Casio EX-FC150 - EXILIM Digital Camera Bedienungsanleitung

CAS|O

Digital Camera

EX-FC150

User's Guide

Thank you for purchasing this CASIO product.

• Before using it, be sure to read the precautions contained in this User's Guide.

• Keep the User's Guide in a safe place for future reference.

• For the most up-to-date information about this product, visit the official EXILIM

Website at http://www.exilim.com/

WSpecifying Snapshot Image Quality (1_'1 Quality (Snapshot))

[O] (REC) ---* [MENU] ---* Quality Tab ---* [] Quality (Snapshot)

G,ves,magequa,,typr,or,ty

Norma,

Gives the number of images priority

•The "Fine" setting helps to bring out details when shooting dense tree branches or

leaves, a complex pattern, etc.

• Memory capacity (the number of images you can record) will be affected by the

quality settings you configure (page 184).

[O] (REC) ---* [MENU] ---* Quality Tab ---* [] Quality (Movie)

This setting can be used to specify HD or STD as the image quality for movie

recording when HD/STD is selected as the movie mode.

., _Se.ectth.ssett.ngrecordh.gh-def.n.t.on(.0_mov.es(page60_Theaspect

ratio of movies recorded with this setting is 16:9.

i: i Use this setting for standard movie recording. Recording with this setting is

performed using an aspect ratio of 4:3, an image size of 640X480 pixels,

and a frame rate of 30 frames per second. Image quality and image size

settings cannot be changed.

100 Advanced Settings

_Setting the High Speed Movie Frame Rate (HS [] Speed)

[O] (REC) ---_ [MENU] ---_ Quality Tab ---_ HS [] Speed

See page 60 for details.

[O] (REC) ---_ [MENU] ---_ Quality Tab --* Metering

The metering mode determines what part of the subject is metered for exposure.

Multi-pattern metering divides the image into sections and measures

the light in each section for a balanced exposure reading. This type

[] M_jtii of metering provides error-free exposure settings for awide range of

shooting conditions.

Center weighted metering concentrates on the center of the focus

area to measure light. This type of metering is best when you want

some level of control over contrast.

Spot metering takes readings at a very small area. Use this metering

method when you want exposure to be set according to the

brightness of a particular subject, without being affected by

surrounding conditions.

WOptimizing Image Brightness (Lighting)

[O] (REC) ---_ [MENU] ---_ Quality Tab ---_ Lighting

You can usethissetting to optimizethe balance between brightareasand darkareas

when shooting images.

Performs brightness correction.

Does not perform brightness correction.

101 Advanced Settings

_Specifying Flash Intensity (Flash Intensity)

[O] (REC) ---* [MENU] ---* Quality Tab ---* Flash Intensity

You can specify flash intensity to one of five levels from +2 (brightest flash) to -2

(least bright flash).

• Flash intensity may not change when the subject is too far away or too close.

_Using Built-in Color Filters (Color Filter)

[It31] (REC) --* [MENU] --* Quality Tab --* Color Filter

Settings: Off, B/W, Sepia, Red, Green, Blue, Yellow, Pink, and Purple

[O] (REC) --_ [MENU] --_ Quality Tab --_ Sharpness

You can specify one of five sharpness settings from +2 (sharpest) to -2 (least sharp).

[It31] (REC) --* [MENU] --* Quality Tab --* Saturation

You can specify one of five saturation settings from +2 (most saturated) to -2 (least

saturated).

_Adjusting Image Contrast (Contrast)

[it31] (REC) --* [MENU] --* Quality Tab --* Contrast

You can specify one of five contrast settings from +2 (most contrast between light and

dark) to -2 (least contrast between light and dark).

102 Advanced Settings

,_ iJl

See page 28 for the procedure for viewing snapshots.

1. Press [1"_-I] (PLAY) and then use [,] and [_.] to display the movie you

want to view.

2. Press [SET] to start playback. Movie icon: []

Recording time

Image quality

Movie Playback Controls

[4] [1_] (Playback in progress.)

• Each press of either button increases the speed of the

fast forward or fast reverse operation.

• To return to normal playback speed, press [V].

[SET]

[4] [1_] (Playback paused.)

• Holding down either button scrolls continuously.

Press [V] and then press [A] [V]

• Volume can be adjusted only while movie playback is in

progress.

[A] (DISP)

Slide the zoom controller in the direction of I-,_-](o,.).

• You can use [A], [V], [4], and [1_] to scroll the zoomed

image on the monitor screen. You can zoom a movie

image up to 4.5 times normal size.

[MENU]

• Playback may not be possible for movies not recorded with this camera.

103 Viewing Snapshots and Movies

iiiiiii{i

Each time you perform a continuous shutter (CS) operation, the camera creates a CS

group that includes all of the images for that particular CS session. You can use the

following procedure to play back the images in a particular CS group.

/. Press [1"_-I] (PLAY) and then use [,] and [_.] to display the CS group

whose images you want to view.

Number of ima( CS group icon

the CS group

image in the CS group

2. About one second after you select a CS group, high speed playback of

its images will start automatically.

• After playback of a CS Group is complete, the first image of the group will be

displayed on the monitor screen.

• Pressing [SET] will pause playback. While playback is paused, you can adjust

the playback speed, specify the playback direction, scroll forward or back,

zoom images, and delete images.

CS speed

Current image number/number

of images in the group

Playback guide

104 Viewing Snapshots and Movies

The following are operations that are supported after you press [SET] to

start image playback.

iiii i i

;ii

During playback, changes the playback direction and playback speed.

While playback is paused, scrolls forward or back.

• Playback speed cannot be adjusted while the displayed image is

zoomed.

Toggles between pause and play.

Zooms the image.

• You can use [A], [V], [,], and [1_]to scroll the zoomed image on

the monitor screen.

Exits CS group playback.

Cycles through information display formats.

Displays the "CS Frame Edit" menu.

_NOTE

• Multiple images shot using normal-speed continuous shutter are stored individually

and are not grouped. This means they can be displayed individually (page 28) but

not as a CS group.

You can use the following procedures to delete images while playback is in progress

or paused.

• Deleting a Specific CS Group File

1. While CS image playback is in progress or paused (toggle by pressing

[SET]), press [V].

This will display the "CS Frame Edit"menu.

2. Use[A] and [V] to select "Delete" and then press [SET].

3. Use [,] and [b.] to display the image you want to delete.

4. Use[A] and [V] to select "Delete" and then press [SET].

• To delete other files, repeat steps 3 and 4.

• To exit the delete operation, press [MENU].

105 Viewing Snapshots and Movies

•Deleting All Files in a CS Group

1. While CS image playback is in progress or paused (toggle by pressing

[SET]), press [V].

This will display the "CS Frame Edit"menu.

2. Use [A] and [V] to select "Delete" and then press [SET].

3. Use [A] and [V] to select "Del Group Images" and then press [SET].

4. Use [A] and [V] to select "Yes", and then press [SET].

_NOTE

• Either of the following methods is recommended when you want to keep only one

of the images in a CS group and delete all of the others.

- Copy the image you want to keep to a file located outside of the CS group and

then delete the CS group.

- Protect the image you want to keep and then delete the CS group.

_Dividing Up a CS Group

Use the following to divide up a CS Group into individualimages.

•Dividing Up a Specific CS Group

1. While a CS group is displayed or while the images of a CS group are

scrolling on the monitor screen, press [MENU].

2. Use[,] and [_.] to select the "PLAY" tab.

3. Use [A] and [V] to select "Divide Group" and then press [,].

4. Use [,] and [_.] to display the CS group you want to divide up.

5. Use [A] and [V] to select "Divide" and then press [SET].

• To divide upother CS group files, repeatsteps 4and 5.

106 Viewing Snapshots and Movies

•Dividing Up All CS Groups

-_ iMPORTANT!

•Once a CS group is divided, it cannot be regrouped.

1. While aCS group is displayed or while the images of a CS group are

scrolling on the monitor screen, press [MENU].

2. Use[4] and [b'] to select the "PLAY" tab.

3. Use[A] and [V] to select "Divide Group" and then press [,].

4. Use [A] and [V] to select "Divide All Groups" and then press [SET].

5. Use [A] and [V] to select "Yes", and then press [SET].

WCopying a CS Group Image

Use the following procedure to copy an image in a CS groupto a location outside of

the group.

1. While CS image playback is in progress or paused (toggle by pressing

[SET]), press [V].

This will display the "CS Frame Edit"menu.

2. Use[A] and [V] to select "Copy", and then press [SET].

3. Use [,] and [,] to display the image you want to copy.

4. Use [A] and [V] to select "Copy", and then press [SET].

_NOTE

• The functions below cannot be performed on snapshots inside a CS group. Before

using either of these functions, perform the above procedure to copy the image

first.

White Balance, Brightness, Trimming, Rotation, Resize

107 Viewing Snapshots and Movies

1. In the PLAY mode, use [,] and [_.] to scroll through the images until

the one you want is displayed.

2. Slide the zoom controller towards E¢'I (ck) to

zoom.

You can use [A], [V], [,], and [1_]to scroll the zoomed

image on the monitor screen. Slide the zoom controller

towards _ to unzoom the image.

- When monitor screen contents are turned on, a

graphic in the lower right corner of the screen

shows what part of the zoomed image is currently

displayed.

- To exit the zoom screen, press [MENU].

- Though the maximum image zoom factor is 8X,

certain image sizes may not allow zooming up to

the full 8X.

• Pressing [SET] will lock the current zoom factor for the on-screen image. You

can then use [,] and [1_]to scroll between images, using the same zoom

factor. Pressing [SET] again will unlock the zoom factor and allow you to use

[A], [V], [_] and [1_] to move around the currently displayed images. This

function cannot be used while viewing CS group images or movies. Also, CS

group images and movies will not appear when you are scrolling images with

[4] and [1_].

Zoom factor

Image area

Current display area

1. In the PLAY mode, slide the zoom controller Boundary

towards _(_).

Use [A], [V], [_] and [1_]to move the selection

boundary around the image menu.

To view a particular image, use [A], [V], [4], or [1_] to

move the selection boundary to the image you want and

then press [SET].

• In the case of a movie or a continuous shutter (CS)

file, the first frame of the file will be displayed.

108 Viewing Snapshots and Movies

Andere Handbücher für EX-FC150 - EXILIM Digital Camera

Andere Casio Digitalkamera Handbücher

Casio

Casio Exilim EX-Z4U Gebrauchsanweisung

Casio

Casio EX-FR10 Bedienungsanleitung

Casio

Casio Exilim EX-H10 Bedienungsanleitung

Casio

Casio Exilim MA1010-BMF Bedienungsanleitung

Casio

Casio EX-Z4 - EXILIM Digital Camera Bedienungsanleitung

Casio

Casio QV-200 Bedienungsanleitung

Casio

Casio QV-4000 Bedienungsanleitung

Casio

Casio EX-Z1 - EXILIM Digital Camera Bedienungsanleitung

Casio

Casio EXILIM EX-TR200 Bedienungsanleitung

Casio

Casio QV-R40 Bedienungsanleitung

Casio

Casio EX-Z30/EX-Z40 Bedienungsanleitung

Casio

Casio Exilim EX-ZS6 / EX-Z28 Bedienungsanleitung

Casio

Casio QV-3500 Bedienungsanleitung

Casio

Casio QV-4000 Fehlerbehebungshandbuch

Casio

Casio Exilim EX-Z18 Bedienungsanleitung

Casio

Casio Exilim EX-Z400 Bedienungsanleitung

Casio

Casio Exilim EX-Z5 Bedienungsanleitung

Casio

Casio QV-700 Bedienungsanleitung

Casio

Casio QV-4000 Bedienungsanleitung

Casio

Casio Exilim EX-S880 Bedienungsanleitung

Casio

Casio EX Z80 - EXILIM ZOOM Digital Camera Bedienungsanleitung

Casio

Casio EX-Z155 - EXILIM Digital Camera Bedienungsanleitung

Casio

Casio Exilim EX-Z110 Bedienungsanleitung

Casio

Casio EX-Z25 - EXILIM Digital Camera Bedienungsanleitung

Beliebte Digitalkamera Handbücher anderer Marken

Mercury

Mercury 350K Bedienungsanleitung

Pentax

Pentax Optio LS 465 Bedienungsanleitung

Sanyo

Sanyo VPC-S1085 Bedienungsanleitung

GE SMART A1255 Bedienungsanleitung

Point Grey

Point Grey Gazelle Bedienungsanleitung

Nikon

Nikon COOLPIX A Bedienungsanleitung

Pentax

Pentax P-5 Bedienungsanleitung

BlazeVideo

BlazeVideo A280 Bedienungsanleitung

Sony

Sony MCA-20 Bedienungsanleitung

Sony

Sony Alpha DSLR-A290 Bedienungsanleitung

ATIK Cameras

ATIK Cameras One Bedienungsanleitung

CohuHD Costar

CohuHD Costar 3930 Series Bedienungsanleitung

Leica

Leica M10-R Bedienungsanleitung

FujiFilm

FujiFilm FinePix A700 Bedienungsanleitung

Lorex

Lorex LNZ81P25 Series Bedienungsanleitung

GE J1470S Bedienungsanleitung

Sony

Sony A6700 Benutzerhandbuch

Canon

Canon EOS ELAN7 Bedienungsanleitung