Carrier TRANSICOLD VATNA 200 Versionshinweis

VATNA 200 - 300 - 400

DRIVER'S MANUAL

TABLE OF CONTENTS

1. INTRODUCTION .......................................................................................................... 2

2. IDENTIFICATION & NOISE LEVEL ........................................................................................... 2

2.1. Nameplate ...................................................................................................... 2

2.2. Noise Level Charts .............................................................................................. 2

3. SAFETY ................................................................................................................. 2

3.1. Warning and precaution ........................................................................................... 2

3.2. Risks .......................................................................................................... 2

3.3. Warning Stickers Maintenance ..................................................................................... 2

4. OPERATION ............................................................................................................. 2

4.1. Control box description ........................................................................................... 2

4.2. Start the unit on standby .......................................................................................... 3

4.3. Stop the unit .................................................................................................... 3

4.4. Defrost the unit .................................................................................................. 3

5. Maintenance Schedule ..................................................................................................... 4

6. RECOMMENDATIONS ..................................................................................................... 4

6.1. Before loading .................................................................................................. 4

6.2. When loading ................................................................................................... 4

7. RECOMMENDED TRANSPORT TEMPERATURES .............................................................................. 4

8. A.T.P. EUROPE REGULATION EXTRACT ..................................................................................... 5

9. 24H ASSISTANCE ........................................................................................................ 5

62-61954-01 1

1. INTRODUCTION

This guide has been prepared for the operator of Carrier Transicold re-

frigeration units. It contains basic instructions for the daily operation of the

refrigeration unit as well as safety information, troubleshooting tips, and

other information that will help you to deliver the load in the best possible

condition.

Please take the time to read the information contained in this booklet and

refer to it whenever you have a question about the operation of your Car-

rier Transicold unit. This manual refers to the standard model. Some op-

tions may not appear in it, and in such cases you are requested to consult

our Technical Services.

Your refrigeration unit has been engineered to provide long, trouble-free

performance when it is properly operated and maintained. The checks

outlined in this guide will help to minimize on the road problems. In addi-

tion, a comprehensive maintenance program will help to insure that the

unit continues to operate reliably. Such a maintenance program will also

help to control operating costs, increase the unit's working life, and im-

prove performance.

When having your unit serviced, be sure to specify genuine Carrier Tran-

sicold replacement parts for the highest quality and best reliability.

At Carrier Transicold, we are continually working to improve the products

that we build for our customers. As a result, specifications may change

without notice.

2. IDENTIFICATION & NOISE LEVEL

Keep the fold out sheet while reading the instructions.

2.1. NAMEPLATE

Each unit is identified by a nameplate (A) attached to the frame of the

unit. The nameplate identifies the complete model number of the unit, the

Serial Number (B) and some other information.

If a problem occurs, please refer to the information on this plate,

and make a note of the model and Serial Number (B) before

calling for assistance.

This information will be needed when you contact a technician

so that he may properly assist you.

The sticker (C) indicates the noise level in Lwa (sound power

level).

2.2. NOISE LEVEL CHARTS

Unit Maximum Sound Power level

LWA(dB)

VATNA 200/300/400 54

3. SAFETY

3.1. WARNING AND PRECAUTION

This manual contains safety and service instructions to follow

in order to prevent any accident. Some of following stickers

have been placed on the product for your SAFETY.

•NEVER manipulate cab command when driving.

•NEVER intervene on the unit, for any service or

maintenance operation, contact your Carrier service centre.

•NEVER remove safety elements (grill, skin, metal

sheet). If damaged, contact your Service Center for

replacement.

3.2. RISKS

Contact your medical assistance in case of accident.

GENERAL RISKS

Burning with hot and cold test.

Cuttings.

Noise level.

Exhaust gas:

- DO NOT use the unit in a closed space.

Asphyxiation:

- Leave the doors open when working inside the

body.

Risk of slipping going up in the body:

- Ice on the floor.

Risk of slipping going out of the body:

- Leak of refrigerant.

Electrical risks – when connecting and disconnecting

standby plug.

3.3. WARNING STICKERS MAINTENANCE

1. Keep the warning pictograms clean and without any obstruction

material.

2. Clean the pictograms with water and soap and wipe them with soft

fabric.

3. Replace damaged or missing pictograms with new pictograms

available in Carrier network.

4. If a component having a pictogram is replaced by a new one, be sure

that the new component has the right pictogram.

5. Place a warning pictogram by applying it on a dry surface. Press to

external sides to eliminate air bubbles.

4. OPERATION

4.1. CONTROL BOX DESCRIPTION

Operation of these units is automatic.

During temperature pull-down and plate freezing, the unit operates unin-

terrupted.

When the eutectic solution is frozen, the unit shuts down and goes into

pressure-control mode (low pressure).

62-61954-01 2

The minimum operation time for accumulation must be in the region of 9

hours. This time should be increased after defrosting to about 17 hours.

1. Standby operation LED (green).

2. ON/OFF switch.

3. Rearm button.

Used if overload relay opened.

4. Power plug connection.

To connect power supply network .

4.2. START THE UNIT ON STANDBY

BEFORE STARTING

• - On the power network : check that the type of current

corresponds to the characteristics of the unit.

1. Ensure that the ON/OFF switch is switched OFF

position

2. Connect the power network plug to the control box

1. Switch the ON/OFF switch to "ON" position.

The "STANDBY OPERATION" LED is highlighted.

2. Check indicating flag located on front grid for

proper motor rotation

Condenser air flow must be drawn into unit.

If the condenser air drawn out the unit :

• Switch “0” position the “ON/OFF”

switch.

• Disconnect the power plug.

• Reverse the red part by using a screw

driver

In the event of difficulty on start-up, check that

• Network supply is Ok.

• Overload relay is not open by pushing the red 'REARM'

button.

4.2.1. STANDBY GUIDELINE

Standardized exten-

sion cable H.07.RNF

mm2

Unit Fuse 220/3/

50Hz

Fuse

400/3/50Hz

220 volts 400 volts

VATNA 200 15 A 12 A 4 x 2,5 mm² 4 x 2,5 mm²

VATNA 300 20 A 15 A 4 x 4 mm² 4 x 2,5 mm²

VATNA 400 25 A 20 A 4 x 4 mm² 4 x 4 mm²

4.3. STOP THE UNIT

1. Stop the unit by putting the ON/OFF switch to

"OFF" position.

4.4. DEFROST THE UNIT

• In order to obtain the best results from this refrigeration

unit in door-to-door distribution conditions: it is absolutely

necessary to defrost the eutectic plates regularly.

• Any excess of frosting on the plates lowers the efficiency of

the eutectic system.

Do not used water to defrost the eutectic plates.

Too much accumulation of frost on the plates can be avoided

by brushing them down.

Evacuate water that may accumulate on the ground before

restart the unit to avoid a frozen floor.

62-61954-01 3

Figure 1. Example of frosting eutectic plate

1. Stop the unit.

2. Open the cooling box doors.

The plates will defrost naturally.

The defrosting time depends on the frosting and also the

ambiant temperature: keep the cooling box doors opened

from 3 to 12 hours according to the conditions.

5. MAINTENANCE SCHEDULE

VATNA 200/300/400 Service frequencyService Type

Period or

hours interval 12 month 24 months

Service A X X

Service B X

6. RECOMMENDATIONS

This unit is not designed to carry special loads which emit

corrosive gas.

These kind of products can impact unit performance, and

seriously reduce component life time.

Please contact us if such products need to be carried.

• Perform a defrost of the eutectic plates at least once a week to ensure

an optimal efficiency of the eutectic system

Any excess of frosting lowers the efficiency of the eutectic

system.

• It is important to check the temperature of the product being loaded

to ensure that it is at the correct temperature for transport. The

refrigeration unit is designed to maintain the temperature of the product

at the temperature at which it was loaded; it was not designed to cool

a warm product.

6.1. BEFORE LOADING

• Check the condition of the inside and outside of the insulated body, as

well as the door seals.

• Your vehicle should always be clean and well-aired.

6.2. WHEN LOADING

• To be carried out with the unit stopped.

• It is recommended to open doors as little as possible to avoid the intake

of hot air and humidity.

• Select the temperature by means of the thermostat, according to the

transported goods.

• Check the internal temperature of the goods being loaded (using a

probe thermometer).

•• Leave a free space of about 6 to 8 cm between

load and front wall.

• Leave a free space of about 20 cm between

the top of the load and the roof.

• Load product on pallets (gratings) to provide

free air return to unit and improvement product

protection.

• Do not forget to close the doors.

• Before closing the doors, check your load once more and see that

nobody is shut inside the box.

For stationary utilisation, we recommend to place the box in the

shade.

Never leave your unit more than a month without running.

Open the cooling box doors in case of extended stop.

7. RECOMMENDED TRANSPORT TEMPERA-

TURES

Below are some general recommendations on product transport temper-

atures and operating modes for the unit. These are included for reference

only and should not be considered pre-emptive of the Set-point required

by the shipper or receiver. More detailed information can be obtained from

your Carrier Transicold dealer.

PRODUCT Temperature inside

the cooling box*

Ice -20°C (-4°F)

Frozen fruits and vegetables -18°C (-0°F)

Frozen meats and seafood -20°C (-4°F)

Ice cream -25°C (-13°F)

* Given by the Thermometer that indicates the temperature inside the

cooling box.

During delivery cycles that includes frequent stops and door

openings, it is recommended that the unit always be operated

in the continuous run mode to help insure product quality.

It is essential to shutdown the compartment during the periods

when the doors are open, in order to maintain the temperature

of the cargo in the other compartments and keep the unit

operating correctly.

62-61954-01 4

8. A.T.P. EUROPE REGULATION EXTRACT

Approval of vehicles intended for the carriage of perishable goods.

Before putting a refrigerated vehicle into service, it is necessary to have

it approved by the Regional Health Department.

Characteristics of vehicles used for carrying perishable goods; re-

frigeration unit.

The refrigeration unit is an insulated unit with a cooling system which

makes it possible, with a mean outside temperature of +30°C, to lower the

temperature inside the empty body and to maintain this low temperature

in the following way:

Class A: Refrigeration unit furnished with a cooling system whereby a

temperature between +12°C and 0°C inclusive can be chosen.

Class B: Refrigeration unit furnished with a cooling system whereby a

temperature between +12°C and –10°C inclusive can be chosen.

Class C: Refrigeration unit furnished with a cooling system whereby a

temperature between +12°C and –20°C inclusive can be chosen.

The cooling capacity of a unit is determined by a test carried out in one of

the approved testing stations and ratified by an official report.

The "K" factor of bodies intended to be classified as C must be

equal to or lower than 0.4 W/m2 °C.

Signs, identification marks and plates to be attached to refrigeration

units.

Distinguishing plate:

• Standard refrigeration unit Class A → FNA

• Reinforced refrigeration unit Class A → FRA

• Reinforced refrigeration unit Class B → FRB

• Reinforced refrigeration unit Class C → FRC

In addition to the above identification marks, the date (month and year) of

expiry of the approval certificate must be indicated.

Refrigeration plate example:

( 11 = month (November) 2023 = year )

Regularly check the expiry date of the approval certificate.

During transport, the approval certificate or provisional

certificate should be shown on request of qualified agents.

To have an insulated unit approved as a refrigeration unit, an

application to modify the approval certificate should be sent to

the regional health office.

9. 24H ASSISTANCE

At Carrier Transicold we're working hard to give you complete service

when and where you need it. That implies a worldwide network of dealers

and available an emergency service. These service centres are manned

by factory-trained service personnel and backed by extensive parts in-

ventories that will assure you of prompt repair.

Should you encounter a unit problem with your refrigeration unit during

transit, follow your company's emergency procedure or contact the near-

est Carrier Transicold service centre. Consult the directory to locate the

service centre nearest you. This directory may be obtained from your Car-

rier Transicold dealer.

If you are unable to reach a service center, call Carrier Transicold’s

24Hour Assistance: ONE CALL.

In Europe, please use the following free phone numbers from:

AT AUSTRIA 0800 291039

BE BELGIUM 0800 99310

CH SWITZERLAND 0800 838839

DE GERMANY 0800 1808180

DK DENMARK 808 81832

ES SPAIN 900 993213

FR FRANCE 0800 913148

FI FINLAND 0800113221

GB GREAT BRITAIN 0800 9179067

GR GREECE 00800 3222523

HU HUNGARY 06800 13526

IT ITALY 800 791033

IE IRELAND 1800 553286

LU LUXEMBURG 800 23581

RU RUSSIA 810 800 200 31032

NO NORWAY 800 11435

NL THE NETHERLANDS 0800 0224894

PT PORTUGAL 8008 32283

PL POLAND 00800 3211238

SE SWEDEN 020 790470

From other countries / Direct: +32 11 8791 00

In Canada or United States, call: 1 – 800 – 448 1661

When calling, please have the following information ready for fastest

service:

• Your name, the name of your company, and your location.

• A telephone number where you can be called back.

• Refrigeration unit model and serial number.

• Box temperature, Set-point and product.

• Brief description for the problem you are having and what you have

already done to correct the problem.

We will do everything we can to get your problem taken care of and get

you back on the road.

62-61954-01 5

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Carrier TRANSICOLD Kühlbox Handbücher

Carrier TRANSICOLD

Carrier TRANSICOLD CITIMAX 280 Bedienungsanleitung

Beliebte Kühlbox Handbücher anderer Marken

DINSEO

DINSEO DIX CM 653.M Bedienungsanleitung

Keter

Keter COOL STOOL Bedienungsanleitung

Seifert

Seifert 43042001 Bedienungsanleitung

Black & Decker

Black & Decker BDC24L-LA Bedienungsanleitung

Dometic

Dometic MOBILE COOLING TROPICOOL TC07 Bedienungsanleitung

Seifert

Seifert 46122001 Bedienungsanleitung

Kayoba

Kayoba 008723 Bedienungsanleitung

AEG

AEG KK 14 Bedienungsanleitung

ekwb

ekwb EK-Supreme HF Cu Handbuch

DoKaSch

DoKaSch Opticooler Gebrauchsanweisung

Mobicool

Mobicool MCF 32 AC/DC Bedienungsanleitung

Crivit Outdoor

Crivit Outdoor REK 230 C2 Bedienungsanleitung

Tosot

Tosot TM18H4O Bedienungsanleitung

Orbit

Orbit ArizonaMist Bedienungsanleitung

ekwb

ekwb EK-FB R3Gene Handbuch

Seifert

Seifert KG 4305 Bedienungsanleitung

GLAM haus

GLAM haus GH2201E Bedienungsanleitung

Waeco

Waeco CoolFun A5-15 Bedienungsanleitung