Carrier Micro-Link 5 Bedienungsanleitung
1
ML5 WiFi Capabilities (Separate section inside the manual just for WiFi.
The ML5 controller offers connectivity thru WiFi 802.11 b/g/n. When the device is connected to
the WiFi the user can connect to the ML5 controller via the Data-Connect program. Additionally
the user can connect to the ML5 controller through your devices browser by accessing a
webpage that resides on the ML5 controller.
There are two types of operating systems that can connect to the ML5 controller, IOS and
Android. IOS systems require you to enter the password in your systems setting and enter the
password a second time when logging into the Data-Connect program or resident webpage. The
Android system only requires you to log into the devices WiFi settings.
The ML5 WiFi can be accessed through the Alt menu on the keypad. Select Alt and arrow
through the display until ‘net’ is displayed, select ENTER key. Scroll through the menu until “
EnbL” is displayed in the left display. On the right display the user can scroll up or down and
select “On” to enable WiFi or “OFF” to disable.
Steps to log into the controller network.
Start the refrigeration system.
Turn on your wireless device, tablet, cellphone, etc.
1) From your home screen, tap the Apps located at the upper-right of your tablet screen.
2) Tap on the Settings icon. ...
3) Tap on the Wireless and networks section, tap on Wi-Fi settings.
4) Tap on Wi-Fi: Turn on Wi-Fi.
5) Locate your wireless network by locating the Container ID in the available networks (SSID).
6) You’ll be prompted by your device at this point to enter the password.
To see the password access the controller keypad.
1) Press “Alt Mode”
2) use the down arrow to get “nEt” to show on the display.
3) Press “ENTER”
4) use the down arrow to get “PASSW EntR” to show on the display.
5) Press “ENTER”
6) wifi password translation…
Notes about the password:
WiFi password resets every 4 hour (hours 2,5,8,11 based on system clock)
Password is good for the customers fleet (assuming all clock are set properly)
2
If communicating at the password change time boundary, the session can run for an addition 4
hours without changing the password.
Data-Connect (internal app)………
- Add instruction to connect app to controller
Connecting with device browser……..
- Add instruction to open browser and open webpage
Controller Function Code:
WiFi User Interface:
1.1 Wireless menu in ALT. Mode
Below are the necessary (limited set of) parameters that are needed for wireless configuration
and status checks, accessible via the 7-seg LCD display.
More comprehensive wireless configuration and status are available via the embedded http
portal.
All the below parameters are available in ALT. Mode under the “nEt” menu.
Need to determine how to explain many of
these options to the user
TYPE
Display, Select
FUNCTION
WIRELESS ACCESS
MAIN MENU
Wireless Enable/ Disable, WiFi Role, WiFi
Access Point Status, WiFi Client Status (WiFi
Role = Station), Token (Derived Key), WiFi
Password
DEFAULT
Wireless Enable/ Disable
MAIN MENU DISPLAY
For Wireless Enable/ Disable: Left Display: “
EnbL”, Right Display: “ on”, “ OFF”
For WiFi Role: Left Display: “ roLE”, Right
Display: “ AP”, “ STA”, “ dUAL”
For WiFi Access Point Status: Left Display:
“APStA”, Right Display: “ OFF”, “ InIt”, “
IdLE”, “ Err”, “ Conn”
For WiFi Client Status: Left Display: “ CStA”,
Right Display: “ OFF”, “ Conn”, “ InIt”,
“IPCHk”, “ IdLE”, “ SrCH”, “ Err”
For Token (Derived Key): Left Display: “
toK”, Right Display: “ EntR”
When Enter is pressed: Left Display: <blank>,
Right Display: 4 digit numeric text (Phase 1),
“ COnF”
3
For WiFi Password: Left Display: “PASSW”,
Right Display: “ EntR”
When Enter is pressed: Left Display: 4 digit
alpha Right Display: 4 digit alpha
numeric text, numeric text, “-----“
SUBMENU DEFAULT
For Wireless Enable/ Disable: “ on”
For WiFi Role: “ AP”
For WiFi Access Point Status: “ OFF”
For WiFi Client Status: “ OFF”
For Token (Derived Key): “ EntR”
For WiFi Password: “ EntR”
DESCRIPTION
For Wireless Enable/ Disable:
This function code is used to enable or disable
Wireless.
Product name: Micro-Link 5 Controller
Model name: ML5
FCC ID: 2AK6N-MICROLINK5
ISED ID: 703A-MICROLINK5
FCC statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Important Note: To comply with the FCC RF exposure compliance requirements, no change to
the antenna or the device is permitted. Any change to the antenna or the device could result in
the device exceeding the RF exposure requirements and void user’s authority to operate the
device.
Caution: Exposure to Radio Frequency Radiation. To comply with FCC/IC RF exposure
compliance requirements, a separation distance of at least 20 cm must be maintained between the
antenna of this device and all persons. This device must not be co-located or operating in
conjunction with any other antenna or transmitter.
ISED statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two
conditions: (1) This device may not cause interference. (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
Inhaltsverzeichnis
Andere Carrier Controller Handbücher
Carrier
Carrier Infinity SYSTXCCUID01-A Bedienungsanleitung
Carrier
Carrier 40VCC8 Montageanleitung
Carrier
Carrier KJR120 Bedienungsanleitung
Carrier
Carrier OPN-OPT-OL Installationshandbuch
Carrier
Carrier 30WI Bedienungsanleitung
Carrier
Carrier TruVu TV-MPCXP1628-NR Installationshandbuch
Carrier
Carrier VVT Bypass Installationshandbuch
Carrier
Carrier 40WA900024 Bedienungsanleitung
Carrier
Carrier NTC 36CB Bedienungsanleitung
Carrier
Carrier XCT7 40VCW117FQEE Montageanleitung
Carrier
Carrier 33ZCVAVTRM Bedienungsanleitung
Carrier
Carrier TruVu UCXP683T Installationshandbuch
Carrier
Carrier WTC-RCI-DC Series Bedienungsanleitung
Carrier
Carrier 40KMC Bedienungsanleitung
Carrier
Carrier RTU Open v3 Kurzanleitung zur Einrichtung
Carrier
Carrier 40VM Series Bedienungsanleitung
Carrier
Carrier MPC Open XP Series Installationshandbuch
Carrier
Carrier UC Open Installationshandbuch
Carrier
Carrier B Series Bedienungsanleitung
Carrier
Carrier MINIMUM LOAD CONTROL ACCESSORY 30XA080-500 Bedienungsanleitung
