IMPORTANT SAFETY INSTRUCTIONS
4
than the other. This plug will fit into the power outlet only one way. If you cannot
insert the plug fully into the outlet, try reversing the plug. If the plug still will not fit,
contact a licensed electrician to update your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
10. POWER SOURCES: Operate the unit only from the power source indicated on the
marking label. If you are unsure of the type of power supplied to your home, consult
your unit dealer or local power company.
11. POWER CORD PROTECTION: Arrange power supply cords so that they do not
suffer from foot traffic or pinching by items placed on or against them. Pay close
attention to cords where plug enter the AC outlet and where they exit from the unit.
12. LIGHTNING: For added protection during a lightning storm or when the component
is idle for long periods of time, unplug the unit from the wall outlet and disconnect
the antenna or cable system. This will help protect the unit from lightning and power
line surge damage.
13. POWER LINES: Do not locate an outside antenna system in the vicinity of
overhead power lines or other electric light or power circuits. When installing an
outside antenna system, take extreme care to avoid touching the power lines or
circuits; contact with them could be fatal.
14. OVERLOADING: Do not overload wall outlets, extension cords, or integral
convenience receptacles as this increases the risk of fire or electric shock.
15. REPLACEMENT PARTS: When replacement parts are required, be sure the
service technician has used replacement parts specified by the manufacturer or those
having the same characteristics as the original parts. Unauthorized substitutions may
result in fire, electric shock or other hazards.
16. SAFETY CHECK: Upon completion of any service or repairs to the unit, ask the
service technician to perform safety checks to ensure the unit is in proper operating
condition.
17. IMPORTANT SAFETY NOTE:
•Before connecting a new product such as the Cinema 12 to your audio or home
theater system, turn off all other equipment (preferably unplugging them from the
AC power source). Many audio components feature automatic turn-on circuits
that may activate during an installation, potentially causing damage to electronic
components and/or speakers. This type of damage is not covered by product
warranties, and Cary Audio specifically disclaims responsibility for any such
damage.
•Power Cord: The removable power cord provided with your unit was
specifically designed for use with this product, but other AC cords
may be used. Consult your dealer for advice on AC power cords and
high quality wire in your system.
•AC Fuse: The fuse is located inside the chassis and is not user serviceable. If the
unit does not power up, contact an authorized service representative
•Wiring: Cables running inside walls should have the appropriate markings to
indicate compliance and listing by the UL, CSA or other standards required by the
UL, CSA, NEC or your local building code. Questions about cables inside of
walls should be referred to a qualified custom installer, a licensed electrician, or
low-voltage contractor.
