Cardo Systems Scala 700 Bedienungsanleitung

scala-700TM

QUICK GUIDE

COMPONENTS

Wheel

USB

Charging

Jack

Speaker

Control

Button

Ear

Loop

Status

Light

INTRODUCTION

This quick guide will assist

you with the use of the scala-

700 headset. For more

detailed information please

download the User Manual

from our website at

www.cardowireless.com.

Before using the scala-700 we

recommend that you

familiarize yourself with the

Bluetooth®functionality of

your cellular phone. See the

User Manual for safety

information.

IMPORTANT: Please visit

www.cardowireless.com/FAQ.php

to check whether your particular

cellular phone has any Bluetooth

related bugs that may affect its

operability with your headset.

scala-700TM

BEFORE USING

1. Make sure that the headset is fully charged for at least four hours

before initial use.

2. To charge the headset, plug the charger into the headset’s Charging

Jack, which is located just below the Wheel.

3. While charging, the red Status Light illuminates. When charging is

completed the light will turn off.

NOTE: Plugging in the charger turns off the headset. You must

turn on the headset after charging.

When plugging the headset into the charger, it may take up to

15 seconds before the red Status Light turns on.

GENERAL INSTRUCTIONS

All headset functions are controlled either by:

• Pressing the Control Button either for a short period of less than a

second, or a long period of over three seconds,

• Moving the Wheel up or down, or by pressing it inwards.

scala-700TM

TURNING THE HEADSET ON FOR THE FIRST TIME

In order for your headset to work with your cellular phone, they must

first recognize each other. This process is called “pairing”, and only

needs to be performed once for each phone.

1. To initiate pairing, press the Wheel for at least 8 seconds while the

headset is turned off. The Status Light will flash red and blue indicating

that the headset is in pairing mode.

2. Turn on your phone and make sure that its Bluetooth function is

activated.

3. Search for Bluetooth devices on your phone by following the phone’s

instructions.

4. After a few seconds the phone will list the scala-700 as a “discovered

device”. Select it and follow your phone’s instructions to accept the

pairing.

5. When prompted, enter 0000 (four zeros) as your PIN or passkey.

6. Your phone will confirm that pairing has succeeded.

Note: If pairing is not completed within two minutes the headset

will return to standby mode.

scala-700TM

You can enter pairing mode at any time by pressing the Wheel

for at least 8 seconds while the headset is turned off

Your Headset can pair with up to eight phones, and will automatically

connect to the last phone connected to the Headset. To connect to a

different phone go to the Bluetooth menu of the active mobile phone

and disconnect the Headset. Now go to the Bluetooth menu of the

desired phone and connect the Headset to this phone.

ATTACHING THE HEADSET TO YOUR EAR

Attach the Headset to your ear using the Ear-Loop. Insert the pin of the

Ear-Loop to a suitable depth so that the speaker fits snugly into your

ear (hovering above your ear canal), then bend the flexible bow of the

Ear-Loop to produce a snug but comfortable fit.

SWAP BETWEEN TWO ACTIVE MOBILE PHONES

The scala-700 allows you to swap, i.e. to alternately use one among the

last two phones to which it has been connected.

While both phones are turned on and the headset is on standby, double-

press the wheel. Now the Headset will switch to the second phone.

Each time you double-press the wheel, the alternate phone connects

to the Headset.

scala-700TM

FUNCTIONS

DESIRED RESULT: REQUIRED ACTION:

Turn on the headset Press the Wheel steadily for at least 3 seconds

Turn off the headset Press the Wheel steadily for at least 3 seconds

Answer a call Short press the Control Button

NOTE: Wait until you hear the incoming call on

the headset (not only on the phone) before

pressing the Control Button

Reject an incoming call Long press the Control Button

Terminate a call Short press the Control Button

Increase the volume Move the Wheel up by steps. When you hear a beep,

it is at maximum.

Decrease the volume Move the Wheel down by steps. When you

hear a beep it is at minimum.

Mute/Un-mute During a call, short press the Wheel inwards

Transfer a call to the phone During a call, long press the Control Button

Voice Dial During standby, short press the Control button

and state the name of the person you wish to

call (after a tone is heard).

Note that your mobile phone must support the

voice dial feature.

Redial Short press the Wheel

Accept call waiting or During an active call and one call on hold or waiting,

swap between calls short press the Wheel.

Conference call During an active call and one call on hold, long

press the Wheel

scala-700TM

FUNCTIONS (continued)

DESIRED RESULT: REQUIRED ACTION:

Locate the headset Activate the Buzzer as follows: Dial a call with the

(Buzzer Function) mobile phone and press Send/Talk. While the call is

in progress, begin pressing the mobile phone volume

buttons up, then down repeating the up/down

sequence four or more times. The headset will start

buzzing.

Lock/Unlock buttons In standby, simultaneously press the Wheel and the

Control button for at least 3 seconds.

BATTERY MONITOR

To check the status of the headset’s battery, press the Control Button

for at least 7 seconds while the headset is on Standby position. The

Status Light will flash for 2 seconds as follows:

• Blue Fully charged

• Red and Blue Medium charge

• Red Weak charge

DISABLING / ENABLING THE STATUS LIGHT

To disable/enable the Status Light, while the Headset is on Standby,

move the Wheel down and hold for at least three seconds. The Status

Light will stop/begin flashing, depending on whether you are

disabling/enabling the Status Light.

scala-700TM

CHANGING THE WHEEL ORIENTATION

When changing volume, the default configuration of the headset is for

it to be worn on the right ear. This means that clicking up on the Wheel

towards the small ‘+’ sign on the headset increases the volume one step

at a time, while clicking down towards the ‘-’ sign on the headset

decreases the volume one step at a time.

If you wear the headset on your left ear, this headset allows you to

change the Wheel orientation from right to left ear, so that pressing the

Wheel up still increases the volume, and pressing down decreases the

volume.

In order to set the headset for left ear orientation: Power on the Headset

by pressing and holding the Control button while pressing in and holding

the Wheel for 4 seconds. Once you see 3 blue flashes, the headset is

powered on and you may release the buttons.

NOTE: The headset will revert to its default right ear configuration once

it is turned off. In order to regularly use the headset in left ear configuration,

always turn on the headset using the Control + Wheel procedure above.

NOTE: If you choose to wear the headset on your left ear but do not

with to change the Wheel orientation, the Wheel will function in the

reverse order, i.e. turning down will increase volume, turning up will

decrease volume.

scala-700TM

LOCATE THE HEADSET (Buzzer Function)

The scala-700 allows you to locate the headset by activating a buzzer.

Activate the Buzzer as follows: Dial a call with the mobile phone and

press Send/Talk. While the call is in progress, begin pressing the mobile

phone volume buttons up, then down, repeating the up/down sequence

four or more times. The headset will start buzzing.

STATUS LIGHTS

The Headset uses the following Status Lights to display its status

Status Light Status

None Headset is off or Status Light is disabled

3 blue flashes Powered on successfully

3 red flashes Powered off successfully

Alternating Red/blue flashes Pairing mode

1 blue flash every 3 seconds Standby – No call in progress

2 blue flashes every Call being initiated or in progress

3 seconds

1 red flash every 3 seconds Standby and battery is low

2 red flashes every 3 seconds Call being initiated or in progress and battery is low

Steady red Headset is being charged

scala-700TM

AUDIO TONES

With the exception of the actions described in the following table, all

actions are followed by a single tone to confirm that the headset has

accepted the action.

Action Tone

Mute On/off tone and mute reminder tone every 20

seconds

Volume up Tone on maximum volume

Volume down Tone on minimum volume

Locate the headset Buzzing

TROUBLESHOOTING

Note: For most problems, it is recommended as a first step that you

turn the headset off for 20 seconds and then on again. If this does

not help, try pairing the headset and phone again.

Problem Action

Pairing fails 1. Delete scala-700 from your paired

device list in your phone (if it is listed).

2. Turn off the mobile phone and headset.

3. Take the battery out of the phone and

put it back.

4. Repeat the pairing process as described

in TURNING THE HEADSET ON FOR

THE FIRST TIME section above.

scala-700TM

Can’t answer phone calls or (Assuming your mobile phone supports

perform voice dialing Voice Dialing) :

1. Make sure your headset is turned ON

and in standby mode while the blue light

indicator flashes slowly.

2. Verify that the Bluetooth function on your

phone is set to ON.

3. Verify that the scala-700 is the correctly

paired headset to your mobile phone

(refer to the phone manual).

4. Link the headset to the phone as

described above.

5. Check “Definitions” or “Settings” on your

mobile phone.

6. Perform the pairing process and check

again.

Battery does not provide at Make sure your headset is fully charged.

least six hours of talk time. Charging time is up to 3 hours for an empty

battery. When fully charged and charger is

connected to headset, the red light indicator

turns off.

Andere Handbücher für Scala 700

Inhaltsverzeichnis

Andere Cardo Systems Headset Handbücher

Cardo Systems

Cardo Systems PACKTALK Bedienungsanleitung

Cardo Systems

Cardo Systems Scala Rider Freecom 2 Bedienungsanleitung

Cardo Systems

Cardo Systems G9 Powerset Bedienungsanleitung

Cardo Systems

Cardo Systems SCALA RIDER TEAMSET Bedienungsanleitung

Cardo Systems

Cardo Systems scala rider Q-solo Bedienungsanleitung

Cardo Systems

Cardo Systems Scala rider Q-Solo Bedienungsanleitung

Cardo Systems

Cardo Systems SCALA RIDER G4 POWERSET Bedienungsanleitung

Cardo Systems

Cardo Systems FREECOM 1 Bedienungsanleitung

Cardo Systems

Cardo Systems Packtalk black Bedienungsanleitung

Cardo Systems

Cardo Systems Scala Rider MultiSet Q2 Bedienungsanleitung

Cardo Systems

Cardo Systems Scala-rider Scala Rider Bedienungsanleitung

Cardo Systems

Cardo Systems SCALA RIDER G4 Bedienungsanleitung

Cardo Systems

Cardo Systems Spirit HD Bedienungsanleitung

Cardo Systems

Cardo Systems PACKTALK EDGEPHONES Bedienungsanleitung

Cardo Systems

Cardo Systems SCALA RIDER Bedienungsanleitung

Cardo Systems

Cardo Systems FREECOM 2x Bedienungsanleitung

Cardo Systems

Cardo Systems SPIRIT Bedienungsanleitung

Cardo Systems

Cardo Systems SCALA RIDER Q2 PRO Bedienungsanleitung

Cardo Systems

Cardo Systems ScalaRider Bedienungsanleitung

Cardo Systems

Cardo Systems Scala-rider Q2 Bedienungsanleitung

Cardo Systems

Cardo Systems S-640 Bedienungsanleitung

Cardo Systems

Cardo Systems PACKTALK Bedienungsanleitung

Cardo Systems

Cardo Systems SCALA RIDER FM - Bedienungsanleitung

Cardo Systems

Cardo Systems SCALA RIDER SOLO Bedienungsanleitung

Beliebte Headset Handbücher anderer Marken

Sena

Sena SMH10 Bedienungsanleitung

IASUS

IASUS Stealth IA-NT4-BASIC-BT Bedienungsanleitung

Sennheiser

Sennheiser EPOS ADAPT 230 Bedienungsanleitung

Doro

Doro Flexus HS2005 Bedienungsanleitung

GE 98971 Bedienungsanleitung

Hama

Hama 00184070 Bedienungsanleitung

Plantronics

Plantronics Blackwire 3200 Series Bedienungsanleitung

Blue Tiger

Blue Tiger Advantage PLUS Bedienungsanleitung

Jawbone

Jawbone Icon Bedienungsanleitung

Jabra

Jabra FR 20 Bedienungsanleitung

Roxcore

Roxcore Flow A+ Bedienungsanleitung

Turtle Beach

Turtle Beach XP 510 Bedienungsanleitung

Philips

Philips SHB6101 Bedienungsanleitung

Jabra

Jabra PRO 9460 Duo Bedienungsanleitung

HyperX

HyperX HyperX Cloud Flight Bedienungsanleitung

Bose

Bose MIE2 Mobile Bedienungsanleitung

Jabra

Jabra Steel Bedienungsanleitung

HyperX

HyperX cloud ii Bedienungsanleitung