Casio 120CR Bedienungsanleitung

!60

160CR

!20

120CR

160CR

Electronic Cash Register

START-UP is QUICK and EASY!

Simple to use!

4 departments

Automatic Tax Calculations

Calculator function

User's Manual

Introduction

Thank you very much for purchasing this CASIO electronic cash register.

START-UP is QUICK and EASY!

Part-1 of this User's Manual can help you make a quick start.

Once you have mastered the QUICK START operations, you will undoubtedly want to

expand your use of this machine by studying other sections of Part-2.

Original Carton/Package

If for any reason, this product is to be returned to the store

where purchased, it must be packed in the original carton/

package.

Location

Locate the Cash register on a flat, stable surface, away from

heatersorareasexposedtodirectsunlight,humidityordust.

Power Supply

Yourcashregisterisdesignedtooperateonstandardhouse-

hold current (120V, 220V, 230V or 240V; 50/60Hz). Do not

overload the outlet by plugging in too many appliances.

Cleaning

Clean the cash register exterior with a soft cloth which has

been moistened with a solution of a mild neutral detergent

and water, and wrung out.

Be sure that the cloth is thoroughly wrung out to avoid

damage to the printer.

Never use paint thinner, benzene, or other volatile solvents.

Rear customer display only for 160CR

Before you start

Contents

Getting to know your cash register ........................................................................................................... 2

Daily Job Flow........................................................................................................................................... 4

Part-1 QUICK START OPERATION ......................................................... 5

(You can operate this ECR on a basic level by reading the following sections)

1. Initialization ...................................................................................................................................... 5

2. To Select the Date Format and Monetary Mode.............................................................................. 5

3. Loading Paper.................................................................................................................................. 6

4. Basic Programming for QUICK START – TIME/DATE .................................................................... 7

5. Basic Operation after Basic Programming.......................................................................................9

6. Daily Management Report ............................................................................................................... 13

Part-2 CONVENIENT OPERATION .......................................................... 15

(Please keep these sections to expand your use.)

1. Various Programming ...................................................................................................................... 15

2. Various Operations .......................................................................................................................... 24

Part-3 CALCULATOR FUNCTION............................................................ 28

1. Calculator Mode............................................................................................................................... 28

Part-4 USEFUL INFORMATION ............................................................... 30

1. Troubleshooting ............................................................................................................................... 30

2. Specifications................................................................................................................................... 31

Operator display

Program key

Operator key

Keyboard

Drawer

Memory protection

batteries

Roll paper

Take-up reel

User’s manual

Drawer keys (2)

TOTAL

CHANGE

AMOUNT

Displays

Rear Customer Display (only for 160CR)

Operator Display

Getting to know your cash register

Note:

An error is generated

(E01 displayed)

whenever the position

of the Mode Switch is

changed during

registration.

ThepositionoftheModeSwitchcontrolsthetypeofoperationsyoucanperformonthecash

to select any Mode Switch setting, while the OPERATOR Key (marked OP) can be used to

select OFF, REG or CAL only.

OFF

In this position, the power of the cash register is off.

REG (Register)

This is the position used for registration of normal transactions.

RF (Refund)

This is the position used for registration of refunds.

CAL (Calculator)

This is the position used for calculator mode.

PGM (Programming)

This is the position used to program the cash register to suit the needs of your store.

X (Read)

This is the position used to produce reports of daily sales totals without clearing the totals.

Z (Reset)

Thisisthepositionusedtoproducereportsofdailysalestotals.Thissettingclearsthetotals.

#Number of Repeat Display

Anytime you perform “repeat registration” (page 9), the

number of repeats appears here.

Note that only one digit is displayed for the number of

repeats.

$Numeric Display

Entered values (unit prices or quantities) and calculated

values (subtotals, totals or change amount due) are dis-

played here. The capacity of the display is 8 digits.

Thispartof thedisplaycan be usedtoshow the currenttime

or date between registrations (page 26).

!Total/Change Display

The total (upper segment) or change (lower segment) sign

appears when a subtotal, total or change is obtained.

@Department Number Display

Anytimeyou press a department keyto register a unit price,

the corresponding department number appears here.

CAL

REG

OFF

PGM

PGM RF OFF REG CAL X Z

●● OP Key

● ● PGM Key

@#@#

Getting to know your cash register

Keyboard

FEED –—

÷ 4

× 3

− 2

+ 1

CH CHK

SUB TOTAL

DATE

TIME

CA AMT

TEND

CORR

ERR

EURO

(

$ % &^

Q W)

Certain keys have two functions; one for register mode and one for calculator mode.

In this manual, we will refer to specific keys as noted below to make the operations as easy to understand as possible:

!lFeed Key

@hMultiplication/Date Time Key

#yClear Key

$,Error Correction Key

%zMinus key

^xPercent Key

&nReference Number/No Sale Key

Drawer Open key

*?Z~>, '

Numeric Keys and 2-zero key

("Decimal key

)asdf

Department Keys

Q.Received On Account Key

W;Euro/Paid Out Key

EuCharge Key

RmCheck Key

ToSubtotal Key

YpCash Amount Tendered Key

#tAC Key

^xPercent Key

*?Z~>, '

Numeric Keys and 2-zero key

("Decimal key

)qwer

Arithmetic Operation Keys

Q/Memory Recall key

YpEqual Key

Getting to know your cash register

Calculator Mode

Daily Job Flow

Before Opening The Store

1. Plugged in?

2. Enough Roll Paper?

3. Date and Time is correct?

4. Enough small change in the drawer?

While The Store Is Open

1. Registrations.

2. Issuinglatestdailysalestotalifneeded.

(Generating report by Mode Switch to

X position.)

After Closing The Store

1. Issuing Daily Sales Total.

(Resetting report by Mode Switch to Z

position.)

2. Picking up money in the drawer.

3. Turn the Mode Switch to OFF.

Part-1

QUICK START OPERATION

Part-1

1. Initialization and Loading Memory Protection Battery

Important

You must initialize

the Cash register

and install the

memory protection

batteries before you

can program the

cash register.

◗To initialize the cash register

1. SettheModeSwitchtoOFF.

2. PlugthepowercordofthecashregisterintoanACoutlet.

3. Loadthememoryprotectionbatteries.

4. SettheModeSwitchtoREG.

◗To load the memory protection batteries

1. Removetheprintercover.

2. Pressdownontheovaljustbehindtheprinterpaperinlet,andslidethebattery

compartmentcovertowardthebackofthecashregister.

3. Load3newUM-3,R6P(SUM-3)orLR6(AM-3)typebatteriesintothecompartment.

Be sure that the plus (+) and minus (–) ends of each battery are facing in the

directionsindicatedbytheillustrationsinsidethebatterycompartment(Figure1).

4. Slidethememoryprotectionbatterycompartmentcoverbackintoplace.

5. Replacetheprinterpaperandprintercover.

REPLACE MEMORY PROTECTION BATTERIES AT LEAST ONCE

EVERY YEAR.

(Figure 1)

2. To Select the Date Format and Monetary Mode

YoucanselectthedateformatandMonetarymodeafterinitializationdependingontherequirementsinyourarea.

DefaultdateformatisDay/Month/Year.

DefaultMonetaryModeisAdd2.

Example:

ChangethedateformattoMonth/

Day/Year,andchangeMonetarymode

toAdd3.

1. SettheModeSwitchtoPGM.

2. Pressthefollowingkeys.

P3 appears in mode

display

Program set code number

Select numbers from

lists A and B

(To end the setting)

Date Format Selections

Year/Month/Day ?

Month/Day/Year Z

Day/Month/Year X

Monetary Mode Selections

Add 0 (0. ) ?

Add 1 (0.0 ) Z

Add 2 (0.00 ) X

▲

?ZXXo

ZCp

Part-1 QUICK START OPERATION

3. Loading Paper Roll And ReplacingThe Printer’s Ink Roll

Mode Switch to REG

CAL

REG

OFF

PGM

REG

&Press the lkey to take up any

slackinthepaper.

*Replacetheprintercoverbyplacing

thecover’sfronttabintotheregis-

ter’sgroove.

2. To remove journal paper

!Removetheprintercoverfollowing

theinstructionsabove.

@Press the lkey until approxi-

mately20cmofthepaperisfedfrom

theprinter.

#Cutofftherollpaper.

$Removethetake-up reel fromthe

printerandtakeofftheleftplateof

thereel.

%Removethejournalpaperfromthe

take-upreel.

^Cutoffthepaperleftintheprinter

and press the lkey until the

remainingpaperisfedoutfromthe

printer.

1. To load journal paper

!Removetheprintercoverbylifting

uptheback.

@Put a roll of journal paper into the

holder.

#Cuttheleadingendoftherollpaper

withscissorsandinsertthepaper

intotheinlet.

$Pressthe lkeyuntil20or30cm

ofpaperisfedfromtheprinter.

%Rollthepaperontothetake-upreel

afewturns.

^Settheleftplateofthetake-upreel

andplacethereelintotheregister.

&Removethecoreofthepaper.

*Load new paper following the in-

structions above, and replace the

printercover.

◗To replace the ink roll

!Removetheprintercover.

@Liftupthetabontheinkrollmarked

“PULLUP”.

#Install a new Ink Roll and press it

downfirmlybutgentlyuntilitsnaps

intoplace.

$Replacetheprintercoverontothe

cashregister.

%Press the nkey to check for

correctoperation.

Mode Switch to OFF

CAL

REG

OFF

PGM

OFF

◗To load receipt paper

!Tousetheprintertoprintreceipts,

followsteps1through4of “Toload

journalpaper”.

@Passtheleadingendofthereceipt

paperthroughtheprintercover’spa-

per outlet and replace the printer

cover.

#Tearoffanyexcesspaper.

DefaultprintersettingisforJournal.

Toprintreceipts,pleasereferto1-7-3

on page 20 to switch the printer for

Receipt orJournal.

Options: Roll paper – P-5860

Ink Roll – IR-40

Part-1

1. Insert the PROGRAM key (marked “PGM”) and rotate to PGM position.

2. Press the following keys to set the current time.

Example: 13:18 PM = 1318

• Enter 4 digits

• 24-hour time format

3. Press the following keys to set the current date.

Example: January 8, 2001 = 010108

• Enter 6 digits

• Enter last 2 digits for year set. (2001 →01)

4. You can set only one tax calculation system – either an add-on or an add-in depending on the

laws in your area. Press the following keys to set the tax rate.

Example: Set tax rate 1 as 5.25% and tax rate 2 as 10%.

• See page 21 to specify the tax system and rounding for details.

5. Press the following keys to preset tax status of departments.

Tax status for the Departments are fixed as Non-taxable.

Example: Set Departments 1 and 2 as taxable status 1.

• See page 15 to change the fixed tax status.

Basic Programming for QUICK START

Mode Switch

CAL

REG

OFF

PGM

Programming

P appears in mode display

Setting the current

date

Setting the current

time

Setting the Tax rate

P appears in mode display

?ZXBo

B"XBp

B??Cp

?XXBo

Z?p

B??Cp

?Z?Z?<h

ZCZ<h

Minutes

Time

Day

Year Month

Part-1 QUICK START OPERATION

(to end the time setting)

(to end the date setting)

P3 appears in mode display

Program set code No. for tax rate 1

5.25% tax rate

50 for Round off and 03 for VAT (Value Added Tax)

– Add In

Procedure Purpose

.aso

P appears in mode display

Setting the status of

Departments

50 for Round off and 03 for VAT (Value Added Tax)

– Add In

(to end the setting)

10% tax rate

Program set code No. for tax rate 2

6. For the Euro only

6-1. Press the following keys to define the main currency/print out currency of the subtotal.

6-2. Press the following keys to set the currency exchange rate against the Euro.

P3 appears in mode display

Setting the Euro

P3 appears in mode display

XVXXo

Euro Status

(to end the setting)

Procedure Purpose

Euro status

(1) Main currency = Local, Print out subtotal = Local: ?

(2) Main currency = Euro, Print out subtotal = Euro : Z

(3) Main currency = Local, Print out subtotal = Both: X

(4) Main currency = Euro, Print out subtotal = Both : C

Z>>>o

Z>MMCp

Decimal position

Exchange rate

(up to 6 digits)

Example: (Exchange rate and decimal position)

Currency exchange rate = 1 Euro in local currency

1 Euro = 1.977 DM : Z>MMC

1 Euro = 1957.77319 LIt : Z>BMMMX

Setting the

Australian GST

Procedure Purpose

For Australia only.

You can set some programmable options to suit the Australian GST by the following procedure.

1. Insert the PROGRAM key (marked “PGM”) and rotate to Z position.

2. Press the following keys to program.

?Z?ZX??Zop

If you want to cancel this operation, press oinstead of p.

Procedure Purpose

For the Euro only.

You can restrict the registable currency to the Euro only by the following procedure.

1. Insert the PROGRAM key (marked “PGM”) and rotate to Z position.

2. Issue all reset report including periodic data.

3. Press the following keys to set.

?Z?MX??Xop

If you want to cancel this operation, press oinstead of p.

Restricting the

currency (Euro)

Part-1 QUICK START OPERATION

Andere Handbücher für 120CR

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Casio Kasse Handbücher

Casio

Casio SE-S300 Bedienungsanleitung

Casio

Casio DR-120LB Bedienungsanleitung

Casio

Casio CE-6000 Bedienungsanleitung

Casio

Casio TE-2000 Bedienungsanleitung

Casio

Casio CE-T100 Bedienungsanleitung

Casio

Casio CE-6000 Betriebsanleitung

Casio

Casio QT-2100 Bedienungsanleitung

Casio

Casio TK-T200 Bedienungsanleitung

Casio

Casio TE-100 Bedienungsanleitung

Casio

Casio PCR-T2000 Bedienungsanleitung

Casio

Casio TK-1550 Bedienungsanleitung

Casio

Casio SE-C300 Bedienungsanleitung

Casio

Casio SE-C3500 Bedienungsanleitung

Casio

Casio PCRT275 - Cash Register w/ 15 Depts Bedienungsanleitung

Casio

Casio PCR-450 Montageanleitung

Casio

Casio TE-2200 Bedienungsanleitung

Casio

Casio 130CR Bedienungsanleitung

Casio

Casio PCR-208 Montageanleitung

Casio

Casio SE-C2000 Bedienungsanleitung

Casio

Casio TK-810 Montageanleitung

Casio

Casio CE-300 (EX-247) Bedienungsanleitung

Casio

Casio PCR-365A Montageanleitung

Casio

Casio PCR T265 - Electronic Cash Register Bedienungsanleitung

Casio

Casio TE-8000F Series Betriebsanleitung

Beliebte Kasse Handbücher anderer Marken

Royal

Royal 480nt Bedienungsanleitung

Olivetti

Olivetti ECR 8200 S Bedienungsanleitung

TEC

TEC TEC FS-3600 Bedienungsanleitung

Integrated System Laboratory

Integrated System Laboratory ISL 4006 Bedienungsanleitung

Sam4s

Sam4s ER-380 Fehlerbehebungshandbuch

Sharp

Sharp XE-A206 Stücklistenhandbuch

Samsung

Samsung ER 5215 Bedienungsanleitung

Toast

Toast Toast Bedienungsanleitung

Sharp

Sharp XE-A130 Kurzanleitung

TEC

TEC MA-600-1 series Bedienungsanleitung

QUORION

QUORION CR 1200 Bedienungsanleitung

Olivetti

Olivetti ECR 7700 LD eco Plus Bedienungsanleitung

Sharp

Sharp XE-A137-WH Operation Kurzanleitung

Sharp

Sharp XE-A203 - Cash Register Thermal Printing Graphic Logo... Bedienungsanleitung

TEC

TEC TEC MA-1060 Bedienungsanleitung

ELCOM

ELCOM Euro-2100TE Bedienungsanleitung

American Changer

American Changer CLASSIC Series Bedienungsanleitung

Sam4s

Sam4s ER-180 Bedienungsanleitung