Carrier System Touch Montageanleitung

A member of the United Technologies Corporation family · Stock symbol UTX · Catalog No. 11-808-525-01 · 4/16/2018

Verify that you have the most current version of this document from

www.hvacpartners.com

or your local Carrier

office.

Important changes are listed in

Document revision history

at the end of this document.

Corporation. All other trademarks are the property of their respective owners.

Contents

What is the System Touch? ........................................................................................................................................ 1

Specifications ........................................................................................................................................................2

System Touch screens .........................................................................................................................................3

Wiring and mounting the System Touch ................................................................................................................... 9

Wiring specifications......................................................................................................................................... 10

To wire and mount the System Touch............................................................................................................ 10

Setting up the system ...............................................................................................................................................12

Step 1: Set up communications..................................................................................................................... 12

Step 2: Discover controllers ............................................................................................................................ 13

Step 3: Create the system database ............................................................................................................. 14

Step 4: Optional - Install custom screen file ................................................................................................ 15

Step 5: Set up scheduling functionality ........................................................................................................ 15

Step 6: Optional - Adjust touchscreen settings............................................................................................ 16

Using System Touch's temperature and humidity sensors to control equipment ...............................................17

To edit touchscreen settings.....................................................................................................................................19

To update the System Touch's firmware .................................................................................................................21

Resetting the System Touch.....................................................................................................................................22

Compliance ................................................................................................................................................................23

FCC Compliance................................................................................................................................................. 23

CE Compliance ................................................................................................................................................... 23

Industry Canada Compliance........................................................................................................................... 23

Appendix: External sensor resistance requirements ............................................................................................24

Document revision history ........................................................................................................................................25

The System Touch is a touchscreen device with a 4.3 in. color LCD display that acts as a front-end interface to

controllers on a BACnet network.

The System Touch has built-in temperature and humidity sensors. You can use their values to control equipment.

You can also wire an external thermistor to the System Touch and use its value instead of the built-in temperature

sensor's value.

You can install and run the System Touch with only its built-in system screens, or you can create a custom

touchscreen file in ViewBuilder. This requires that you create custom screens in ViewBuilder, and then save the

touchscreen (.touch) file. See "Working with System Touch screens" in ViewBuilder Help.

NOTE

To use custom screens, the System Touch must have v2.00-015 or later firmware.

What is the System Touch?

To set up a System Touch:

1 Connect the System Touch to an MS/TP network (page 9).

2 Discover BACnet devices on the same network or on a different BACnet ARCNET or BACnet MS/TP network

(page 12).

3 Create the system database (page 12).

4 Install custom screen file (optional) (page 12).

After you set up your system, you can:

•Schedule when equipment should run

•View alarms

•View Equipment Touch screens for individual controllers on the network. The information on the controller

screens depends on whether the controller is a Carrier controller or a third-party controller, and if it is an

Carrier controller, whether it has an Equipment Touch file.

NOTE

To see a controller's Equipment Touch screens on the System Touch, the Equipment Touch file must

be downloaded to the controller before you create the System Touch database.

Specifications

Power 24 Vac (±15%), 5 VA, 50–60 Hz, Class 2.

Display 4.3 in. resistive touchscreen color LCD display with backlighting (Wide Quarter VGA,

480x272 pixels)

Enclosure ABS plastic with polycarbonate bezel

Ports •EIA-485 based serial port for BACnet MS/TP communication

•USB host port

Microcontroller 32-bit

Memory •16 MB Flash memory to store program code and screen file.

•1.5 MB RAM to store variable data and LCD data.

•4 KB Serial EEPROM to store non-volatile configuration data.

Real-time clock A365-day real time clock/calendar chip. The time and date will be maintained for a

minimum of 72 hours after loss of power (at room temperature).

Audible alarm

notification

A piezoelectric sounder

Temperature sensor Range:

Accuracy over 30.0°F to 100°F:

Accuracy over full range:

Resolution:

-4.0°F to 140°F (-20°C to 60°C)

±1.0°F (±0.55°C)

±2.0°F (±1.1°C)

0.2°F (0.1°C)

What is the System Touch?

Humidity sensor Range:

Accuracy over 20 to 80% RH:

Accuracy over full range:

Resolution:

0 to 100% RH

±3.0% RH

±5.0% RH

0.05% RH

Environmental

operating range

-4ºF to 140ºF (-20ºC to 60ºC), 10–90% RH, non-condensing

Mounting Wall or panel mounting within the building interior.

Overall dimensions Width:

Height:

Depth:

5.44 in. (13.82 cm)

4.55 in. (11.56 cm)

1.24 in. (3.15 cm)

Backplate dimensions Width:

Height:

4.79 in. (12.2 cm)

3.94 in. (10 cm)

Weight 8 oz. (0.23 kg)

Listed by UL-916 (PAZX), CE, FCC Part 15-Subpart B-Class A

Device identification The System Touch's box contains a label with the product name and the serial number

that begins with

STC

Remove the front of the System Touch and turn it over to see the serial number on a

label attached to the control board.

System Touch screens

The System Touch will display the system screens shown below and any custom-designed screens.

NOTE

To use custom screens, the System Touch must have v2.00-015 or later firmware. Go to

Touchscreen

Setup

About

to see the firmware version number.

Screen name

Description

Standby

If included in the touchscreen file, this custom screen displays when the System Touch has

had no user activity for the time specified on the

Inactivity Timeout

screen. This

Standby

screen is not interactive, and as soon as the user touches the screen, the

Home

screen

displays. If the touchscreen file does not include a Standby screen, the Home screen

displays after a period of inactivity.

NOTE

You can show a device's Home and Standby screens instead of the System Touch's

Home and Standby screens. See instructions for

Home Screen Setup

in To edit

touchscreen settings (page 19).

Home

A custom screen for the System Touch.

What is the System Touch?

Screen name

Description

System View

The Home screen that shows each controller in the system (labeled

Office

Conference

Room

, and

Lobby

in the above example), and for Carrier controllers, shows the zone

temperature and zone color. You can touch the button for a controller to go to its

Equipment Touch screens. See the controller's Installation Guide for a description of those

screens.

From this System View screen, you can touch:

•

Alarms

to view, acknowledge or delete alarms

•

Schedules

to view, create, or delete schedules

•

Setup

to edit the system or edit touchscreen settings (requires administrator-level

password)

The System View screen displays when the System Touch has had no user activity for a

period of time specified on the Touchscreen Setup >

Inactivity Timeout

screen (page 19).

Displays if you select a screen that requires an administrator-level password. If you have an

administrator-level password, enter it, then touch

Done

NOTES

•The default password for a new System Touch is

admin

•You can change the password on the Touchscreen Setup >

Passwords

screen (page

19).

•You log out on the

Setup

screen.

•If you try to go to a screen for a particular controller and you are prompted to log in, the

Equipment Touch screen for that controller requires a different password.

What is the System Touch?

Screen name

Description

Alarm

Manager

Lets you view all alarms in the system. See "Viewing alarms" in the System Touch User

Guide.

Alarm Detail

Shows details of a single alarm. See "Viewing alarms" in the System Touch User Guide.

Schedule Groups

Lets you create groups of equipment so that you can set up a common operating schedule

for each group. From this screen, you can also edit or delete existing schedule groups. See

"Setting up schedules" in the System Touch User Guide.

What is the System Touch?

Screen name

Description

Create Schedule

Group

Lets you create a group and assign equipment to it. See "Setting up schedules" in the

System Touch User Guide.

Schedules

Lets you view, add, edit, or delete BACnet schedules in the controller. See "Setting up

schedules" in the System Touch User Guide.

Setup

Touch a button to go to the

Communications

Discovery

Viewfile

, or

Touchscreen Setup

screen, or to log out.

Andere Handbücher für System Touch

Inhaltsverzeichnis

Andere Carrier Aufnahmegeräte Handbücher

Carrier

Carrier CSM Betriebsanleitung

Carrier

Carrier KSAIF0401AAA Bedienungsanleitung

Carrier

Carrier DLS VRF Bedienungsanleitung

Carrier

Carrier KSAIC0301230 Bedienungsanleitung

Carrier

Carrier i-Vu XT Installationshandbuch

Carrier

Carrier KSAIC0301230 Bedienungsanleitung

Carrier

Carrier System Touch Montageanleitung

Carrier

Carrier APOLLO CONTROL 50HJQ004-016 Bedienungsanleitung

Carrier

Carrier 30RBV Bedienungsanleitung

Carrier

Carrier KSAIF0101AAA Bedienungsanleitung

Carrier

Carrier Fireye NXTSD507HD Betriebsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch