Casio SF-4300R Fehlerbehebungshandbuch
R
(with price)
SF-4300R(LX-546)
OCT. 1994
SF-4300R
CONTENTS
1. SCHEMATIC DIAGRAM.................................................................................................... 1
1-1. MAIN PCB.................................................................................................................. 1
1-2. KEY MATRIX ............................................................................................................. 2
2. SPECIFICATIONS ............................................................................................................. 3
3. TO REPLACE THE BATTERIES....................................................................................... 5
4. DATA TRANSFER............................................................................................................. 6
5. OPERATION REFERENCE............................................................................................. 10
5-1. RESET OPERATION ............................................................................................... 10
5-2. TO ADJUST THE DISPLAY CONTRAST ............................................................... 11
5-3. TO CHECK THE MEMORY STATUS ...................................................................... 11
5-4. THE SOUND MENU................................................................................................. 11
6. LSI, IC (Pin function) ...................................................................................................... 12
6-1. CPU .......................................................................................................................... 12
6-2. RAM:MB84256A-70/10LL (LSI3), ROM:µPD23C1001EAGW-K81 (LSI4) ............. 13
6-3. VOLTAGE REGULATOR:S-81253SGUP (REG1) .................................................. 14
6-4. VOLTAGE DETECTOR:S-80752AN (DET1)........................................................... 14
7. TROUBLESHOOTING..................................................................................................... 15
8. HARD CHECK ................................................................................................................. 18
9. ASSEMBLY VIEW ........................................................................................................... 23
10. PARTS LIST .................................................................................................................... 25
— 1 —
1. SCHEMATIC DIAGRAM
1-1. MAIN PCB
— 2 —
1-2. KEY MATRIX
— 3 —
2. SPECIFICATIONS
Main Modes:
Telephone Directory, Memo, Schedule Keeper, Reminder, Calendar, Home Time, World Time and
Calculator.
Data storage:
Storage and recall of telephone, memo, schedule, reminder data; calendar display; secret area; editing;
memory status display.
Clock:
World time; reminder alarm; schedule alarm; daily alarm; accuracy under normal temperatures: ±3
seconds average.
Calculation:
10-digit arithmetic calculations; arithmetic constants (+, –, ×, ÷); independent memory; percentages;
square roots; 20-digit approximations; date calculations; other mixed calculations.
General:
Display element: 16-column ×4-line LCD
Memory capacity: 32 KB (28579 bytes)
Main component: LSI (The LX-546AQ is with an outside ROM, LSI4.)
Power supply: 2 lithium batteries (CR2032)
Power consumption: 0.05W
Battery life:
Approximately 400 hours continuous operation in Telephone Directory
Approximately 350 hours repeating one minute of input and 10 minutes of display in Telephone
Directory
Approximately 12 months for memory back up
Auto power off: Approximately 6 minutes after last key operation
Operating temperature: 0°C ~ 40°C (32°F ~ 104°F)
Dimensions:
Unfolded: 9.6H ×122W ×158.5Dmm (3/8"H ×4 3/4"W ×6 1/4"D)
Folded: 12.4H ×122W ×81.5Dmm (1/2"H ×4 3/4"W ×3 1/4"D)
Weight: 89g (3.1 oz)
Current consumption:
Storage Capacity:
The 32K bytes memory capacity includes a 28579 bytes user area. The following shows examples
of what this means for the storage of data in each mode.
Telephone Directory:
Approximately 1360, under the following conditions: 8-character name
10-character telephone number
Approximately 680, under the following conditions: 8-character name
10-character telephone number
20-character address
Memo:Approximately 1290, 20-character memos
Power switch TYP. [µA] MAX [µA]
OFF — 20
ON — 550
— 4 —
Schedule Keeper:
Approximately 890, under the following conditions:
1 item per day, 20 characters per item
30 days per month
Starting time specified, alarm time set
Approximately 1020, under the following conditions:
1 item per day, 20 characters per item
30 days per month
Starting time specified, no alarm time
Reminder:
Approximately 1680, under the following conditions: 10 characters per item
Alarm time set
Approximately 1900, under the following conditions: 10 characters per item
No alarm time
— 5 —
3. TO REPLACE THE BATTERIES
1) Loosen the screw on the back of the SF-4300B that
holds the battery compartment cover in place, and
remove the cover.
2) Loosen the screw that secures one of the two battery
holders in place and remove the battery holder.
Caution
Be sure to remove only one battery at a time.
Otherwise, you will lose all data stored in memory.
3) Replace the old battery with a new one, making sure
that the positive (+) side of the new battery is facing up
(so you can see it).
4) Replace the battery holder and secure it by tightening its screw.
• Be careful that you do not over tighten the screw.
5) Repeat steps 2) through 4) for another battery.
• Be sure to replace all two batteries. Never mix old batteries with new ones, and be sure to use
CR2032 lithium batteries only.
6) After you replace all two batteries, replace the battery compartment cover and secure it by tightening
its screw.
• Be careful that you do not over tighten the screw.
Screw
RESET
— 6 —
2) Turn on the power switch of each machine.
3) The slavemachinemustbe setthe date of Feb. 3rd, 1901 into the memory under thecalculator mode.
Operation: 1. Press
2. Select "CAL" mode or press 6.
3.
If you don't set the date, the "PASSWORD" isn't transferred to the slave machine.
4. DATA TRANSFER
SF-4300R can transfer customers data to other SF-4300R with memory protection only when replacing
the LCD or the outer case. How to transfer the data.
* Before connecting the cable (SB-60/62), be sure to reset the slave machine to clear all data.
1) Turn off the power switch and connect the two units using the cable (SB-60/62) as shown in the
drawing.
M SUN
1901/ 2/ 3
SB-60/62 accessory cable
ON MENU
TIME TIME TIME M+
DATE DATE DATE R
123
— 7 —
Setting up for Data Communications
The following procedures describe what you should do to set up for data communications between
two SF Units or between an SF Unit and a personal computer. In addition to hardware connections,
it details how to set up the communications parameters and how to set up the SF-4300R to receive
data. By following these instructions carefully, you can be ensured of successful communications
every time.
To connect two SF Units
1. Check to make sure that the power of the two SF Units is switched off.
2. Remove the covers from the connectors on the two SF Units.
3. Connect the two SF Units using the optional SB-60/62 cable. You can also connect them using
an SB-60/62 cable.
Important
Be sure to replace the connector covers on the SF Units when you are not performing data
communications.
4) Check the hardware parameters.
1. Select "TEL" mode or press 1under MENU screen.
2. Press FUNC twice to display the second function menu.
• You can perform the above operation while the initial screen of the Memo Mode, Schedule
Keeper, Calendar, or Reminder is displayed also.
3. Press 4 to select DATA COMM.
4. Press 3 to select SET UP.
*If the password isn't
registered in the SF unit,
display shows Xinstead
of "1".
✻✻ SET UP PAR. ✻✻✻
PARITY E O N
BIT LENGTH 78
BPS 4800 9600
3
1* TO SECRET AREA
2 ALL DELETE
3 LABEL EDIT
4 DATA COMM
1 SEND
2 RECEIVE
3 SET UP PAR.
CAPS
CAPS
•Nis blinking.
CAPS
4
FUNC FUNC
— 8 —
*If the password isn't
registered in the SF unit,
display shows X instead
of "1".
5. If the units have another condition, reset as above.
• To change the parameters
1. Use the and — cursor keys to change the selected parameter on the display.
2. Use the and cursor keys to change the high-lighted setting of the currently selected
parameter.
3. Press SET to store them in memory.
5) Set up the slave machine
1. While an initial screen is displayed, press FUNC twice to display the second function menu.
• You can perform the above operation while the initial screen of the Memo Mode, Schedule
Keeper, Calendar, or Reminder is displayed also.
2. Press 4 to select DATA COMM.
3. Press 2 to select RECEIVE.
6) Set up the customer’s machine.
1. While an initial screen is displayed, press FUNC twice to display the second function menu.
• You can perform the above operation while the initial screen of the Memo Mode, Schedule
Keeper, Calendar, or Reminder is displayed also.
*If the password isn't
registered in the SF unit,
display shows X instead
of "1".
1* TO SECRET AREA
2 ALL DELETE
3 LABEL EDIT
4 DATA COMM
SET
2
4
1 SEND
2 RECEIVE
3 SET UP PAR.
1* TO SECRET AREA
2 ALL DELETE
3 LABEL EDIT
4 DATA COMM
DATA
RECEIVE OK
TO STOP
PRESS (ESC)
CAPS
CAPS
CAPS
CAPS
FUNC FUNC
FUNC FUNC
Andere Handbücher für SF-4300R
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Casio PDA Handbücher
Casio
Casio IT-800 Series Bedienungsanleitung
Casio
Casio PV-100 Bedienungsanleitung
Casio
Casio PB-2000C Fehlerbehebungshandbuch
Casio
Casio CASSIOPEIA IT-2000D Bedienungsanleitung
Casio
Casio PB-2000C Bedienungsanleitung
Casio
Casio SF-R10 Bedienungsanleitung
Casio
Casio FP-200 Bedienungsanleitung
Casio
Casio PV-750 Plus Bedienungsanleitung
Casio
Casio CASSIOPEIA E-11 Bedienungsanleitung
Casio
Casio CSF-8950 Fehlerbehebungshandbuch
Casio
Casio Cassiopeia PA-2400 Bedienungsanleitung
Casio
Casio PV-S250 Bedienungsanleitung
Casio
Casio PV-S250 Bedienungsanleitung
Casio
Casio SF-9700 Bedienungsanleitung
Casio
Casio NX-4000 Fehlerbehebungshandbuch
Casio
Casio PV-250X Bedienungsanleitung
Casio
Casio CSF-4450 Fehlerbehebungshandbuch
Casio
Casio Palm-size PC Bedienungsanleitung
Casio
Casio PV-S250 Bedienungsanleitung
Casio
Casio Cassiopeia EM-500 Bedienungsanleitung
