Cartoni FOCUS 8S Bedienungsanleitung
PROFESSIONAL CAMERA SUPPORT
CARTONI ® / All rights reserved ©
User Manual
Version: 2.0
Issue date: Feb 2017
CARTONI S.p.A.
Via di Portonaccio, 33/B
00159 - Rome (Italy)
phone. +39 06 4382002
fax. +39 06 43588293
email. [email protected]
www.cartoni.com
USER MANUAL
4
INDEX
1. Safety & Set-up instrucons
2. Operang elements
3. Procedures
4. Technical data
5. Maintenance
6. Warranty
7. Accessories & Product line
5
The FOCUS 8SFluid Head is the easy companion to the mirrorless and
DSLR shooter and the perfect support for cameras weighing up to 8 Kg (18
lbs).
Extremely compact and lightweight the FOCUS 8S features a connuosly va-
riable uid damping system on both Pan and Tilt movements while the famed
CARTONI patented variable counterbalance brings its range of use to cover
UHD 4K cameras.
The FOCUS 8S Head comes equipped with a quick release sliding camera
plate, spirit level and orientable Pan bar that can be aached to a rosee on
either side.
The FOCUS 8S lts +/- 90° with perfect response throughout the enre Tilt
range. It interfaces with all 75 mm bowl base Tripods and supports.
The extreme ruggedness and versality togheter with a superb quality/price
rao make the Focus 8S the best possible support in its class.
• Before using your new FOCUS 8S, please read this user manual.
• Before installing the Fluid Head on the Tripod check the Tripod stability.
• Verify that the camera payload (including lens and all accessories) is
below the maximum capacity of the Fluid Head.
• Before seng up the camera, make sure that the Fluid Head is in perfect
operave condions with no damages.
1. SAFETY & SET-UP INSTRUCTIONS
ü
6
2. OPERATING ELEMENTS
1
4
5
6
3
1. Tie down knob
2. Level bubble
3. Pan bar
4. Pan bar aachment
5. Pan bar extension
6. Pan brake lever
7
7
7. Tilt brake lever
8. Pan drag selector
9. Camera Plate lock
10. Balance knob
11. Camera Plate
12. Tilt drag selector
12
9
10
2
11
8
8
3. PROCEDURES
1 - Place the FOCUS 8S on your tripod by loosening the e-down
knob (1) under the Fluid Head and level using the level bubble (2).
2 - Connect the pan bar (3) to the Fluid Head ghtening the lever (4) on the
pan bar aachment and select your desired operang angle.
The telescopic pan bar length can be adjusted via lever (5).
3 - Lock both pan and lt brakes (6 and 7), turn both lt drag selector
(12) and counterbalance knob (10) to the minimum level.
4 - Open completely the camera plate lock lever (9) to release the camera
plate (11).
5 - Aach the camera plate (11) to the boom of the camera and
ghten the clamping screw to secure the camera, centering the camera
plate on the camera, keeping the center of gravity posion in mind.
6 - Place the camera sideways on top of the FOCUS 8S, the wedge
plate will lock into place: The camera plate locking lever (9) will click into
an intermediate posion, so that you can slide the camera back & forth
to the best posion.
7 - Hold the camera in horizontal posion with the pan bar (3) and release
the lt brake lever (7). To nd the correct center of gravity posion, slide
the camera plate (11) back & forth ll you have achieved the desired
balance. Lock the camera plate lever (9) all the way trough.
8 - Set the counterbalance system by turning the balance knob (10), to
the appropriate tension. The camera has to stay at any lt angle. If nee-
ded, ne-tune by adjusng the sliding camera plate.
9
Minimum Payload Capacity
Maximum Payload Capacity
Weight
Pan Range
Tilt Range
Counterbalance
Fluid Drag
Bowl Diameter
Temperature Range
0 kg
8 kg / 18 lbs
1.8 kg / 4.0 lbs
360°
+/-90°
Connuous
Connuous
75 mm
-40°/+60°
4. TECHNICAL DATA
With indoor use - when needed - just clean the FOCUS 8S and Tripod with a
so cloth. Dirt accumulated during storage may be removed using a brush or
Air spray.
CARTONI products main mechanisms are sealed as they are also built for
professional outdoor use.
However, use under rough condions will require special care. Salt water is
very corrosive and can cause extreme damages. In atempt to avoid further
damage the Fluid Head should be washed o with fresh water at the earliest
opportunity and dried before storage.
Sand and dirt are abrasive and should be removed using a semi-s brush or
Air spray.
5. MAINTENANCE
9 - Unlock the pan brake lever (6) and set uid drag control by adjusng
selectors (8) and (12).
10
6. WARRANTY
All CARTONI Fluid Heads & Pedestals have a free of charge three (3) year
warranty. Register your product at www.cartoni.com within 30 days from
date of rst purchase/invoice to receive further two (2) year warranty for the
unsurpassed free ve (5) year warranty.
Tripods, spreaders, dollies and all accessories are guaranteed one (1) year
from the date of rst purchase/invoice.
CARTONI warrant that the product supplied will - under proper use - be free
from defects in workmanship and materials and agrees that it will, at its
opon, either repair or replace any defecve part within duraon of
warranty from date of rst purchase with no labour charge.
This warranty does not apply to any CARTONI product that has been
damaged in shipping or handling, abused, misused, operated contrary to
instrucons for use, neglected, normal wear or tear, modied or changed in
design or construcon or serviced by unauthorized pares.
Repairs or misuse by any unauthorized pares will void this warranty.
Warranty claims must be submied – in wring - to the factory for
vericaon or to an authorized distributor/dealer designated by CARTONI.
It is the end user’s responsibilty when ordering to ensure that the products
ordered conform to his requirements.
All freight of product to CARTONI must be prepaid. All implied warranes are
limited to the me period set forth herein & subject to change without noce.
No liability can be accepted for any variaon.
Inhaltsverzeichnis
Andere Cartoni Kamerazubehör Handbücher
Cartoni
Cartoni STABILO Bedienungsanleitung
Cartoni
Cartoni Focus Bedienungsanleitung
Cartoni
Cartoni MAXIMA 30 Bedienungsanleitung
Cartoni
Cartoni FOCUS 22 Bedienungsanleitung
Cartoni
Cartoni C20S Bedienungsanleitung
Cartoni
Cartoni UV-C BOXER Bedienungsanleitung
Cartoni
Cartoni Master MK2V Bedienungsanleitung
Cartoni
Cartoni MASTER 40 Bedienungsanleitung
Cartoni
Cartoni Canon DIGISUPER XJ27X6.5B Programmierhandbuch
Cartoni
Cartoni FOCUS 12 Bedienungsanleitung
Cartoni
Cartoni FOCUS 22 Bedienungsanleitung
Cartoni
Cartoni focus hd Bedienungsanleitung
Cartoni
Cartoni Sigma Bedienungsanleitung
Cartoni
Cartoni HiDV Bedienungsanleitung
Cartoni
Cartoni MASTER MK2 Bedienungsanleitung
Cartoni
Cartoni MAXIMA 30 Bedienungsanleitung
Cartoni
Cartoni STEERING P70 Montageanleitung
Cartoni
Cartoni Master 25 Bedienungsanleitung
Cartoni
Cartoni Master 25 Bedienungsanleitung
Cartoni
Cartoni MAGNUM Bedienungsanleitung
