Carmelli BOUNCEBACK 9' TABLE TENNIS Bedienungsanleitung

NG2325B

BOUNCEBACK 9' TABLE TENNIS

ASSEMBLY INSTRUCTIONS

Please Do Not Hesitate to

Contact Our Consumer Hotline

at 800-759-0977

with Any Questions That May

Arise During Assembly or

Use of This Product!

Ver. 0417

THANK YOU!

Thank you for purchasing this product. We work around the clock and around the globe to ensure

that our products maintain the highest possible quality. However, in the rare case of issues during

assembly or use of this product, please contact our Consumer Hotline at 800-759-0977for immediate

assistance before contacting your retailer. Please read the warranty information at the back of these

assembly instructions for further details.

CARE AND USE

1. This product is intended for INDOORuse only.

2. Do NOT drag the table when moving it, as this will damage the legs.

ASSEMBLY TIPS

1. Find a clean, level surface to begin the assembly of your game table. We recommend that two adults

work together to assemble this game. You may want to carefully cut or tear the four corners of the box

so that the bottom of the box can be used as your work surface.

2. Remove all of the contents from box and verify that you have all of the parts shown on the Parts

List before you begin assembly. Note: Some parts may be pre-installed or pre-assembled.

3. Some figures or drawings may not look exactly like product.

4. When installing parts that have more than one screw orbolt, hand tighten all screws orbolts

in place before final tightening with screwdriver orwrench.

5. Electric screwdrivers may be helpful during assembly; however, please set a low torque and use

extreme caution because screws may be stripped or overtightened, resulting in damaged parts, if the

electric screwdriver’s torque is set too high.

WARNINGS!

READ AND FOLLOW ALL ASSEMBLY, OPERATION AND SAFETY INSTRUCTIONS CAREFULLY.

CHOKE HAZARD - THIS ITEM MAYCONTAIN SMALL BALLS AND PARTS

NOT SUITABLE FOR CHILDREN UNDER 3 YEARS OF AGE.

IMPORTANT! PLEASE READ THESE ASSEMBLY INSTRUCTIONS

IN ENTIRETY BEFORE ASSEMBLING YOUR PRODUCT.

BOUNCEBACK 9' TABLE TENNIS - NG2325B

Parts List

4/17

For replacement parts please call 800-759-0977.

Illustrations Not to Scale

PARTS

HARD

WARE PACK - NGP59421

#5 #7 #9#10

8 MM WASHER

4X12 MM SCREW 8 MM BUSHING

#12

8 MM

LOCKING NUT

#1NGP59311 #2NGP59321 #3NGP59331 #4NGP59341 #6NGP59351

METAL LEG PLATE

#8NGP59361

TABLE SURFACE 1 SAFETY LOCK METAL BRACKET

LINKAGE TUBE

#11 NGP59371

LOCKING

CASTER

#14 NGP59381 #17 NGP5939 #18 NGP5940 #19 NGP59411 #20 NGP2515

#21 NGP5029

LINKAGE TUBE

W/ STOP BRCKT. NET POST NET CRVD. INNER LEG

TABLE TENNIS

BALL

TABLE TENNIS

PADDLE

#13

#15

TABLE SURFACE 2

8X65 MM BOLT 8X55 MM BOLT

X1 X2 X2 X4 X4

X2 X2

X24 X8 X8

X16 X2

X2 X3

X2X1

6 MM SAFETY

LOCK NUT

#16 X2

8 MM WRENCH

#14

ASSEMBLY INSTRUCTIONS

1. Unfold the outer (player end) pre-assembled leg toastraight upright position.

2. Attach the INNER (center end) LEG, #19, to the backside of the TABLE SURFACE, #1 and #2, with METAL

BRACKETS, #8, using SCREWS, #5, in pre-drilled holes. Note: The Metal Bracket’s slot opening needs to point in the

same direction as the other leg assembly (toward center end) with both Leg Pins in slots.

3. Attach the LINKAGE TUBE, #6, and TUBE WITH STOP BRACKET, #14, to the legs with BOLTS, #10, WASHERS, #7,

BUSHINGS, #9, and NUTS, #12, as shown below. Note: The ends of the Linkage Tube and Tube with Stop Bracket that

attach to the outer (player end) pre-assembled leg are assembled on the insideof the legs. The other ends, that attach to

the inner (center end) leg are assembled on the outsideof the legs.Also note, the position of the Stop Bracket.

IMPORTANT:

Note: Position of

Stop Bracket

Tip: The extra hole on the Inner Leg, #19, is used for

installing the safety locks in a later step. Position so

locks will be on the same side when Table Surfaces

are flipped.

Note: Slot position #14

#14

ASSEMBLY INSTRUCTIONS (CONT.)

4. Thread LOCKING CASTERS, #11 onto the INNER LEG, #19, as shown. Attach the METAL LEG PLATE, #3, to the

INNER LEG, #19, with BOLTS, #13, and WASHERS, #7.

5. Carefully turn the two table surfaces over and attach the METAL LEG PLATE, #3, to the table leg, as shown, with

BOLTS, #13, and WASHERS, #7.

#19

#13

ASSEMBLY INSTRUCTIONS (CONT.)

6. Attach the SAFETY LOCKS, #4 to the INNER LEGS, #19, with LOCKING NUT, #15, as shown below.

Leg

#15 #4

Safety Lock Assembly

7. Attach the NET POSTS, #17, to the center of the table and slip the NET, #18, onto the posts.

Clip the strap buckles together when folding

the two table tops for storage. Note: Remove

Net Posts and Net, and store in bag, before

folding table for storage.

Move up the safety lock, so it catches the bottom

of the table, when folding up for storage.

Move down, to disengage table, before opening

the tables for play.

Inside

Outside

180-DAY LIMITED WARRANTY

This product is warranted to the original purchaser to be free from defects in material or workmanship

for a period of 180 days from the date of the original retail purchase.

This warranty does not cover defects or damage due to improper installation, alteration, accident or

any other event beyond the control of the manufacturer. Defects or damage resulting from misuse,

abuse or negligence will void this warranty. This warranty does not cover scratching or damage that

may result from normal usage.

This product is not intended for institutional or commercial use; the manufacturer does not assume

any liability for such use. Institutional or commercial use will void this warranty.

This warranty is nontransferable and is expressly limited to the repair or replacement of the defective

product. During the warranty period, the manufacturer shall repair or replace defective parts at no

cost tothe purchaser. Shipping charges and insurance are not covered and are the responsibility of

the purchaser. Labor charges and related expenses for removal, installation or replacement of the

product or components are not covered under this warranty.

The manufacturer reserves the right to make substitutions to warranty claims if parts are unavailable

or obsolete.

The manufacturer shall not be liable for loss of use of the product or other consequential or incidental

costs, expenses or damages incurred by the consumer of any other use. The user assumes all risk of

injury resulting from the use of this product.

This warranty is expressly in lieu of all other warranties, expressed or implied, including warranties of

. Neither the manufac-

turer nor any of its representatives assumes any other liability in connection with this product.

All warranty claims must be made through the retailer where the product was originally

purchased. A purchase receipt or other proof of date of purchase will be required to process

all warranty claims. The model number and part numbers found within the assembly

instructions will be required when submitting any parts requests or warranty claims.

For further warranty information or inquiries, please call 800-759-0977

NG2325B

TABLE DE TENNIS DE TABLE

BOUNCEBACK 2,74 m

INSTRUCTIONS D’ASSEMBLAGE

Ver. 0417

Contactez notre

service à la clientèle au

800-759-0977

avec des questions sur le montage

ou l'utilisation de ce produit.

MERCI!

Merci d’avoir acheté notre produit. Nous travaillons 24 heures sur 24, partout dans le monde, à garantir

que nos produits sont de la meilleure qualité possible. Toutefois, dans les rares cas de problèmes lors

du montage ou de l'utilisation de ce produit, se il vous plaît communiquer avec notre service à la clientèle

au 800-759-0977 pour une aide immédiate avant de contacter votre revendeur. Pour obtenir de plus amples

renseignements, veuillez lire l'information relative à la garantie au verso de ce guide d’instructions.

ENTRETIEN ET USAGE

1. Ce produit doit être utilisé À L’INTÉRIEUR seulement.

2. NE JAMAIS déplacer la table en la traînant, cela pourrait endommager les pieds.

INSTRUCTIONS D’ASSEMBLAGE

1. Trouver une surface propre et plane, pour commencer le montage de votre table de jeu. La table

s’assemble à l’envers pour être ensuite retournée sur ses pieds, une fois l’assemblage complété.

Cette table est lourde et nécessite au moins deux adultes forts pour la soulever et la retourner.

2. Retirez le contenu de la boîte, avant de commencer l’assemblage, assurez-vous d’avoir toutes

les pièces telles que listées et illustrées au tableau d’identification. Avis : certaines pièces sont

préassemblées ou préinstallées.

3. Certaines illustrations ou dessins peuvent ne pas ressembler au produit que vous avez acheté.

4. Quand vous fixez en place une pièce avec plus d’une vis ou écrou, veuillez, en premier, les

visser à la main et terminer la fixation avec un tournevis ou une clé.

5. Un tournevis électrique peut être utile lors de l’assemblage, mais veuillez le régler à basse torque

et l’utiliser avec prudence; si la torque est trop élevée, la vis peut se défaire ou être trop serrée.

AVERTISSEMENTS!

LIRE TOUTES LES INSTRUCTIONS D’ASSEMBLAGE ET LES CONSIGNES DE SÉCURITÉ ATTENTIVEMENT.

RISQUE D’ÉTOUFFEMENT – CERTAINS ÉLÉMENTS DU PRODUIT CONTIENNENT

DE PETITES PIÈCES - NE CONVIENT PAS À UN ENFANT DE MOINS DE TROIS ANS.

IMPORTANT! VEUILLEZ LIRE, EN ENTIER, TOUTES LES

INSTRUCTIONS AVANT D’ASSEMBLER VOTRE PRODUIT.

TABLE DE TENNIS DE TABLE BOUNCEBACK 2,74 m - NG2325B

Liste des pièces

4/17

#1NGP59311 #2NGP59321 #3NGP59331 #4NGP59341 #6NGP59351 #8NGP59361 #11 NGP59371

#14 NGP59381 #17 NGP5939 #18 NGP5940 #19 NGP59411 #20 NGP2515

#21 NGP5029

X1 X2 X2 X4 X4

X2 X2

X2 X3

illustrations non à l'échelle

Pour commander les pièces de remplacement,

veuillez téléphoner au 1 800 759-0977

PIÈCES

SAC DE QUINCAILLERIE - NGP59421

PANNEAU DE PIED

SURFACE DE JEU 1 LOQUET DE

SÛRETÉ CHARNIÈRE

MÉTALLIQUE

TUBE RELIEUR ROULETTE

AVEC FREIN

TUBE AVEC

ARRÊT POTEAU DE FILET FILET PIED CENTRAL

INCURVÉ BALLES TENNIS

DE TABLE

RAQUETTE

TENNIS DE TABLE

SURFACE DE JEU 2

RONDELLE (8 mm)

VIS (4 x 12 mm) DOUILLE (8 mm) CONTRE

ÉCROU (8 mm)

CLÉ (8 mm)

BOULON (8 x 70 mm) BOULON

(8 x 55 mm)

#5 #7 #9#10

#12 #13

#15

X24 X8 X8

X16 X2X8

ÉCROU DE LOQUET

DE SÛRETÉ (6 mm)

#16 X2

#14

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Carmelli Robotik Handbücher

Carmelli

Carmelli NG2325B Bedienungsanleitung

Beliebte Robotik Handbücher anderer Marken

STEMCenter USA

STEMCenter USA Pi-Bot v2.00 Bedienungsanleitung

SunFounder

SunFounder PiDog Bedienungsanleitung

Universal Robots

Universal Robots UR5 Bedienungsanleitung

Universal Robots

Universal Robots E Series Bedienungsanleitung

YASKAWA

YASKAWA MOTOMAN-MPL80 II Bedienungsanleitung

EFORT

EFORT ECR5 Gebrauchsanweisung

Epson

Epson C8 Series Bedienungsanleitung

WowWee

WowWee ROBOQUAD Bedienungsanleitung

Milvus Robotics

Milvus Robotics SEIT 100 Bedienungsanleitung

RoboMaster

RoboMaster AI Robot 2020 Standard Version Bedienungsanleitung

fischertechnik

fischertechnik Mini Bots Bedienungsanleitung

YASKAWA

YASKAWA MA2010 Handbuch

Abicor Binzel

Abicor Binzel iCAT mini Bedienungsanleitung

ABB

ABB OmniCore E10 Bedienungsanleitung

YASKAWA

YASKAWA Motoman DX200 Bedienungsanleitung

pitsco

pitsco Tetrix Max Bedienungsanleitung

ECOVACS

ECOVACS DEEBOT R95 Bedienungsanleitung

Feng Yuan

Feng Yuan Interstellar Warrior Bedienungsanleitung