Carepeutic KE221 Bedienungsanleitung
_ _ _ Live to Vitality™_ _ _
________________________
Medi-Alert Watch
Instruction Manual
Model: KE221
This user manual provides both operation information of this product and its
detailed specifications. Please read this manual carefully and understand it
thoroughly before operation.
______________________________________________________
___________________________________________________
ByCarepeutic®
2
*** Keep this manual for future reference ***
Attention: This device is designed for private use, not
intended for medical or commercial purpose. Children should be
supervised to ensure that they do not use this device as a toy.
1. Always remove the AC plug from the power outlet after
charging. Not to use this device during charging.
2. Do not use this device in sauna room or bath room, or in
area with high humidity. This product does not have water
proof.
3. Not to let any water / liquid getting into the USB jack on
device.
4. Do not use this product as a substitute for medical attention.
PRODUCT PARTS:
The six digital icons on screen:
Setting Next page or Go to next setting
Up page Down page
Save setting Return to previous page
Four buttons on the side case of watch:
______________________________________________________
___________________________________________________
ByCarepeutic®
3
ÍÎ
•There are 4 buttons on the side case of watch. (A button, M
button, <, >).
•Each button is used as a commander matching the digital
icons on the screen.
CHARGING BATTERY:
1. Low Battery Power:
•When the battery power is low (10% left), the
device will shut off automatically. It is time to do
recharging.
2. Charging the battery:
•The device comes with USB cable and AC adaptor.
You can do charging either through PC by using
only the USB cable or through wall outlet by using
the USB cable with its AC adaptor altogether.
•Always plug in the USB cable to the USB slot on
watch first, and then plug in the cable to PC or to
wall outlet.
•The estimated charging time is about 45 minutes.
______________________________________________________
___________________________________________________
ByCarepeutic®
4
•When it is fully charged, the battery power status
icon on screen is in full green (you can see it after
turning on the device).
•After charging, press and hold the (A button) for
about 5 seconds to turn on the device until you see
the main interface below.
Carepeutic® Medi-alert watch main interface:
(Time, Date, Next alarm reminder time, Temperature, Battery
power status)
Set up Time and Date:
•The watch screen displays the current military time , date ,
next alarm reminder time, temperature, and battery power
status after it is turned on. (Note: before setting up alarm,
the area of "Next 17:10" will display "No Alarm").
•On the above main interface , press and hold the (A
button) for about 5 seconds to get into the interface of
setting time and date for the watch.
______________________________________________________
___________________________________________________
ByCarepeutic®
5
•The screen displays hour and minute interface. Press
or button to choose number for hour; then press
button to choose minute; then press button to
choose year, month, date.
•After it is done , press button to save all information.
The display returns to main interface after information is
saved.
Carepeutic® Medi-alert watch main interface:
(Alarm, User, Weather, Health)
•At the above main interface, press button to get into
the following picture interface.
______________________________________________________
___________________________________________________
ByCarepeutic®
6
•The watch screen displays the four icons of Alarm, User,
Weather, Health. You can continue to press button to
get into next screen for more icons as below (Setting,
Shutdown, Coffee, Cook icons).
•You can press button to return to main interface of
time and date, or press button to get into the next
interface.
Set Up Alarm, User, Weather, Health:
Set Up Alarm:
______________________________________________________
___________________________________________________
ByCarepeutic®
7
•At above picture interface , press or button to
choose the categories (Alarm, User, Weather, Health) that
you want to set up. You can start with Alarm setting.
•After choosing Alarm category, press button to set up
alarms.
•There are 1 to 10 daily alarms that you can set up.
•Start with No01 (first alarm), press button to set up time
for the 1st alarm: Press to do setup, press or
button to choose hour, then press button to
choose minute, press button to choose on/off alarm by
pressing or button to turn On or Off alarm, then
press button to enter alpha message (an option for you
to enter any reminding message such as number of pills to
take or name of drug, doctor, phone number, etc).
To enter alpha message: press or button to choose
first character, then press button to go to next character
and so on until you finish entering all messages. Press
button to save all information, and the setup for first alarm is
done.
•Press button to return to picture interface below.
______________________________________________________
___________________________________________________
ByCarepeutic®
8
Enter User Information:
•Press or button to choose User category, then
press button to get into the User setup interface. You
can see words like Name, Tel, Blood type, etc.
•Press to start entering data. Press button to move
the curser to where you want to enter data (such as after the
Name: ), and press or button to choose character
and press button again to choose next character.
•After entering all data, press button to save all
information.
•Press button to return to picture interface.
Set Up Weather (choosing Fahrenheit degree or Celsius
degree):
(Note: Weather icon only shows current temperature, Choosing Fº
or Cº should be done under the Setting icon).
______________________________________________________
___________________________________________________
ByCarepeutic®
9
•At the above picture interface, keep pressing button
to choose the Setting icon, then press button to get
into Setting interface.
•Under the Setting interface, the screen shows:
______________________________________________________
___________________________________________________
ByCarepeutic®
10
•Press button to start setup. Then press or
button to choose your options and press button to
go to next icon.
•After entering all data, press button to save all
information. Press button to return to picture interface.
Enter Health Information:
•Using the same procedure above to enter any message into
the Health Category section. This section is to let you enter
reminding message such as the food that the patient is not
allowed to eat, blood type, blood pressure, home address,
etc.
•After enter into Health section, you can always delete or
modify existing message.
Inhaltsverzeichnis
