the inner rod of the telescoping column.

2. Lift up the spoon and lower the inner rod until

the spoon rests on the patient’s head.

CAUTION! Do not raise or lower Height Rod

by spoon tip!

3. Read the correct height measurement on the

inner rod at the top of the outer rod.

1” from edge

of column to

center of hole

#29 (.136)

diameter

holes

4 1/8”

28 5/8”

PART IDENTIFICATION

ITEM

NO. QTY

6855 QTY

6856 PART

NUMBER DESCRIPTION

1 1 1930-D330-0A WEIGHBRIDGE ASSY

1 1930-D445-OA WEIGHBRIDGE ASSY (6856)

2 1 1930-C338-08 MAT W/ADHESIVE

1 1930-C452-08 MAT W/ADHESIVE (6856)

3 6 6 6007-0034 HEX HEAD SCREW 5/16-18 UNC-2A X 3/4”

4 6 6 6024-0050 LOCK WASHER 5/16”

5 6 6 6013-0275 HEX NUT 5/16-18 UNC-2B

6 1 1930-C143-0A HANDRAIL ASSEMBLY

1 1930-C450-0A HANDRAIL ASSEMBLY (6856)

7 1 1 758C DIGITAL INDICATOR

8 1 1 0033-B164-08 MOUNTING BRACKET

9 4 4 6021-0665 MACHINE SCREW #6-32 X .375 PAN HD PHILLIP DR

10 1 1 391RV204 ELASTIC STOP NUT

11 1 1 6680-1043 GROMMET

12 1 1 1930-B336-1A COLUMN ASSEMBLY

13 1 1930-C337-08 COVER

1930-C451-08 COVER (6856)

14 1 1 6024-0047 EXT STAR WASHER 1/4”

15 1 1 6007-0007 HEX HEAD SCREW 1/4-20 UNC-2A X 3/8”

16 1 1 0033-B110-08 UHMW DISK

17 1 1 6024-0004 FLAT WASHER 1/4” DIA SS

18 1 1 1930-B428-0ACABLE

19 1 1 6021-1454 HEX HEAD BOLT 1/4-20 UNC-2A X 3/4”

20 1 1 0033-C090-0A WHEEL ASSY.

21 2 2 6013-0045 HEX NUT 1/4-20 UNC

1 1 3502-C205-0A TRIM BOARD

Andere Handbücher für Detecto 6855

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cardinal Skala Handbücher

Cardinal

Cardinal DS Series Bedienungsanleitung

Cardinal

Cardinal Detecto 6855KGEU Bedienungsanleitung

Cardinal

Cardinal PD150 Bedienungsanleitung

Cardinal

Cardinal CS Series Bedienungsanleitung

Cardinal

Cardinal 777 Bedienungsanleitung

Cardinal

Cardinal APSWIFI Benutzerhandbuch

Cardinal

Cardinal 243 Bedienungsanleitung

Cardinal

Cardinal APS Bedienungsanleitung

Cardinal

Cardinal Detecto 6027 Series Bedienungsanleitung

Cardinal

Cardinal Detecto MARINER WPS10 Bedienungsanleitung

Cardinal

Cardinal Floor Hugger FHLT Series Bedienungsanleitung

Cardinal

Cardinal 6745 Bedienungsanleitung

Cardinal

Cardinal Detecto 854F Series Bedienungsanleitung

Cardinal

Cardinal Detecto C Series Bedienungsanleitung

Cardinal

Cardinal Detecto MARINER WPS10 Bedienungsanleitung

Cardinal

Cardinal DR550C Bedienungsanleitung

Cardinal

Cardinal Detecto 6855 Bedienungsanleitung

Cardinal

Cardinal Detecto SlimPRO Bedienungsanleitung

Cardinal

Cardinal 225 Bedienungsanleitung

Cardinal

Cardinal HS25KGP Bedienungsanleitung

Cardinal

Cardinal Detecto PS-5 Bedienungsanleitung

Cardinal

Cardinal Physician’s Scale Bedienungsanleitung

Cardinal

Cardinal 6127 Series Bedienungsanleitung

Cardinal

Cardinal Detecto 8430 Series Bedienungsanleitung

Beliebte Skala Handbücher anderer Marken

AWS

AWS ZEO-50 Bedienungsanleitung

Gima

Gima Glass Body Fat Analyzer Stücklistenhandbuch

Seca

Seca 374 Bedienungsanleitung

TEC

TEC TEC SL59 SERIES Bedienungsanleitung

Axis

Axis B/E Series Bedienungsanleitung

Alecto

Alecto ACW-40 Bedienungsanleitung

Rice Lake

Rice Lake MSI-4260 IS Bedienungsanleitung

IKA

IKA RCT basic safety control Bedienungsanleitung

ADE

ADE M20011 Bedienungsanleitung

Duronic

Duronic KS3000 Bedienungsanleitung

Digi

Digi SM-720 Bedienungsanleitung

Korona

Korona Kastella Bedienungsanleitung

A&D

A&D FC-50Ki Bedienungsanleitung

BDA

BDA CAMARGUE Bedienungsanleitung

Tanita

Tanita HD-357 Bedienungsanleitung

Leifheit

Leifheit 03173 Bedienungsanleitung

Lumme

Lumme LU-1340 Bedienungsanleitung

Fidelity Electronics

Fidelity Electronics G2e Bedienungsanleitung