Cardo Systems Packtalk NEO Bedienungsanleitung

CONTENTS

1. Introduction 3

2. GettingStarted 4

2.1 Getting to Know Your PACKTALK NEO 4

2.2 Charging Your PACKTALK NEO 4

2.3 Switching Your Unit On/Off 5

2.4 Using Your PACKTALK NEO 5

2.5 Pairing Your Unit to Bluetooth Devices 5

3. CardoConnectApp 8

3.1 Registering Your unit 8

3.2 Updating Your Unit 9

4. OntheRoad 10

4.1 Basic Audio Functions 10

4.2 Making and Receiving Phone Calls 11

4.3 Streaming Music 12

4.4 Listening to FM Radio 14

4.5 Voice Commands 16

5. RidingwithOthers 18

5.1 DMCIntercom 18

5.1.1 Setting Up and Using DMC Intercom Groups 18

5.1.2 Using DMC Intercom 20

5.2 Bluetooth Intercom 22

5.2.1 Setting Up non-DMC Intercom 23

5.2.2 Using the Bluetooth intercom 24

5.3 Sharing Music 25

5.4 Switching between Intercom modes 26

6. Troubleshooting 27

6.1 soft reset 27

6.2 Reset to Factory Settings 27

6.3 FAQ 27

7. PersonalizingYourDevice 28

7.1 Using Parallel Audio Streaming 28

7.2 Audio Source Priorities 29

8. Support 30

1. INTRODUCTION

Thank you for choosing the Cardo PACKTALK NEO communication and entertainment system for motorcycle

helmets.

We wish you a great PACKTALK NEO experience and encourage you to visit the support page regarding any

questions, suggestions or comments you may have.

If you have not yet installed the PACKTALK NEO unit on your helmet, please install it as described in the

Installation Guide provided in the package. You can also watch the installation video accessible on this link.

For easy reference while on the road, download the Pocket Guide here.

Before using your unit for the first time, download the Cardo Connect App and follow the on-screen instructions

to update your PACKTALK NEO to the latest software.

This is version 1.0 of the PACKTALK NEO Manual. The latest version of the manuals in your preferred

language and various tutorials can be found here.

2. GETTING STARTED

2.1 GETTING TO KNOW YOUR PACKTALK NEO

2.2 CHARGING YOUR PACKTALK NEO

Make sure that your PACKTALK NEO battery is charged for at least 4 hours before initial use.

To charge the unit:

1. Using the supplied USB cable, connect your computer or wall charger to the USBport on your PACKTALK

NEO.

2. Fast charging:

●You will have 2 hours of talk time after 20 minutes of charging. (1.5 - 2 hours for full charge).

3. Charge while riding:

In case you need to charge it, connect your unit to a power outlet. You can continue charging while riding.

The battery of your PACKTALK NEO supports up to 13 hours of talk-time.

While charging, the LED indicates the charging status as follows:

●Red LED on — charging

●Red LED off — charging complete

TIP: You can check the battery charge at any time in the Cardo Connect App, or by saying "Hey Cardo,

battery status".

2.3 SWITCHING YOUR UNIT ON/OFF

To switch your PACKTALK NEOon:

●Press both and for 2 seconds.

The speaker plays a startup sound.

The LED confirms your PACKTALK NEO is on:

●Normal battery — LED flashes blue once, then green

●Low battery — LED flashes blue three times, then green

●Charging — LED flashes red and green

To switch your PACKTALK NEO off:

●Press and for 2 seconds.

The LED flashes red three times, confirming that your unit is switching off. The speaker plays a sound and

a voice message indicates the battery status, "Battery Status X%, ".

2.4 USING YOUR PACKTALK NEO

You can operate the various features of your PACKTALK NEO in the following ways:

●Press a button or a combination of buttons on the unit

●Use the Cardo Connect App on your mobile device (once it is paired with the unit)

●Use natural voice operation (by saying a command, for example "Hey Cardo, Radio On"

2.5 PAIRING YOUR UNIT TO BLUETOOTH DEVICES

Your PACKTALK NEO has two Bluetooth channels for connection to Bluetooth devices such as mobile

phones, GPS devices, and TFTBike Infotainment.

To connect your unit to a Bluetooth device, you must first pair them. Once paired, they automatically recognize

each other whenever they are within range.

●If you are pairing the unit to more than one mobile phone, the phone paired with channel 1 is the default

phone for outgoing calls.

To pair to a mobile phone:

1. Enable Bluetooth on your mobile phone.

2. On the unit in standby mode, press for 5 seconds.

The LED flashes red and blue.

3. On your mobile phone, search for Bluetooth devices.

4. When your PACKTALK NEO appears in the list of available devices, select it.

If prompted for a PIN or Passkey, enter 0000 (four zeros). If prompted to allow pairing on your phone,

allow it.

The phone confirms that pairing has succeeded and the LED flashes purple for 2 seconds. A voice

message confirms "Phone connected".

To stop phone pairing:

To pair to another Bluetooth device:

1. Enable Bluetooth on the device (for example, your second mobile phone, GPS device., or TFT).

2. On the unit in standby mode press for 5 seconds.

The LED flashes red and blue rapidly.

3. Depending on the Bluetooth device:

a. For a GPS, tap once.

b. For a TFT, roll the control wheel backward.

c. For a second phone, roll the wheel forward.

The led flashes red and green.

4. On the device you are pairing, search for Bluetooth devices.

5. When your PACKTALK NEO appears in the list of available devices, select it.

If prompted for a PIN or Passkey, enter 0000 (four zeros). If prompted to allow pairing on your phone,

allow it.

The device confirms that pairing has succeeded and the LED flashes purple for 2 seconds.

●If pairing is not completed within 2 minutes, the unit automatically returns to Standby.

●Not all Bluetooth GPS devices allow connection to Bluetooth audio devices. Consult your GPS User

Manual for more information.

3. CARDO CONNECT APP

The Cardo Connect App enables you to configure the settings of your PACKTALK NEO. In addition, the App

offers you remote controlled operation from the screen of your smartphone.

3.1 REGISTERING YOUR UNIT

1. Download the Cardo Connect App.

2. Register your PACKTALK NEO.

3. Select your language.

3.2 UPDATING YOUR UNIT

Before using your unit for the first time, and whenever a new software update is available, make sure to have

the latest software update. Updating with the latest software keeps your unit free of bugs and provides you with

additional new functionalities.

Your PACKTALK NEO can be updated Over the Air, via Cardo Connect app.

To update your PACKTALK NEO unit with the Cardo Connect App:

Whenever a new software update is available, a pop-up will open on your App screen. Press Install and follow

the on-screen instructions.

If you press Remind me later, the pop-up will re-open the next day.

To update your PACKTALK NEO:

1. Open Cardo Connect app.

2. Press Settings.

3. Select your unit.

4. Select the software version.

5. Press Update Now.

When the update is finished, press Finish to go back to the main screen.

To update your PACKTALK NEO unit with your computer:

1. Download and install the Cardo Update tool https://www.cardosystems.com/update.

2. Open Cardo Update.

3. Register (first time only).

4. Connect the unit to the computer using an USB cable and update the firmware.

Cardo Update on Windows/Mac - minimum requirements - Windows® 7/macOS x10.8.

4. ON THE ROAD

PACKTALK NEO makes it easy for you to receive phone calls and listen to music in a convenient and safe

manner.

4.1 BASIC AUDIO FUNCTIONS

The basic audio functions are the same whether you are listening to music, speaking on the intercom, or

having a phone conversation.

To turn the volume up:

●Roll the Control Wheel forwards.

An increasingly louder tone is played on the speaker until you reach the maximum volume, as indicated by

the maximum volume tone.

To turn the volume down:

●Roll the Control Wheel backwards.

An increasingly quieter tone is played on the speaker until you reach the minimum volume, as indicated by

the minimum volume tone.

To mute the microphone completely:

●Tap simultaneously on and the intercom button .

To unmute the microphone:

●Tap simultaneously on and the intercom button .

Andere Handbücher für Packtalk NEO

Inhaltsverzeichnis

Andere Cardo Systems Gegensprechanlage Handbücher

Cardo Systems

Cardo Systems Freecom 4 Plus Bedienungsanleitung

Cardo Systems

Cardo Systems PACKTALK CUSTOM Bedienungsanleitung

Cardo Systems

Cardo Systems FREECOM 1 Plus Bedienungsanleitung

Cardo Systems

Cardo Systems FREECOM 1+ Bedienungsanleitung

Cardo Systems

Cardo Systems FREECOM 1 Plus Bedienungsanleitung

Cardo Systems

Cardo Systems PRO1 Bedienungsanleitung

Cardo Systems

Cardo Systems cardo BK-1 Bedienungsanleitung

Cardo Systems

Cardo Systems SHO-1 Bedienungsanleitung

Cardo Systems

Cardo Systems G9 Powerset Bedienungsanleitung

Cardo Systems

Cardo Systems FREECOM 4+ Bedienungsanleitung

Cardo Systems

Cardo Systems SMARTH Bedienungsanleitung

Cardo Systems

Cardo Systems Spirit HD Bedienungsanleitung

Cardo Systems

Cardo Systems FREECOM 4+ Bedienungsanleitung

Cardo Systems

Cardo Systems Scala Rider G9 Bedienungsanleitung

Cardo Systems

Cardo Systems PACKTALK Bedienungsanleitung

Cardo Systems

Cardo Systems PACKTALK CUSTOM Bedienungsanleitung

Beliebte Gegensprechanlage Handbücher anderer Marken

Bticino

Bticino LINEA 3000 Bedienungsanleitung

MSI

MSI MSI-140 Bedienungsanleitung

golmar

golmar Stadio Plus Bedienungsanleitung

CyberData

CyberData 011211 series Handbuch

Vidos

Vidos duo M1021 Bedienungsanleitung

Vimar

Vimar ELVOX 7539/E Bedienungsanleitung

SSS Siedle

SSS Siedle BTSV 850-03 Bedienungsanleitung

Dahua

Dahua VTO Series Bedienungsanleitung

Elvox

Elvox 5651 Bedienungsanleitung

Videx

Videx VIDEOKIT Series Bedienungsanleitung

Rocom

Rocom Doortello Business FW T2.05W2.04 Bedienungsanleitung

Viking

Viking E-35-EWP Bedienungsanleitung

Safeguard Supply

Safeguard Supply LRA-EX1000 Bedienungsanleitung

SSS Siedle

SSS Siedle BFCV 850 Series Bedienungsanleitung

GRD

GRD MAX V2 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Aiphone

Aiphone IE-8MD Bedienungsanleitung

Perel

Perel EDB4 Bedienungsanleitung