Carson Reflex stick multi pro Bedienungsanleitung

CARSON Reex Stick PRO 500500046

Instruction Manual

2.4 GHz FHSS

Digital Proportional Radio Control System

CARSON Reex Stick PRO 500500046

Dear Customer

We congratulate you for buying this CARSON radio

control system, which is designed using state of the

art technology.

According to our policy of steady development and

improvement of our products, we reserve the right

to make changes in specications concerning equip-

ment, materials and design of this product at any

time without notice.

Limited warranty

This product is warranted by CARSON against

manufacturingdefectsinmaterialsandworkmanship

under normal use for 24 months from the date of

purchase from authorised franchisees and dealers.

In the event of a product defect during the warranty

period, return the product along with your receipt as

proof of purchase to any CARSON store.

CARSON will, at its option, unless otherwise provided

by law:

(a) Correct the defect by repairing the product

without charging for parts and labour

(b) Replace the product with one of the same or

similar design; or

All replaced parts and products, and products on

which a refund is made, become the property of

CARSON. New or reconditioned parts and products

may be used in the performance of warranty services.

Repaired or replaced parts and products are

warranted for the remainder of the original warranty

period. You will be charged for repair or replacement

of the product made after the expiration of the

warranty period.

The warranty does not cover:

• Damage or failure caused by or attributable to

acts of God, abuse, accident, misuse, improper

or abnormal usage, failure to follow instructions,

improper installation or maintenance, alteration,

lightning or other incidence of excess voltage or

current;

• Damage caused by losing control of your model;

• Any repairs other than those provided by a

CARSON Authorised Service Facility;

• Consumables such as fuses or batteries;

• Cosmetic damage;

• Transportation, shipping or insurance costs; or

• Costs of product removal, installation, set-up

service, adjustment or reinstallation.

This warranty gives you specic legal rights, and you

may also have other rights which may vary according

to the country of purchase.

No liability can be accepted for any minor dieren-

ces between your product and data or images cont-

ained in these instructions.

This manual forms part of this product. Should you

ignore the operating and safety instructions, the

warranty will be void. Keep this guide for future re-

ference.

CARSON Reex Stick PRO 500500046

Declaration of conformity

Dickie-TAMIYA GmbH & Co. KG hereby declares

that this model with radio, battery and charger is

in accordance with the basic requirements of the

following European directives:

98/37EG and 89/336/EWG and other relevant

regulations of guideline 1999/5/EG (R&TTE).

The original declaration of conformity can be

obtained from the following address in UK:

The Hobby Company Limited

Garforth Place, Knowlhill, Milton Keynes, MK5 8PG

Telephone 44 (0)1908 605 686

Facsimile 44 (0)1908 605 666

www.hobbyco.net

Preface ..............................................................................2

Included Items ...................................................................4

Features of the 2.4 GHz Remote Control .................5

Advantages of the 2.4 GHz Technology...................5

Worth Noting......................................................................5

Safety Instructions ...........................................................6

Operating Procedure.......................................................7

BEC-System/Connections to Receiver.......................7

Equipment for Combustion Engine...........................8

Installing the transmitter batteries............................9

The meaning of the symbol

on the product, packaging

or instructions: Electronic

devices are valuable products

and should not be disposed

of with the household waste

when they reach the end of

their running time! Help us to

protect the environment and

respect our resources by handing this appliance over

at the relevant recycling points.

We wish you good luck and a lot

of fun using your CARSON digital

proportional radio control system.

Before using your radio control system carefully read this instructions!

Contents

Throttle Rate Adjuster.....................................................9

Functions ...........................................................................10

Transmitter Handling ....................................................11

Fail safe Adjustment ......................................................12

Connection from Transmitter to Receiver.............12

Specifications...................................................................13

Battery Safety Guidelines............................................13

Optional Accessories.....................................................14

Notes ............................................................................15

CARSON Reex Stick PRO 500500046

Included Items

N⁰ 500500046

Transmitter

Receiver

Servo CS-3 (3kg)

CARSON Reex Stick PRO 500500046

Features of the 2.4 GHz Remote Control

Advantages of the 2.4 GHz Technology

Worth Noting

Receiver

The transmitter technology at 2.4 GHz is

fundamentally dierent in some aspects from the

technology in the 27,35 and 40 MHz frequency

ranges, which up to now have been conventional

with remote control models. The previous style of

location using a channel determined by plug-in

crystals is gone, and the transmitter and receiver

work with encoding.The receiver accepts only signals

with the coding from its own transmitter. Each signal

from the transmitter lasts just milliseconds. Before

the next signal, a pause is inserted, which lasts

longer than the transmission signal.

Although the frequency range used is also divided

into channels, the user doesn’t have to worry about

their conguration and has no inuence on it

anyway.

Because the same encoding is used by the

transmitter and receiver, interruption by another

receiver or a dierent transmitter will not occur.

Plug-in crystals are not needed, because the

transmitter creates the currently appropriate

frequency using a synthesizer circuit, as does the

receiver, which determines the right frequency for

ist encoding.

The old fear of double occupancy of a channel

(as when a second transmitter overreaches and

At very low wavelengths, obstacles can weaken

or interrupt the spread of radio waves. That means

there should be as few obstacles as possible in

the line between the transmission and reception

antennas.

Nonetheless, within each second countless signals

are received and evaluated by the receiver. Signals

that the receiver recognizes as defective (false

encoding, strings that don’t t the signal schema,

etc.) are suppressed and are not passed on as control

commands.

And as the frequency gets higher, the antennas get

shorter.

Remote controls using this transmitter technology

or model construction are not subject to fees.

interrupts a receiver) is a thing of the past. An

operator can go ahead and switch on a transmitter

and receiver, without negotiating with other model

users.

The data transfer capacity is considerably larger

than that of previous remote controls, which has

a positive eect on control of the digital servo, for

example.

Best of all, at events with a lot of participants, you

can always use your own equipment for settings,

tests and conversions, because the number of active

transmitters is almost unlimited.

The model’s receiver antenna must be as far away

as possible from electrically conductive parts and

very visibly arranged (protruding from the model) to

prevent loss of range.

CARSON Reex Stick PRO 500500046

Safety Instructions

Caution

R/C models can be dangerous and could cause

personal injury or damage to property. The appeal

of driving an RC model depends on assembling the

model accurately and operating it with due care and

attention.

1. Follow all the warnings, and instructions in this

manual.

2. Be„Safety Conscious“ and use your common sense

at all times.

3. Remember thatoperatinganyR/Cmodel demands

skills developed through proper instruction and

training – they are not acquired immediately.

4. Don’t run risks, such as operating your model in

adverse weather or when there is a malfunction of

which you are aware.

5. The remote control’s special technology makes

the 2.4 GHz transmitter and receiver a single unit

and coordinates them together. Therefore, the

receiver is not inuenced by any other transmitter

or radio signal.

It is no longer necessary to check whether other

models nearby are running on the same frequency

channel, as was the case with previous frequencies

(27/35/40 MHz).

6. Respect the rules of the R/C track on which you

operate your model.

Control of models is impossible with insucient or

no voltage in the transmitter or receiver. A receiver

battery, that is too weak will move the servo(s) very

slowly, and that may cause erratic operation of your

model. When using a car that operates both the

7. Running your model in the street is verydangerous

to both automobile drivers and your model. Avoid

running your model in the street.

8. Never aim or direct your model car at any person

or animal. These model cars accelerate very

quickly and can cause serious physical injury.

9. At any time during the operation of your model,

should you sense, feel, or observe any erratic

operation or abnormality, end your operation.

Do not operate it again until you are certain that

the problems have been xed.

RC models are not “toys” – safety precautions and

forward thinking are essential when operating a

remote controlled model!

10.Take advantage of the failsafe setting. During a

breakdown in signal transmission (such was

when transmission voltage is too weak), this

setting shifts the model into a control mode that

prevents it from taking o uncontrolled.

Take your time to read all the way

through the pages of this booklet

before starting the installation.

electric motor and receiver on the same battery,

such as a BEC system, you should discontinue

operating the car, when the top speed becomes

sharply reduced, otherwise loss of control will result

soon afterwards.

CARSON Reex Stick PRO 500500046

Operating Procedure

BEC-System/Connections to Receiver

Many publications say that the setup sequence

for the transmitter and receiver don’t play a role

anymore with 2.4 GHz sets. However, we recommend

sticking to the sequence typical for previous sets.

• Before operation: Connect the drive battery

to the control unit. First turn on the transmitter,

then the receiver.

BEC receiver:

Battery eliminator is installed in the receiver circuitry.

The receiver gets supplied with current through the

drive battery that runs the motor. NiMH battery from

6 V to 8.4 V can be used for the receiver. Batteries of

• After operation: Disconnect the battery from the

control unit. Turn the receiver o, and then the

transmitter.

• Before and after operating the transmitter, make

sure that trim is in the desired place and that all

checks have been made.

higher voltage may damage the receiver and servos.

Use only a speed controller which has the exclusive

connector for the BEC system.

CARSON Reex Stick PRO 500500046

Equipment for Combustion Engine

Receiver batteries and second servo are not included in the kit.

Note the correct

orientation of

the connectors!

CARSON Reex Stick PRO 500500046

Charging

Jack

4 Batteries

1.5

MADE IN CHINA

0890

ww w .c ar son -m o d els po r t .C o m

CAR S O N-M OD E L S P O R T

We r k st r asse 1 • D -9 07 6 5 Fü rt h

Battery Cover

Battery

Compartment

Charging Jack

Polarity of charging jack

Installing the transmitter batteries

Throttle Rate Adjuster

1. Remove the battery compartment cover.

2. Replace the used batteries with new AA size batteries.

Note: ON/OFF Switch should be at „OFF“ position

before charging the batteries for the transmitter.

Only Nickel-Cadmium or Nickel-Metalhydride

batteries (Ni-Cd / NiMH), such as CARSON 609000 or

its equivalents, are to be recharged. If you attempt to

recharge other types of batteries, they may explode

and cause injury or damage to you and others.

DO NOT RECHARGE OTHER TYPES

OF BATTERIES, SUCH AS ALKALINE!

The ratio of throttle operation to brake/reverse

operation can be switched in two steps, either 50:50

or 70:30. The last is to be used preferably for gas

powered cars or races.

Please replace batteries when the power

indicator blinks or the buzzer beeps.

Throttle Rate Adjuster

CARSON Reex Stick PRO 500500046

Functions

OFF

ROP

Switch

“Fail safe Pro + SET“

“France“ switch

For use in France the switch must

be set to “F“/“Fra“.

Receiver Reex Pro

Transmitter Reex Stick Pro

Throttle Servo Reverse

Channel 2

Steering Servo Reverse

Channel 1

O FF

Charger

socket

Throttle stick

2.4 GHz Antenna

ST dual rate

Steering stick

Steering trim

Power switch

Throttle trim

Power indicator

Throttle rate adjuster

Connectors:

1. Steering servo (CH1)

2. Throttle servo (CH2)

3. Channel 3 servo (CH3)*

4. Channel 4 servo (CH4)*

5. Channel 5 servo (CH 5)*

BEC: Power connector for

BEC use

* Channel 3-5 without function.

Servo Reverse:

These Reverse Switches allow the rotation

of the servo(s) to be reversed. The servo(s)

rotate(s) clockwise at NOR position and

rotate(s) counterclockwise at REV position.

Blinking LED indicates that the

batteries are getting weak.

When LED turns o, the

batteries are dead and and

need to be replaced with new

batteries

Andere Handbücher für reflex stick multi pro

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Carson Fernbedienung Handbücher

Carson

Carson Reflex Wheel II Bedienungsanleitung

Carson

Carson Reflex Wheel Pro LCD 3 Bedienungsanleitung

Carson

Carson Reflex Stick Ultimate Touch Bedienungsanleitung

Carson

Carson Dragster Sport Bedienungsanleitung

Carson

Carson Reflex Wheel ultimate touch 2.0 Bedienungsanleitung

Carson

Carson Reflex Stick II 6 Channel 2.4 GHz Bedienungsanleitung

Carson

Carson Kopropo MC-8 Bedienungsanleitung

Carson

Carson Reflex Wheel II Bedienungsanleitung

Carson

Carson Reflex Wheel LCD 7 Kanal Bedienungsanleitung

Carson

Carson Reflex Stick PRO 3.1 Bedienungsanleitung

Carson

Carson Reflex Wheel PRO 3 LCD Bedienungsanleitung

Carson

Carson Reflex Wheel Ultimate Touch 2.4g Bedienungsanleitung

Carson

Carson REFLEX STICK2 Bedienungsanleitung

Carson

Carson Reflex Wheel 500016 Bedienungsanleitung

Carson

Carson Reflex Wheel Pro2 LCD Bedienungsanleitung

Carson

Carson Reflex Wheel Pro LCD 3 Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung

Carson reflex stick multi pro Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken