Carlisle BINKS DEVILBISS HAR-600 Bedienungsanleitung

SB-6-147-R2 (1/2021) 1 / 4 www.carlisleft.com

Risk of personal injury.

Risk of property damage.

Except as otherwise speciﬁed by the manufacturer, this product

is speciﬁcally designed for compressed air service and use

with any other ﬂuid (liquid or gas) is a misapplication. For

example, use with or injection of certain hazardous gases in

the system (such as oxygen or liquid pertroleum gas) could

be harmful to the unit or result in a combustible condition

that may cause ﬁre or explosion. Manufacturer’s warranties

are void in the event of misapplication and manufacturer as-

sumes no responsibility for any resulting loss.

Risk of injury. Release all air pressure from system before

servicing system. Be sure to read and understand all Service

Bulletins on the separate components before using the system.

Use only speciﬁed DeVilbiss parts.

IMPORTANT:

Read and follow all instructions and SAFETY PRECAUTIONS before

using this equipment. Retain for future reference.

DESCRIPTION

This regulator has been designed to receive air at main line pressure

and to deliver it at a desired lower regulated pressure.

Speciﬁcations

Air inlet 3/8" NPT(F)

Air outlets 1/4" NPT(F) (3 Ea.)

Air Capacity 60 CFM

Maximum Temp. 150° F

Max. Inlet Pressure 250 psi

Regulator range 0-125 psi

INSTALLATION

1. Maximum inlet pressure and operating temperature ratings are

250 psig and 150° F (intermittent to 180° F).

2. Install as close as possible to where regulated air is needed.

3. Install the unit with the air ﬂowing through the body in the direc-

tion indicated by the arrow.

4. Install the same pipe size unit as the pipe line in use. Avoid using

ﬁttings, couplings, etc., that restrict the air ﬂow, unless maximum

ﬂow is not needed.

5. Regulator may be installed so that adjusting handle is in any

position. Attach gauge to one 1/4" female port.

6. Turning the adjusting screw clockwise increases the regulated

pressure and turning it counterclockwise reduces the regulated

pressure.

IMPORTANT! DO NOT DESTROY

It is the Customer's responsibility to have all operators and service personnel read and understand this manual.

Contact your local Carlisle Fluid Technologies representative for additional copies of this manual.

READ ALL INSTRUCTIONS BEFORE OPERATING THIS PRODUCT.

SERVICE MANUAL

HAR-600 AIR REGULATOR AND GAUGE

HAR-507 AIR REGULATOR

SB-6-147-R2 (1/2021)2 / 4www.carlisleft.com

Ind.

Ref Replacement Parts

No. Part No. Description Req.

1 HAR-507 Regulator 1

2 GA-288 Gauge 1

3 — 1/4" NPT Street Elbow 1

4 VA-542 Ball Valve 1

5 — 1.4" NPT Plug 1

PARTS LIST – Model HAR-600 Regulator and Gauge Assembly

INSTALLATION

Assemble gauge (2), elbow (3), ball valve (4) and plug (5) to

regulator as shown. Use quality pipe sealant or PTFE tape

(not supplied) when installing above components and when

installing regulator to air line piping.

Air Inlet

3/8" NPT

1/4" NPT

Outlet

1/4" NPT

Outlet

Ind.

Ref Replace. Parts

No. Part No. Description Req.

1 — #10-32x9/16 Fillister Hd. Screw 6

2 — Cover 1

3 — Spring Button 1

4 — Diaphragm Spring 1

5 — Body 1

6 — Pipe Plug 1/4" NPT(M) 1

7 KK-4977 Repair Kit (includes # 8 thru 13) 1

8 — Diaphragm Assy. 1

9 — O-Ring 1

10 — Valve 1

11 — O-Ring 1

12 — Spring 1

13 — O-Ring 1

14 — Bottom Plug 1

PARTS LIST – Model HAR-507 Regulator Assembly

697

REGULATOR MAINTENANCE

1. Occasionally remove bottom plug (7) and clean valve

seat (11) and body. Clean parts with denatured alcohol,

wipe off seat and blow out body with compressed air.

2. To disassemble regulator, remove screws, bonnet,

spring and spring button. Diaphragm assembly can

now be removed.

3. Check all O-rings for signs of damage. Replace if

necessary.

4. Reassembly of parts. Insert stem of valve through

hole in regulator body. Install spring and o-rings.

Screw bottom plug into body.

Note

Erratic operation or loss of regulation is usually due

to dirt in the valve area and cleaning is necessary.

If cleaning does not correct the problem, replace

the items included in Repair Kit KK-4977. If unit leaks

air at A, install Repair Kit KK-4977.

SB-6-147-R2 (1/2021) 3 / 4 www.carlisleft.com

NOTES

SB-6-147-R2 (1/2021)4 / 4www.carlisleft.com

WARRANTY POLICY

This product is covered by Carlisle Fluid Technologies’ materials and workmanship limited warranty.

The use of any parts or accessories, from a source other than Carlisle Fluid Technologies,

will void all warranties. Failure to reasonably follow any maintenance guidance provided

may invalidate any warranty.

For specic warranty information please contact Carlisle Fluid Technologies.

Carlisle Fluid Technologies is a global leader in innovative nishing technologies.

Carlisle Fluid Technologies reserves the right to modify equipment specications without prior notice.

BGK™, Binks®, DeVilbiss®, Hosco®, MS®, and Ransburg®

are all registered trademarks of Carlisle Fluid Technologies, Inc.

For technical assistance or to locate an authorized distributor,

contact one of our international sales and customer support locations.

Region Industrial/Automotive Automotive Renishing

Americas Tel: 1-800-992-4657 Tel: 1-800-445-3988

Fax: 1-888-246-5732 Fax: 1-800-445-6643

Europe, Africa,

Middle East, India

Tel: +44 (0)1202 571 111

Fax: +44 (0)1202 573 488

China Tel: +8621-3373 0108

Fax: +8621-3373 0308

Japan Tel: +81 45 785 6421

Fax: +81 45 785 6517

Australia Tel: +61 (0) 2 8525 7555

Fax: +61 (0) 2 8525 7575

For the latest information about our products, visit www.carlisleft.com

Dieses Handbuch passt für folgende Modelle

Andere Carlisle Controller Handbücher

Carlisle

Carlisle MS Elite 461959 B Series Bedienungsanleitung

Carlisle

Carlisle Binks 85-441 Bedienungsanleitung

Carlisle

Carlisle BINKS 85-445 Bedienungsanleitung

Carlisle

Carlisle Binks 107757 Bedienungsanleitung

Carlisle

Carlisle Ransburg 9060 Bedienungsanleitung

Carlisle

Carlisle Binks 85-440 Bedienungsanleitung

Carlisle

Carlisle 81-540 Bedienungsanleitung

Carlisle

Carlisle BINKS 85-448 Bedienungsanleitung

Carlisle

Carlisle DeVILBISS HGB Series Bedienungsanleitung

Carlisle

Carlisle BINKS 85-435 Bedienungsanleitung

Carlisle

Carlisle Binks 84-409 Bedienungsanleitung

Carlisle

Carlisle BINKS 84-520 Bedienungsanleitung

Carlisle

Carlisle Binks 84-407 Bedienungsanleitung

Carlisle

Carlisle Ransburg Bedienungsanleitung

Carlisle

Carlisle Ransburg DynaFlow 77376 Bedienungsanleitung

Carlisle

Carlisle BINKS 85-214 Bedienungsanleitung

Carlisle

Carlisle Ransburg MicroPak 2e Bedienungsanleitung

Carlisle

Carlisle Ransburg 9060 HV2 Bedienungsanleitung

Carlisle

Carlisle BINKS 84-410 Bedienungsanleitung

Carlisle

Carlisle Ransburg DR-1 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch