Carel MCH200TSV0 Bedienungsanleitung

5575

GND

PC485KIT00

PCGATE...

1..

...n

Cavo telefonico

RJ12– Power supply

RS485 24 Vac

–+GND

Cavo telefonico

RJ12– Power supply

RS485 24 Vac

–+GND

max. 1 km

MCH200TSV0: Opzione RS485 per MCH200T*00 / RS485 option for MCH200T*00

cod. +050002885 - rel. 1.0 - 21.04.2004

Vi ringraziamo per la scelta fatta, sicuri che sarete soddisfatti del

vostro acquisto.

L’adattatore MCH200TSV0 permette di collegare alla rete di supervisione

un controllo µC2, qualora la seriale RS485 sia occupata dalla

connessione con il terminale remoto MCH2000T*00.

Montaggio

• scollegare il cavo telefonico dal connettore RJ12 dal retro del

terminale MCH2000T*00;

• aprire la finestrella che copre il pin-strip a 15 vie, utilizzando un

tronchese appuntito (Fig. 3);

• inserire l’adattatore da pin-strip a plug 4 vie rispettando il verso

indicato in figura (il pin 1 è indicato sul terminale da un triangolo).

• eseguire il collegamento della rete RS485 al convertitore ed impostare

il parametro H10 (indirizzo seriale) del µC2al valore desiderato;

• inserire il cavo telefonico.

La linea seriale RS485 va terminata collegando una resistenza, da

120

Ω

1/4 W tra i morsetti + e - (vedi Fig. 2).

ATTENZIONE:

• Fissare adeguatamente l’adattatore al fine di evitare disconnessioni

accidentali.

• Effettuare i cablaggi in assenza di alimentazione.

• Tenere separati i cavi dell’adattatore da quelli di potenza (uscite relè).

Caratteristiche tecniche

Alimentazione

(fornita dal controllo) 5V ± 10%

Condizioni di stoccaggio temperatura -10T70 °C;

umidità 0…80% U.R. non condensante

Condizioni di esercizio temperatura -10T55 °C;

umidità 20…80% U.R. non condensante

Grado di protezione IP20

Inquinamento ambientale normale

Protezione contro le scosse Da incorporare in apparecchiature in

elettriche Classe I o II.

L’isolamento dipende dal controllo a cui

l’opzione è collegata.

Categoria di resistenza

al calore e al fuoco D (UL94 HB)

PTI dei materiali di isolamento 250 V

Morsetto 3 vie sezione conduttori 0,15…1,5 mm2

Cavo da utilizzare coppia di cavi intrecciati con cavo ad

una coppia intrecciata schermo

AWG20-22

Seriale non optoisolata

Velocità 19200 baud

Distanza massima dal

supervisore 1 km

Dimensioni (mm)

Fig. 1

Esempio di connessione

Fig. 2

LEGGI E CONSERVA

QUESTE ISTRUZIONI

READ AND SAVE

THESE INSTRUCTIONS

MC2000T*00

(vista posteriore/rear view)

Adattatore per pin strip

Adapter for pin strip

pin strip 15 vie

15-way pin stri

Conn. RJ12/RJ12 Conn.

MCH200TSV0

(opzionale/optional)

Linea seriale RS485 19200 baud dal supervisore

RS485 serial line 19200 baud from the supervisor

Fig. 3

CAREL S.p.A.

Via dell’Industria, 11 - 35020 Brugine - Padova (Italy)

Tel. (+39) 0499716611 – Fax (+39) 0499716600

http://www.carel.com – e-mail: [email protected]

CAREL si riserva la possibilità di apportare modifiche o cambiamenti ai propri prodotti senza alcun preavviso.

CAREL reserves the right to modify the features of its products without prior notice.

cod. +050002885 - rel. 1.0 - 21.04.2004

Thank you for your choice. We trust you will be satisfied with your

purchase.

The MCH200TSV0 adapter is used to connect a µC2controller to the

supervisor network, if the RS485 serial port is occupied by the

connection to the remote terminal MCH2000T*00.

Assembly

• disconnect the telephone cable from the RJ12 connector at the rear of

the terminal MCH2000T*00;

• open the cover on the 15-way pin strip using a pair of wire cutters

(Fig. 3);

• insert the pin-strip to 4-pin plug adapter in the direction shown in the

figure (pin 1 on the terminal is marked by a triangle).

• connect the converter to the RS485 network and set the parameter H10

(serial address) of the µC2to the desired value;

• insert the telephone cable.

The RS485 serial line should be terminated by connecting a 120

Ω

1/4 W

resistor between the + and - terminals (see Fig. 2).

WARNINGS:

• Carefully fasten the adapter so as to avoid accidental disconnection;

• Connect the wiring with the power supply disconnected;

• Keep the adapter cables separate from the power cables (relay outputs).

Technical specifications

Power supply

(supplied by the controller) 5 V ± 10%

Storage conditions temperature -10T70 °C;

humidity 0 to 80% r.H., non-condensing

Operating conditions temperature -10T55 °C;

humidity 20 to 80% r.H., non-condensing

Index of protection IP20

Environmental pollution normal

Protection against electric To be incorporated in class I or II

shock devices.

The insulation depends on the

controller the option is connected to.

Category of resistance to

heat and fire D (UL94 HB)

PTI of the insulating materials 250 V

3-way terminal wire cross-section 0.15 to 1.5 mm2

Cable to be used twisted pair of twisted pair cables with

shield, AWG20-22

Serial port not optically-isolated

Speed 19200 baud

Maximum distance from the

supervisor 1 km

Connection example

5575

GND

PC485KIT00

PCGATE...

1..

...n

Cavo telefonico

RJ12– Power supply

RS485 24 Vac

–+GND

Cavo telefonico

RJ12– Power supply

RS485 24 Vac

–+GND

max. 1 km

Fig. 1

Fig. 2

MC2000T*00

(vista posteriore/rear view)

Adattatore per pin strip

Adapter for pin strip

pin strip 15 vie

15-way pin stri

Conn. RJ12/RJ12 Conn.

MCH200TSV0

(opzionale/optional)

Linea seriale RS485 19200 baud dal supervisore

RS485 serial line 19200 baud from the supervisor

Fig. 3

Dimensions (mm)

Inhaltsverzeichnis

Sprachen:

Andere Carel Steuereinheit Handbücher

Carel

Carel E5V Bedienungsanleitung

Carel

Carel ir33 DIN Bedienungsanleitung

Carel

Carel Heos Bedienungsanleitung

Carel

Carel E4V Series Bedienungsanleitung

Carel

Carel ir33 Universale Bedienungsanleitung

Carel

Carel PlantWatchPRO Bedienungsanleitung

Carel

Carel PlantWatchPRO Bedienungsanleitung

Carel

Carel Ultracap Bedienungsanleitung

Carel

Carel PCOS00KXN0 Bedienungsanleitung

Carel

Carel UltraCella Kurzanleitung

Carel

Carel EVD0000UC0 Bedienungsanleitung

Carel

Carel E3V-C Series Bedienungsanleitung

Carel

Carel E2V-Z Series Bedienungsanleitung

Carel

Carel E2V-C Bedienungsanleitung

Carel

Carel FLSTDMFC0A Bedienungsanleitung

Carel

Carel PlantWatch Bedienungsanleitung

Carel

Carel EVD0000UC0 Bedienungsanleitung

Carel

Carel E2V S0 Series Bedienungsanleitung

Carel

Carel PCOS00KX Series Bedienungsanleitung

Carel

Carel WM00E-00 Series Bedienungsanleitung

Carel

Carel uC2SE Bedienungsanleitung

Carel

Carel E2V Bedienungsanleitung

Carel

Carel pGD Touch Series Bedienungsanleitung

Carel

Carel EVD0000UC0 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung